Fordahl Bilt

Fordahl Bilt Specializing in 67-97 ford trucks and powerstroke conversions

Always looking for ways to improve as we’ve had extremely long lead/wait times on parts, while also trying to build truc...
04/13/2026

Always looking for ways to improve as we’ve had extremely long lead/wait times on parts, while also trying to build trucks in the shop. It’s just me over here!

Moving forward we are now getting everything cut locally which will allow us to cut lead times down tremendously and keep products on the shelves.

Also limiting harness sales to a set amount a month to keep lead times to a minimum and to not get overwhelmed with them. We’ve had months with 20+ harnesses to do, which set us back.

Thanks everyone for the continued support, email is the best way to contact with any information.

7.3L Powerstroke mounts for CV IFS swapped trucks are live on the site. 100% bolt in, same mounts we’ve been running on ...
03/26/2026

7.3L Powerstroke mounts for CV IFS swapped trucks are live on the site. 100% bolt in, same mounts we’ve been running on our shop truck!

Limited stock available with no lead time on this first run, get yours today!

Full info at fordahlbilt.com

MADE IN USA

Shop Truck Saturday! This truck has been a phenomenal daily driver since finished. Kept the engine on this one looking O...
02/07/2026

Shop Truck Saturday! This truck has been a phenomenal daily driver since finished. Kept the engine on this one looking OEM+ for a simple, clean look. But it’s not stock!

- CV IFS with our 7.3L powerstroke mounts
- Mustang EPS
- 14” Cadillac Brembos
- 19x9 - 19x11 aodhan wheels

- 7.3L Powerstroke
- 238/200 injectors
- Non gated van turbo with internals
- T850 HPOP
- 165 5G
- 4 line feed and other billet goodies
- Hydra with custom tuning
- Studs/springs/pushrods
- Custom engine harness and standalone harness, 450’ of added wire to hide all electronics

- 4R100 with billet converter and controller

- seats and dash pad
- lower dash bezel with custom 4 gauge bezel and hydra flush mount
- cobalt gauges
-14” billet wheel, fresh carpet, harnesses and fully sound deadened

- full stainless 3” downpipe, 4” exhaust with 5” tip, radiator hoses and 4” intake

And much more!

Motor Mount Monday 🇺🇸Spent the morning fulfilling some orders of our popular highboy and lowboy 7.3L mounts, as well as ...
01/26/2026

Motor Mount Monday 🇺🇸

Spent the morning fulfilling some orders of our popular highboy and lowboy 7.3L mounts, as well as started burning in some Crown Vic 7.3L mounts that will be available by end of the week!

For those waiting on some of these mounts keep an eye out, they are heading your way!

Fordahlbilt.com

Merry Christmas 🎄
12/25/2025

Merry Christmas 🎄

Our 67-77 highboy 7.3L mounts got a nice little update! We’ve added two more mounting holes to work well with a battlebo...
12/16/2025

Our 67-77 highboy 7.3L mounts got a nice little update! We’ve added two more mounting holes to work well with a battleborn 05+ axle conversion or similar! No need to drill any extra holes.

They still have the same great fit and finish, and works the same on a standard highboy, with the option to use 4 or 6 bolts to mount them now.

They are finally here! 7.3L IDI and powerstroke mounts for 2WD 67-79 ford trucks, intended for those with 4x4 conversion...
12/15/2025

They are finally here! 7.3L IDI and powerstroke mounts for 2WD 67-79 ford trucks, intended for those with 4x4 conversions!

First 3 kits are discounted! Only available at:

Fordahlbilt.com

New products in the works! Keep an eye out, available 1/1 or sooner! Everything is in final fit up/testing.Also working ...
12/05/2025

New products in the works! Keep an eye out, available 1/1 or sooner! Everything is in final fit up/testing.

Also working on a system to cut down lead times to almost nothing and keep a good inventory available at all times, nobody likes to wait!

We were tired of trying to find a clean spot to mount a VHX/HDX/RTX box under the dash without drilling any extra holes ...
12/01/2025

We were tired of trying to find a clean spot to mount a VHX/HDX/RTX box under the dash without drilling any extra holes so we came up with this clean, simple solution! Mounts using the 2 dash pad studs. Quick, easy install!

Works with all Dakota Digital boxes, VHX, HDX, RTX.

Stainless button heads and nylocks included to mount box.

Available at fordahlbilt.com

Finally! A bolt in solution for mounting a coyote pedal into a 1965-1979 F100 F250 F350 truck. No drilling/welding requi...
11/26/2025

Finally! A bolt in solution for mounting a coyote pedal into a 1965-1979 F100 F250 F350 truck. No drilling/welding required, bolts right into existing throttle pedal location. Pedal is mounted at slight angle for the right feel.

We designed this mount to be installed behind carpet, with only the standoffs to be cut through the carpet for a clean look.

Works with mustang pedal shown.

Hardware included!

Available at fordahlbilt.com link in bio

Haven’t posted much on FB in a bit, we have been BUSY! Lots of cool projects and products coming out.Been working hard o...
11/26/2025

Haven’t posted much on FB in a bit, we have been BUSY! Lots of cool projects and products coming out.

Been working hard on getting all other current orders and harnesses built, for those that has been waiting, keep an eye out for an update!

To help with that, we are still looking to add someone to the team part time!

Appreciate all the continued support!

-FORDAHL BILT

Address

Los Angeles, CA

Website

Alerts

Be the first to know and let us send you an email when Fordahl Bilt posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Fordahl Bilt:

Shortcuts

Share