Red Line Land Cruisers

Red Line Land Cruisers Full-service repair & restomod shop for Toyota Land Cruisers. Servicing and preparing Toyota Land Cruisers since 2007. We revive classics the right way!

Home of the FJ40 2.5" Lift Kit and the Holley Sniper EFI conversion parts specialist for F/2F Engines. We don't cut corners, offer factory-quality installation, and provide restomod comforts with the best parts available. We work with you on every detail to build the truck of your dreams. We build classic 4x4s for future generations. Red Line Land Cruisers revives Toyota Land Cruisers and other vintage 4x4 vehicles. Our passion comes from years of building Rock Rods, custom 4x4 vehicles capable of tackling the most challenging off-road trails and cruising the highways. When we take in a vehicle, the vehicle tells us what it needs. During our intake process, we review every component to determine what the truck wants and needs. We then look at your goals for the vehicle and help you achieve that goal in the best way possible. No matter what your vision is for the vehicle, Red Line Land Cruisers can build it. From classic restorations, Resto-Mods, or our favorite Rock Rods, we will ensure your vehicle rolls out of our shop in factory-fresh condition, built for adventure!

This Fixed Or***ce PCV Valve is ONLY for those with a Holley Sniper EFI system on an 1F or 2F Toyota engine. (Choose in ...
09/24/2026

This Fixed Or***ce PCV Valve is ONLY for those with a Holley Sniper EFI system on an 1F or 2F Toyota engine. (Choose in the drop down menu). The Holley Sniper EFI’s (IAC) Idle Air Control Valve does not work with the factory Toyota “self-regulating” PCV Valve and this is what causes the “hunting idle” issue. No one makes an Fixed Or***ce PCV Valve in our hose specification, so we made them! See our 1F or 2F Kits for your Toyota Land Cruiser: https://redlinelandcruisers.com/product/fixed-orifice-pcv-valve-for-holley-sniper-efi-sn3-7-rl1393-1f-or-rl1393-2f/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.
***cePCVvalve

No, we are not building high-horsepower F/2F engines to the point we are lifting heads! BUT, we are rebuilding these old...
09/23/2026

No, we are not building high-horsepower F/2F engines to the point we are lifting heads! BUT, we are rebuilding these old F/2F engine to the point where it is a scenario of tearing down engines just to get hardware of which we have to clean, resurface and such. Plus, we are looking to start fresh and not have to recycle parts, nor MODIFY! When we mill a cylinder head for more compression, the factory Toyota head bolts will need to be modified. Our bolts allow us to use a combination of piston-rod-cylinder head combinations without worrying about bolt-stud length or strength.

We have two kit versions to allow for Engine Hook Mount (x2 Long) and Power Steering Mount (x4 Long). Thus, approached ARP to manufacture brand new head bolt studs to our specifications for the purpose of rebuilding these Toyota Land Cruiser engines with new hardware, allowing various Auxiliary assemblies / apparatus or appendages. https://redlinelandcruisers.com/product/head-bolt-stud-kit-arp-for-1f-2f-engine-fj40-land-cruiser-en12-rl1408/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

SOON - BACK IN STOCK! Taking Pre-Orders with special pre-delivery pricing for the most comprehensive 2.5" Lift Kit avail...
09/23/2026

SOON - BACK IN STOCK! Taking Pre-Orders with special pre-delivery pricing for the most comprehensive 2.5" Lift Kit available for your FJ40 Land Cruiser. We know you have choices from reputable brands when purchasing a suspension kit for your FJ40 Land Cruiser. But we have painstakingly taken on the task of making the best ride quality from leaf springs, in a 2.5" lift kit that is 100% specifically designed for the FJ40 Land Cruiser. This system has set a new performance and ride quality standard, delivering an unmatched on/off-road experience. We truly believe in it! Ask the customers who've already purchased them! OR, come visit us in Colorado Springs and take us up on a test-ride first!

