Torque n Tune

Call Directions Website

Torque n Tune Vehicle customisation/Service/repair. We specialize in Ls Commodores, and Ba-FGX falcons and common rail Diesel remapping. Hp Tuners, Sct, Pcmtec and Kess

We tune with multiple software packages.

04/11/2026

Tidying up some tuning on Jordan’s Vz,,, 735hp @ 10psi boost on E85,,,, not bad for a stock bottom end Ls1,,, its doing it easy.
Inlet air temps were only 40deg so good intercooler set up. This combo is running a fairly decent camshaft and a set of Higgins heads. His plan is to put a turbo 400 behind it. It will Be a pretty quick car with that set up.





Ve commodore in for a cam package.It is not uncommon to need new cam bearings for these engines as they have a hefty cam...
30/10/2026

Ve commodore in for a cam package.

It is not uncommon to need new cam bearings for these engines as they have a hefty camshaft that weighs a fair bit. This along with stretched oil intervals don’t help with cam bearing wear.
All this is done in house.

D-max in for remapping. This vehicle is completely stock,,,, awesome numbers. 30kw and 170nms of extra power/torque in t...
29/10/2026

D-max in for remapping. This vehicle is completely stock,,,, awesome numbers.
30kw and 170nms of extra power/torque in the sweet spot where u need it. Different vehicle to drive now.

Fitting a new crate engine to a Ve Ute. Another story of a vehicle purchased and had an engine rebuilt 20,000kms ago. Ve...
29/10/2026

Fitting a new crate engine to a Ve Ute.

Another story of a vehicle purchased and had an engine rebuilt 20,000kms ago. Vehicle was presented with next to no oil pressure when hot -oil light was flashing on at idle.

The engine was running 10w60

After looking at options - the customer decided to put a new engine in the vehicle.

In this process we installed a cam package along with the other supporting mods.

This engine had lifters fitted 3 months ago how did they go.This is a daily job - the amount of poorly repaired engines ...
28/10/2026

This engine had lifters fitted 3 months ago how did they go.
This is a daily job - the amount of poorly repaired engines we see you seriously wouldn’t believe.

I get it cost’s a lot to do engine mods but the real disappointing part is the amount of workshops that just throw half the parts at the engine.

This engine will need a crank regrind or replaced, all bearing are damaged, camshaft is damaged, oil pump is damaged. Check out the amount of lifter debris in the oil pick up.

3D Printing some ignition lead holdersStill have a lot of learning to do with the printer but it certainly has helped us...
27/10/2026

3D Printing some ignition lead holders

Still have a lot of learning to do with the printer but it certainly has helped us out.
We were servicing a Mazda 2 with a broken bonnet rod holder clip - told the customer i made one - he couldn’t believe it. I took him out the back and showed him the printer set up and he was absolutely amazed.
The best part is I can control this remotely so when you have a brain wave at home I can program the print - hit the button and it is waiting for me in the morning.

Getting this Kinga sorted.Extremely poor set up. Not running massive boost but 52 deg of timing at wide open throttle pr...
27/10/2026

Getting this Kinga sorted.
Extremely poor set up. Not running massive boost but 52 deg of timing at wide open throttle probably wouldn’t be a long term option for the motor. 10-1 afr at light throttle on the primary also isn’t a winning combo.
After a new plugs/leads,jetting,timing the engine now operates correctly and hopefully it won’t need to visit the fuel bowser as often.

Liam’s Mu-x in for some Tuning. Picking up nearly 30kws and 190nm’s of torque. Thank you for your family’s continued sup...
27/10/2026

Liam’s Mu-x in for some Tuning.
Picking up nearly 30kws and 190nm’s of torque.
Thank you for your family’s continued support. Car number 5 from you guys - its always a pleasure.

A MU-X in for some tuning. Great gains. 4JJ’S  are an awesome platform. Super reliable engines.
16/01/2026

A MU-X in for some tuning. Great gains. 4JJ’S are an awesome platform. Super reliable engines.




Bt-50 in for some remapping. These are a rock solid engine and good gains.
22/07/2025

Bt-50 in for some remapping. These are a rock solid engine and good gains.

Address

72 Caloundra Road
Caloundra, QLD
4551

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61754996488

Alerts

Be the first to know and let us send you an email when Torque n Tune posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services