W3IRD Performance

04/01/2025

2020 Road Glide Special Layframe

CNC Ported 117

SOLD

01/16/2025

PRE ORDER KITS HAVE SHIPPED!

Now available!!

2017-2023 M8 Coil Relocation Kits for H-D Touring PRE-ORDER - THESE KITS WILL BE AVAILABLE FOR SHIPPING BEGINNING OF JANUARY 2025! This plug-n-play kit was designed to move the coil on a 2017-2023 H-D Touring M8 from under the battery area on the firewall to hang on the left side of the motor like a...

12/23/2024

Custom Solid Mount Tour Pak Rack

11/25/2024

This one’s for all the bros and babes running Softail Gauge setups on their T-Bars!

Gauge Block Offs for 2014-2023 H-D Touring Fuel and Volt gauges!

These block offs allow you to delete the two small gauges (fuel/volt) on 2014-2023 Harley-Davidson Road Glides and Street Glides. The kit uses the factory hardware so that no modifications are required. This is popular when using a H-D Low Rider style gauge that goes in the handlebar clamp or changi...

09/20/2024

https://www.w3irdperformance.com/products/2009-current-sealed-saddlebag-stock-rail-mount-kit

2009-Current Sealed Saddlebag Drop Rail Mount Kit This kit was designed to make mounting sealed audio saddlebags on 2009-Current H-D Touring Motorcycles much easier. From the factory to remove the saddlebags you open the lid and access the k***s to remove the saddlebag. On sealed audio bags often ti...

08/29/2024

DelRio Custom Baggerz showing off how the new fender mounts allow you to access everything under your fender without fully removing it.

07/29/2024

Valet Skittles

06/27/2024

2009-Current EZ Remove Rear Fender Kit

This kit was designed to allow easy removal of 2009 - Current H-D Touring rear fenders.

From the factory the fender is sandwiched between a threaded spacer and a nut that sneaks into position from the bottom. This makes the fender very difficult to remove when the wheel is on the bike. It makes it even more difficult when the bike has a drop rail kit on it that holds batteries and/or amps under the tail.

This kit allows you to install and remove the fender from the top. It also allows you to fine tune the location vertically and horizontally of aftermarket fenders so they line up perfectly with the bags. The kit includes a stainless steel plate that goes on the inside of the fiberglass fender and when you have it positioned perfectly you drill two holes and rivet the plate in the ideal location. The plate also strengthens the fender and is a much stronger mounting solution than the factory bolts.

You can even loosen the front two mount bolts, completely remove the rear two mount bolts and lift the fender up to access batteries and/or amps under the tail quickly with more room.

The kit includes:

2 Stainless Steel Fender Plates w/ weld nuts
4 frame spacer clips
4 Bolts / Washers
4 Rivets

https://www.w3irdperformance.com/products/2009-current-ez-remove-rear-fender-kit

06/04/2024

QPC Swing Arm installed on Daniel’s Road Glide ST!

06/04/2024

Another Layframe ready for the streets!
-W3D Wheel cut by Jade Affiliated
-Topshop bagger products Money Maker Kit
-Topshop Short Neck Fairing
-Topshop Fuel Tank Skins / Dash
-Trask Performance Turbo Kit / Derby Cover
-American Suspension Forks / Trees / Brake
-AF Kustoms Design & Manufacturing Short Neck
-Battistini Cowbells / Grips / Boards / Hinges
-EMD Front Fender custom cut
-Klock Werks Windshield
-Dakota Digital Gauges
-Soundstream Head Unit
-Euphoria Audio 6 Speaker
-Speed By Design LLC Lids / Grills
-W3D Layframe Swing Arm
-W3D Layframe Fail Safe
-W3D Modular Fork Caps
-Sinister Seat
-Radiantz Red / Amber Rear Brake Lights
-Custom Dynamics Front Turn Signals
-Bad Dad Chin Spoiler
-Paint by RickyHD
-Powder by Volusia Powdercoat

05/24/2024

https://www.w3irdperformance.com/products/baja-designs-lp6-road-glide-mount-kit-w-amp-rack

W3IRD Performance Baja Designs LP6 Road Glide Mount w/ Amp Rack We designed this mount kit for riders that have an aftermarket stereo setup with an amp that want the Baja Designs LP6 Lighting setup! This mount kit includes: -Amp Rack-Amp Rack Brackets-Headlight Rack-Left and Right Headlight Mounts-T...

05/09/2024

Layframes are dead.

04/18/2024

02/29/2024

Tim’s Road Glide all wrapped up for Bike Week!

This is the second year Tim has sent his Road Glide down a few weeks before Bike Week so we could make some changes and have it ready for the rally.

This time we did:
Topshop bagger products Rear End
Trask Performance Big Sexy Exhaust
Star Racing F35 Cam / Lifter Cuffs
S&S Oil Pump / Cam Plate
Dunlop Rear Tire

12/25/2023

12/09/2023

Full Air, Centerstand and a 4 speaker Euphoria setup finished on another one of Tim’s beautiful units!

11/20/2023

💥Black Friday Sale💥

A lot of the brands we carry are doing awesome Black Friday sales and it would be nearly impossible to list them all!

So we are going to make it easier for you. Email us a list of parts you are looking to get for your motorcycle and we will give you the best package deal we can!

We can get anything and everything worth putting on your bike.

📧 : [email protected]

As always, thanks for your support and Happy Thanksgiving! 🦃

10/21/2023