CONTENTS:
• Front and Rear Leaf Springs
• Caster Plates Pre-mounted on Front Leaf Springs
• Polyurethane Bushing Kit; front & rear + frame side
• U-Bolts with acorn nuts, specifically sized
• Greaseable Shackles, Front and Rear with part numbers
• Greaseable Pins, Front and Rear
• Steering Damper with mounting hardware
• Drop-down Brake Line, Front and Rear axle
• Bilstein Shocks, Front and Rear
* OPTIONAL: New Suspension Washer and Nut Kit (Castle Nuts or Standard Nuts)
** OPTIONAL: New U-Bolt Plates (1958 – 7/80 Only)

MORE DETAILS:
SEND EMAIL REQUEST TO: [email protected]
1] Vehicle Details [MONTH / YEAR] of your FJ40.
2] WEIGHT CLASS FROM INFO on webpage
3] SHIPPING ADDRESS.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

100 Series Land Cruiser & Lexus LX470 — U.S. Market One-Sheet • The two badges are near parity in the middle of the mark...
09/22/2026

100 Series Land Cruiser & Lexus LX470 — U.S. Market One-Sheet • The two badges are near parity in the middle of the market. They diverge at the extremes — the Toyota commands a meaningful premium at the top (collector/enthusiast money chases the Toyota badge and the non-AHC suspension), while the Lexus is the better value in the $12K–$25K driver band because it was optioned better and generally lived an easier life. Read the full dossier: https://redlinelandcruisers.com/100-series-land-cruiser-lexus-lx470-u-s-market-one-sheet/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

FJ40 Camshaft Thrust Plate and Bolts w/ Washers for F / 2F Camshaft for F-Series Toyota Land Cruiser RL1212-B. Fits 1958...
09/22/2026

FJ40 Camshaft Thrust Plate and Bolts w/ Washers for F / 2F Camshaft for F-Series Toyota Land Cruiser RL1212-B. Fits 1958 - 08/1992 F, 2F, 3F gas engines. Comes with hardware. https://redlinelandcruisers.com/product/camshaft-thrust-plate-and-bolts-w-washers-for-f-2f-camshaft-fj40-toyota-land-cruiser-rl1212-b-en6-8/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

Red Line 1F Oil Line Conversion Kit for F145 and F155 Toyota Engine (3/69 – 9/73) RL1055 (EN2-1) SAVE THE F-SERIES!!! He...
09/21/2026

Red Line 1F Oil Line Conversion Kit for F145 and F155 Toyota Engine (3/69 – 9/73) RL1055 (EN2-1) SAVE THE F-SERIES!!! Here at Red Line Land Cruisers, we simply love F-Series Land Cruiser engines! Over the years of working on these 50-year-old Toyotas, we’ve run into problems on numerous occasions with the 1F engines. The remote oil filter “soft-lines” have hardened, cracked, and subsequently leaked. To top it off, Toyota discontinued the 90923-03011 1F Oil Filter Inlet Hoses.
https://redlinelandcruisers.com/product/1f-oil-line-kit/
With the revival and upgrading of many of these FJ40 Toyota 1F engines, we needed to replace these forever-out-of-stock Toyota oil lines. We also needed a lengthened version to make room for the addition of aftermarket headers. We developed the RL1055 Red Line 1F Oil Line Conversion Kit that actually works with the correct thread-pitch fittings at the engine block, oil pressure regulator, and oil filter bracket! Spend the extra time cleaning, chasing, and verifying the threads before shoving the bolts in. I hope for the best! Remember, you are working on a vintage vehicle.
https://redlinelandcruisers.com/product/1f-oil-line-kit/

• FITS ONLY: F-145 and F-155 Toyota engines.
(Years of 3/69 – 9/73) Toyota Land Cruisers
• Will NOT fit the F-135 Toyota engine – Years of 1958 – 3/69..................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

Yes, Red Line Land Cruiser is going totally bonkers on F and 2F inline six engines! These are our new LFSS Push Rods des...
09/21/2026

Yes, Red Line Land Cruiser is going totally bonkers on F and 2F inline six engines! These are our new LFSS Push Rods designed specifically for our F-Series and 2F engine needs. These are not made from reconditioned factory Toyota push rods. These push rods are Lighter than stock, Stronger than stock and most importantly, they are STRAIGHT! No more sifting through three used engines worth of push rods to assemble a decent set to only be send out and have them reconditioned! NO MORE!

https://redlinelandcruisers.com/product/lfss-push-rods-f-2f-engine-red-line-land-cruisers/

Red Line Land Cruisers is very passionate about these engines and we saw only one solution to this problem – make push rods from scratch! Our one-piece pushrods are made from heat treated 4135 Chromoly Steel, produced via a proprietary multi-step process and go through a 100% inspection process to insure our finished lengths are precise and the perfection we desire! These are brand new push rods specifically designed for F and 2F engines and they are Lighter, Faster, Straighter and Stronger than stock Toyota F-Series push rods!

