R31Life

Call Directions Website Contact the business

R31Life A 1987 Nissan Skyline GTS-X (HR31), trying to score fast times in the Victorian Hillclimb Championship. 2026 3rd place in C6 Improved Production.

Here’s 2 1987 HR31s with the same paint code in the VIN plate. But they're not actually the same colour 🤔 so which one i...
11/10/2026

Here’s 2 1987 HR31s with the same paint code in the VIN plate. But they're not actually the same colour 🤔 so which one isn't the OEM correct colour? Ryan Rota and ɴɪꜱꜱᴀɴ ꜱᴋʏʟɪɴᴇ ɢᴛꜱ-x at Highball Cars And Coffee

09/10/2026

When a 4 door sedan and 2 door coupe meet...

Nissan Skyline R31

New OEM fan for RB20DET / RB26DETT, mounted on the RB20DET clutch assembly. This has given an extra 10mm clearance to th...
06/10/2026

New OEM fan for RB20DET / RB26DETT, mounted on the RB20DET clutch assembly. This has given an extra 10mm clearance to the radiator.

New fan with clutch assembly fitted

New fan with clutch assembly fitted

RB25DET R33 fan and clutch

Side by side comparison of RB25DET R33 and RB20DET HR31

Installed

Yesterday I entered the workshop of my closest competitor 😮 Steve and I fight for tenths of seconds in the Victorian Hil...
04/10/2026

Yesterday I entered the workshop of my closest competitor 😮 Steve and I fight for tenths of seconds in the Victorian Hillclimb Championship, but we have friendly competition and respect. His R33 is a weapon.

He offered the hoist in his workshop and we could do a general underbody inspection after my issue with the fan hitting the radiator. It seems to be a few factors: the RHS lower radiator mount had about 5mm movement, the gearbox crossmember has elongated holes for easy fitment, but seems to have allowed movement forward. And the fan is probably flexing (its old, from an R33 RB25, and they have an offset that sits furtherforward than the RB20).

Remedies: fitted bigger grommet holding the lower radiator mount, ordered new OEM RB20 fan, and I need to get the elongated holes filled 🤔 Will probably bring a spare radiator to Hillclimbs out of paranoia 😵‍💫

80s styling
26/09/2026

80s styling

20/09/2026

The fan hit the radiator again. Why? How can it move far enough to hit the radiator? What do I need to check to ensure this doesn't happen again?

Here’s an appreciation for the 【公式】WORK WHEELS Meister CR-01. These were my goal for a few years before I had the funds ...
18/09/2026

Here’s an appreciation for the 【公式】WORK WHEELS Meister CR-01. These were my goal for a few years before I had the funds to buy them.

When I get close to the time of purchase, deciding on the offset took time. My good old mates Dan Robson and jrodshabadoo helped 😀

Then I found the the 4 stud didn't come with 'big brake clearance' to make sure they cleared the Sumitomo 4pots. So I decided to convert the car to 5 stud. The rear hubs of HR31, Z31, S12 and F31 are interchangeable and I got a pair from a Z31. The fronts were made by Angry Industries

I've been meaning to get to this location for a while. The lighting wasn't optimal so there will be another visit. Inspi...
15/09/2026

I've been meaning to get to this location for a while. The lighting wasn't optimal so there will be another visit. Inspired by FiftySix Mga
📷 𝘔𝘦𝘭𝘣𝘰𝘶𝘳𝘯𝘦 𝘱𝘩𝘰𝘵𝘰𝘨𝘳𝘢𝘱𝘩𝘦𝘳

14/09/2026

First run of the day - 68.33 - at the final round of the Victorian Hillclimb Championship at Bryant Park. This was also my only run because I had a "cooling failure". This time of 68.33 held 2nd place in class C6 until the 4th run when Steve Baird went under 68 seconds. I landed 3rd in C6 on the day and in the Championship.

13/09/2026

Final rounof the Victorian Hillclimb Championship at Bryant Park

Address

Lower Plenty, VIC

Telephone

+61419006252

Website

Alerts

Be the first to know and let us send you an email when R31Life posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to R31Life:

Shortcuts

Share

Category