BRUTE PERFORMANCE

07/16/2026

KRX OEM rear stub shaft are currently on backorder with Kawasaki.

We have 2 oem ones left in stock or we have plenty of our HD Upgraded rear stubs if you need one.

Oem - https://bruteperformance.com/krx-1000-oem-rear-stub-shaft
Upgraded Stub shaft - https://bruteperformance.com/krx-1000-bp-rear-stub-shaft

KRX 1000 BP REAR STUB SHAFT

07/16/2026

KRX FUEL PUMP ASSEMBLY

https://bruteperformance.com/krx-1000-fuel-pump-assembly/?searchid=2133&search_query=krx+fuel+pump

We are the only ones to provide the proper OEM filter and lower housing.

DO NOT USE AFTERMARKET FUEL FILTERS.

- All pumps include a new installed OEM fuel filter and the correct lower housing.

- Our housing modification has been done to increase reliability and flow potential, resulting in a longer lasting, more reliable unit.

What we do is take the output from a coffee straw to a McDonalds size straw, resulting in less strain on the pump for longer and cooler pump life.

- This brand new drop-in unit will get your machine back up and running with proper fuel pressure.

- 43 psi is needed for these machines to run properly. No, the fuel rail does not starve the second cylinder.

- The assembly includes the fuel pump motor, float, and fuel pressure regulator.

Optional Add-On:

Add on our Kawasaki Specific Fuel Pressure Tester Inline Gauge to help diagnose fuel pressure related issues. Has a Kawasaki specific connector for plug and play use.

07/16/2026

KRX BP DIFF LOCK GEAR DISASTER REBUILD KIT

https://bruteperformance.com/krx-1000-bp-diff-lock-gear-disaster-rebuild-kit/

We got a couple in stock! We have ones for the KRX, RIDGE, and H2!

Rebuild your front differential after a diff lock gear failure with the Brute Performance Front Differential Disaster Rebuild Kit.

Please Note, This kit will not repair a broken main differential case.

Kit Includes:

- OEM Cover Plate

- OEM Cover Plate Bearing

- OEM Axle Seal

- OEM Diff Lock Shift Fork

- Brute Performance Actuator O-Ring

- Brute Performance Cover Plate Dowel Pins

- Brute Performance Diff Lock Shift Fork Shaft

- Brute Performance Diff Lock Gear Upgrade

- Brute Performance Shifter Mechanism Shim Kit

07/16/2026

EPI TERYX 800 SPRING CLUTCH KIT

https://bruteperformance.com/epi-teryx-800-spring-clutch-kit/

Just got some more back in stock!

Fits:
2012–2013 Kawasaki Teryx 4 750
2014–Current Teryx 800
2014–Current Teryx 4 800

Features:
- EPI Spring Clutch Kit
- Part
- Bolt-on spring kit to help regain power lost from larger tires
- Spring kit only (no clutch weights included)
- Keeps the clutch system in a lower "gear" for improved power delivery
- Improves belt grip and backshift
- Ideal for machines running oversized tires

Includes:
- Bright Yellow Primary Spring
29 lbs / 75 lbs / 260 lbs
- White Secondary Spring
215 lbs / 350 lbs
-Pink Secondary Spring
235 lbs / 385 lbs

Installation:
- A secondary clutch spring compression tool is required to remove and install the secondary spring.
- A tool can be purchased or fabricated. See product photos for reference.

07/16/2026

H2 SHIFTER BEZEL SHIFT GATE

https://bruteperformance.com/h2-1000-shifter-bezel-shift-gate/?searchid=2128&search_query=shifter+bezzle

Fits: Kawasaki H2 All Models/Years

Replace the stock plastic shifter bezel and eliminate the maze-like shifting.
Smoothly shift through all gears.
Left side: Standard gear changes
Right side: Easily shift between Low and Reverse

Our unique design moves the shift gates farther to the right to keep the shifter farther away from the driver for better ergonomics.

Features:
- Hardcoat anodized black finish resists wear and ensures long-term durability
- Smooth, radiused surfaces throughout help prevent excessive wear on the shift rod (scratches may still occur)
- Oversized mounting holes allow perfect alignment during installation
- Reuses factory hardware for a simple install

07/16/2026

KRX SHIFTER BEZEL SHIFT GATE

https://bruteperformance.com/krx-1000-shifter-bezel-shift-gate/?searchid=2126&search_query=shifter+bezzzel

Fits: Kawasaki KRX 1000 All Models/Years

Our unique design moves the shift gates farther to the right to keep the shifter farther away from the driver for better ergonomics.

Replace the stock plastic shifter bezel and eliminate the maze-like shifting.
Smoothly shift through all gears.
Left side: Standard gear changes
Right side: Easily shift between Low and Reverse

Features:
- Hardcoat anodized black finish resists wear and ensures long-term durability
- Smooth, radiused surfaces throughout help prevent excessive wear on the shift rod (scratches may still occur)
- Oversized mounting holes allow perfect alignment during installation
- Reuses factory hardware for a simple install

Installation Notes:
Disassemble the surrounding plastics as needed to access and remove the four bolts securing the original shifter bezel.

Reuse the factory hardware for installation.

07/16/2026

RIDGE SHIFTER BEZEL SHIFT GATE

https://bruteperformance.com/ridge-1000-shifter-bezel-shift-gate/?searchid=2124&search_query=shifter+bezzzel

Fits: Kawasaki Ridge 1000 All Models/Years

Replace the stock plastic shifter bezel and eliminate the maze-like shifting.

Smoothly shift through all gears.

Left side: Standard gear changes

Right side: Easily shift between Low and Reverse

Features:
- Hardcoat anodized black finish resists wear and ensures long-term durability
- Smooth, radiused surfaces throughout help prevent excessive wear on the shift rod (scratches may still occur)
- Oversized mounting holes allow perfect alignment during installation
- Reuses factory hardware for a simple install

07/16/2026

KRX OEM FRONT STUB SHAFT ASSEMBLY

https://bruteperformance.com/krx-1000-oem-front-stub-shaft-assembly/?searchid=2123&search_query=krx+oem+front

Fits all years models KRX 1000.

- This is the cover plate that houses the input shaft on the front differential.
- Part #16146-0740
- Assembled with stub roller bearing and seal
- Needle bearing is the bearing on the back side that goes into the pinion

Our heavy-duty stub shaft is engineered to replace the OEM part, eliminating the weak spot found in the original shafts. This upgraded stub provides superior durability and performance, ensuring a longer-lasting drivetrain.

07/16/2026

GLAD TO BE A PART OF THIS TEAM!

RACE TESTED PARTS FOR THE WIN

07/16/2026

KRX BRAKE MASTER CYLINDER UPGRADE

https://bruteperformance.com/krx-1000-brake-master-cylinder-upgrade/

Just got more in stock, if you wanna upgrade your braking system for improved performance and reliability! Then is the perfect solution for you!

Fits: Kawasaki KRX 1000 All Models (2020–Current)