TWO CHOICES:
LFSS Push Rod, 1F-Engine (1968 – 1979), Red Line Land Cruisers – RL1361-6879
LFSS Push Rod, 2F-Engine (1980 – 1987), Red Line Land Cruisers – RL1361-8087
https://redlinelandcruisers.com/product/lfss-push-rods-f-2f-engine-red-line-land-cruisers/
-------------------------------------
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

This is a 1F Cylinder Head that is refurbished, all mating surfaces precisely machined and decked with 8.5/1 Compression...
09/20/2026

This is a 1F Cylinder Head that is refurbished, all mating surfaces precisely machined and decked with 8.5/1 Compression. This Toyota FJ40 cylinder head is equipped with LS Valves. Casting No. 60031. Give your 1F flat-top piston engine a 7 - 10% bump in power. https://redlinelandcruisers.com/product/1f-cylinder-head-refurbished-8-5-1-compression-ls-valves-casting-no-60031-1968-late-1971-fj40-land-cruiser-el-3/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

We've discovered that some of you are crossing your fingers and "cross-threading" the Sniper Coolant Sensor NTP threads ...
09/20/2026

We've discovered that some of you are crossing your fingers and "cross-threading" the Sniper Coolant Sensor NTP threads into the Toyota 2F Coolant Drain, which is technically a BSPT threaded port (British Standard Pipe Taper). Maybe you are sealing it with some super-sealant or "gorilla-torquing" it to "permanently sealed" status. While the "cross-threaded way" may be a "fix-it-and-forget-it" backyard solution, we built a serviceable solution system. Toyota Land Cruiser cylinder heads come in "two flavors!" Why does this matter? Toyota Land Cruiser cylinder heads come equipped as either 2-Port or 3-Port (coolant ports) across the range of 40/60-Series Land Cruisers. When adding the Holley Sniper System to your 40/60-Series, the head unit is equipped with an electronic water temperature sensor. If the cylinder head is the 3-Port design, use our 2F/F Reducing Bushing (included in the pull-down option) for the Holley Sniper Coolant Temperature Sensor and disregard this Thermostat Housing Modification. But, if your 2F Cylinder Head is a 2-Port design, you can use our RL1076 2F Modified Thermostat Housing Kit to have a location suitable for the Holley Sniper Coolant Temp Sensor. If your Toyota 2F FJ60 Cylinder Head is a 2-Port design, we've modified the lower thermostat housing so you can install the Holley Sniper Coolant Temperature Sensor. If you have a 1F 2-Port design head (11101-60031 castings or earlier), then see our 60031 Sniper Thermo Housing Mod Kit. https://redlinelandcruisers.com/product/2f-sniper-thermo-housing/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

Do you use Jerry cans to transport additional fuel for long adventures? Don’t dead-lift forty pounds of fuel up in the a...
09/19/2026

Do you use Jerry cans to transport additional fuel for long adventures? Don’t dead-lift forty pounds of fuel up in the air using some flimsy spout to get that five gallons of fuel into your rig! The safe and innovative way to transfer fuel from a jerry can into your vehicle is with the use of the Original Safety Siphon. Watch the video and see how easy this works!
https://redlinelandcruisers.com/product/the-original-safety-siphon/.................................................
RED LINE LAND CRUISERS
719.638.2003
Servicing and preparing Toyota Land Cruisers for epic adventures since 2007 from Colorado Springs, Colorado.

Address

1050 Ford Street
Colorado Springs, CO
80915

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+17196382003

Website

Alerts

Be the first to know and let us send you an email when Red Line Land Cruisers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Red Line Land Cruisers:

Shortcuts

Share

Category