Pro Image Automotive

Pro Image Automotive Pro Image Automotive is a Mechanical business based in south east Melbourne. Specializing in Airbag

REDLINE 💎Ashleigh Lindsay definitely had the right idea 👌🏻 Before even picking up his new-to-him VF SSV Redline Ute, he ...
08/09/2026

REDLINE 💎

Ashleigh Lindsay definitely had the right idea 👌🏻 Before even picking up his new-to-him VF SSV Redline Ute, he had it booked in with us for a new stance and wheels.

Rear end received an airbag kit, completely hidden away with an upgraded compressor, our custom compressor/valve brackets, remote water trap and drain, all controlled through switches and a gauge neatly mounted in the centre console.

Up front we fitted MCA Suspension Pro Street coilovers. These really are one of the best investments you can make when it comes to getting the stance you want without sacrificing ride quality — a massive step up over the cheaper options on the market.

To finish it off, we fitted the 22-inch Walkys that Wal supplied, completely transforming the look of the ute 💎

Simple setup, clean install and a massive change to the overall stance.

Thanks again mate 🍻

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

FOR SALE 🤑1964 Ford LWB F100, LHD with import approval.- Cut Weld Drive complete chassis with fuel tank- Extremely dry a...
07/09/2026

FOR SALE 🤑

1964 Ford LWB F100, LHD with import approval.
- Cut Weld Drive complete chassis with fuel tank
- Extremely dry and straight patina’d body
- Suspension air management
- injected 302 with auto
- 20 inch smoothies
- disk front brakes
- 9 inch with tail shaft

This is an unfinished project but all big ticket items purchased, over well over $100k to get it to this point and if you’ve been following current auctions these things are fetching well over $200k finished.

We would love to finish the truck in 2027 however we can also assist other workshops with all engineering.
We also offer finance and interstate transportation.

$60,000 AUD located Pakenham, get in contact with us 👇🏻

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

LA CAMIONETA 🇲🇽This is the result of where attention to detail and passion meet engineering, quality and knowledge.Start...
01/09/2026

LA CAMIONETA 🇲🇽

This is the result of where attention to detail and passion meet engineering, quality and knowledge.

Starting with a rolling shell, we transformed this ’64 Bel Air Wagon into a properly sorted, fully engineered cruiser.

🔧 THE BUILD:

• Metal-finished shaved firewall, painted body colour
• Metal-finished inner guards, powder coated satin black
• Supplied cammed 327ci SBC with genuine Chevrolet script rocker covers
• Restored factory 4-barrel air cleaner
• Electronic ignition
• Alloy radiator with twin thermo fans and Dakota Digital fan controlleri
• Twin-circuit brake master cylinder with booster and hidden proportioning valve
• All-new brake lines throughout
• Front disc brake conversion — designed to clear 13” and 14” wheels
• Rack-and-pinion steering conversion
• TH700 4-speed auto, still shifted from the factory column — one of the best upgrades you can do to an old cruiser
• Hidden Astra electric power steering pump
• Custom tailshaft with billet centre bearing
• Front and rear airbags, FAE tested and approved
• Relocated front shocks
• Full-length 2.5” exhaust with crossover, tucked up to clear with the chassis on the ground
• Pro Image Automotive adjustable chromoly Y-bar
• Pro Image Automotive chromoly lower rear airbag arms
• Dakota Digital dash
• Hidden and relocated RedTop battery
• Hidden 5-gallon air tank with custom TIG-welded brackets
• Twin VIAIR | 12V and 24V Air Compressors 444C compressors
• Suspension e-Level+ air management system

And of course, the most important part — a full Victorian engineer’s certificate, making this low wagon 100% street legal. ✅

If you’re looking to take your investment to the next level without sacrificing legality, quality or drivability, send us a message.

Massive thank you to for supplying the parts and 𝒢𝑜𝓁𝒹 𝒞𝓁𝒶𝓈𝓈 𝒟𝑒𝓉𝒶𝒾𝓁𝒾𝓃𝑔 ♛ for making sure it looked the goods the day before MotorEx. 🤝

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

BIG NEWS 🔥We’re stoked to announce Pro Image Automotive is now an authorised Manta Performance Exhausts dealer! 🇦🇺We’ve ...
12/08/2026

BIG NEWS 🔥

We’re stoked to announce Pro Image Automotive is now an authorised Manta Performance Exhausts dealer! 🇦🇺

We’ve been doing plenty of custom exhaust work over the years, but we know a full custom system isn’t necessary for every car. Being a Manta dealer now gives us a massive range of quality, Australian-made bolt-on systems we can supply and fit right here in-house.

Whether it’s a 4x4, street car, tow rig or American truck, there’s a bloody good chance Manta has something on the shelf for it.

🇦🇺 Australian Made
✅ 10 Year Warranty
🔥 Huge range of performance systems
🔧 Supplied & fitted by us

And most importantly — they look good, fit properly and sound tough.

If you’ve been thinking about giving your car a bit more bark, shoot us a message with your make, model and year and we’ll see what we can put together.

*Another quality Aussie brand we’re proud to have behind us at Pro Image 🤝

ONE OF OUR MOST POPULAR PACKAGES! 🔥Another VE/VF through the shop for the full treatment — front and rear airbags, finis...
09/08/2026

ONE OF OUR MOST POPULAR PACKAGES! 🔥

Another VE/VF through the shop for the full treatment — front and rear airbags, finished off with a full Victorian Engineer’s Certificate, making this super low-km VE SSV completely street legal. 😎

This one received:

Air Ride Suspension Supplies bolt-in front struts with 25 points of dampening adjustment

Suspension e-Level+ air management

Twin chrome VIAIR | 12V and 24V Air Compressors 444C compressors

5-gallon tank with corrected leg mounts

Our own laser-cut compressor brackets, professionally TIG welded and colour coded to the body

Custom hardlines finished with Swagelok fittings

Finished off with fitting staggered Simmons Wheels Australia FR’s, correcting the previous guard rolling attempts then carrying out specialised wheel alignment.

Another properly installed, properly engineered VE/VF ready to hit the streets. 👌

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

Simple, clean and built to perform.This tubbed Tri-Five Chevy now wears a twin 3-inch stainless header-back exhaust, fea...
07/08/2026

Simple, clean and built to perform.

This tubbed Tri-Five Chevy now wears a twin 3-inch stainless header-back exhaust, featuring an X-pipe, chambered MagnaFlow Performance Exhaust mufflers and V-band diff dumps for easy removal and servicing.

No unnecessary gimmicks—just quality TIG fabrication, tight fitment and a deep muscle car note that suits the build perfectly. 🔥

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

DRAMAS 😬After hearing some concerning noises from the front suspension, the owner of this Golf tried to make it to their...
07/08/2026

DRAMAS 😬

After hearing some concerning noises from the front suspension, the owner of this Golf tried to make it to their mechanic but unfortunately didn’t quite get there. Luckily, Fastpace Towing got the car safely to us, where we quickly diagnosed the issue and had the correct replacement part sourced from Air Ride Suspension Supplies within the hour, getting the customer back on the road as soon as possible.

Unfortunately, this failure was completely avoidable. Inferior components and poor installation can end up costing far more in the long run than investing in a quality system from the start.

We’ve recommended a complete removal and reinstall of the air suspension system using premium components from Air Ride Suspension Supplies, installed to the standard we’d trust on our own vehicles.

If you’ve noticed unusual noises, uneven ride height, slow leaks, or you’re simply unsure about the quality of your air suspension setup, don’t leave it until you’re stranded. Send us some photos or book your vehicle in for a thorough safety inspection—we’re always happy to help.

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

One of our coolest builds to date. 🔥The brainchild of Mitch Creek, this truck is proof that thinking outside the box is ...
05/08/2026

One of our coolest builds to date. 🔥

The brainchild of Mitch Creek, this truck is proof that thinking outside the box is what builds something truly special.

With literally hundreds upon hundreds of hours invested, plus countless custom-made parts and fabrication, it’s impossible to fit everything into one post—but here’s the highlight reel.

Stance:
- Front drop spindles with our signature cupped lower control arms
- Completely custom chassis from the cab back, built around our triangulated 4-link centre section
- 7-inch slam bags front and rear
- Suspension e-Level+ air management
- Twin VIAIR | 12V and 24V Air Compressors compressors
- FLO Airride Mfg. billet air tank
- Custom three-piece 20x9 front and 20x11 rear wheels

Driveline:
- Rowdy 502ci big block Chevrolet
- Alloy cylinder heads
- Haltech controlled EFI
- ICE Ignition ignition system
- TH400 with a high-stall converter
- Custom two-piece telescopic tailshaft
- Fabricated 9-inch diff with custom billet axles
- Full 3-inch stainless TIG-welded exhaust from the engine back, complete with remote dumps
- Custom fuel cell with drop-in pump hanger

The finishing touches:
- Full MTX Audio Australia sound system with speakers, subs and amps
- Dakota Digital RTX metric dash
- Fully shaved engine bay
- Rear lift-up bed with timber by regrained
- Complete rewire with hidden battery and isolator
- Custom alloy Pro Touring-style wing

There are still plenty of details we’ve left out, but this build represents exactly what Pro Image Automotive is all about—doing things differently, pushing ourselves, and building vehicles that stand out from the crowd.

A huge thank you to Donburn Customs for the incredible paint and interior, Air Ride Suspension Supplies for supplying quality products, and Sam Carter for capturing this truck so perfectly.

Most importantly, thanks Mitch for trusting us to bring your vision to life. We couldn’t be prouder of how this one turned out… and we’re already looking forward to the next one. 😉

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

Never thought we’d be doing restos on cars built after 2000... but here we are. 👀After living a pretty hard life, this u...
05/08/2026

Never thought we’d be doing restos on cars built after 2000... but here we are. 👀

After living a pretty hard life, this ute came to us with a long list of mechanical and cosmetic issues. The goal was simple – build a clean, reliable cruiser that looks as good as it drives.

Here’s what went into the transformation:

• Hidden rear drop-in airbags by Air Ride Suspension Supplies
• Upgraded compressor with sedan airbag switch
• Guards rolled
• Front XYZ coilovers
• Cracked strut towers repaired and reinforced
• Full respray by Matt at Top Gloss Refinishing in the factory colour with added metallic, plus interior components colour-coded to match the exterior
• Brand new 6.0L L77 crate engine with reluctor wheel conversion
• CNC-ported heads
• VCM Performance full cam package and OTR
• Finlay Fabrication catch can setup
• Built 4L60, 3200rpm high-stall converter and oversized transmission cooler
• Supplied and fitted 3.46 M80 L*D differential
• Brand new genuine GM big Brembo brake package front and rear, finished in red with black HSV logos
• Full MTX Audio Australia sound system throughout
• Precision wheel alignment

The end result is a tough little ute that’s just as comfortable cruising as it is putting a smile on your face every time you drive it.

A massive thank you to the owner for trusting us with the build. It’s been an absolute pleasure bringing this one back to life. 🔥

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

WHY SO SERIOUS? 😈A bit of a Joker theme going on with this mafia-inspired staff car! We actually wrapped this one up lat...
05/08/2026

WHY SO SERIOUS? 😈

A bit of a Joker theme going on with this mafia-inspired staff car! We actually wrapped this one up late last year for the legends over at basscoasttyreandautomotive.

We supplied and fitted:
• Front & rear airbags by Air Ride Suspension Supplies
• Twin VIAIR | 12V and 24V Air Compressors 444C chrome compressors
• Suspension e-Level+ air management system
• 5-gallon tank with our TIG-welded compressor brackets, colour matched to the silver
• Custom hardlines, colour matched to the purple accents

To finish it all off, we handled the full Victorian engineering certification, meaning it’s another bagged build that’s 100% legal on our roads. 😉

Built to be driven. Built to stand out.

📲 Pro Image Automotive
☎️ 0420406918
📧 [email protected]
💻 www.proimageauto.com.au
💰 FINANCE AVAILABLE
📍 Pakenham, Victoria 3810

Address

Pakenham, VIC
3810

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Pro Image Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category