Advantage European Auto Parts inc

08/07/2026

No replacement for these hand-built machines! 6.0L V12, 220MPH on the dash & an interior that takes you back in time.

Ranjit brought us his beautiful 2005 Aston Martin DB9 Volante for a maintenance consultation. This is a recent pickup for him, and while he’s been enjoying it there were some underlying concerns he wanted to take care of. We started with flushing ALL fluids, as even with 25,000 miles on the dash everything was nasty. Highlight of this was a rear L*D that came back to life, eliminating some harshness that was felt when the car was first brought in. While at it we also replaced a leaking water pump. Lastly a maintenance plan was created to revisit certain components & check wear.

Thank you Ranjit for trusting us with your beautiful Aston!

07/02/2026

06/30/2026

F80 Dreaming ☁️🩶

Eddy ( Eddy Madera ) brought his F80 to us with several different concerns about driveability & overall performance of the car. We performed a complete inspection - looking over key runability items & running tests to ensure this car is performing how it looks. While performing diagnosis we found one turbocharger to be leaking oil, requiring a rebuild. We also took care of some miscellaneous cooling hoses, installed catch can, exhaust & front lip.

06/23/2026

The holy crate 😭

06/22/2026

Stay tuned as we navigate thru this engine project in the next few months!

06/19/2026

Open gate never gets old!

- Single Turbo Kit
- Behind The Keys
- Reflex+ Fueling Controltuning - Software & Flex Fuel Integration

docrace
*All content, footage, and things shown are AI-generated and not real. Artificially made for entertainment purposes only*

06/19/2026

One of our favorite builds finally getting wrapped up! 🚀

Darin’s E92 is special - with just 65,000 on the dash we took his car from zero to hero. Completing a build like this start to finish takes time, we don’t make compromises. Delivered to the customer fully dialed after working closely w/Doc. The power curve, sound, and drive-ability of this car is unlike many platforms out there.

At the core of this build we used DOC RACE® - Custom Turbo Kits bottom mount turbo kit and DocVu Tuning sauce behind the keys.
MOTIV Motorsport - PI Fueling Control
MHD Tuning - Tuning & Flashing
IQRaceworks - Index 12 Injector Cleaning
Turbosmart - Wastegate

06/16/2026

Ford Mustang Shelby GT500 Optioned Beautifully 🦅

Tarik ( Tarik ) came to us with his pristine 2022 Mustang Shelby GT500 for a quick intake install. SPE Motorsport made it easy including all the hardware necessary. +30WHP~ increase, but the biggest difference is that supercharger whine 🌬️

06/12/2026

If you’re gonna do it, do it right 🌶️

Brady ( Brady ) brought his 335i to us early this year after purchasing it. He’s spent the last couple months working with us closely to get the car single turbo ready. We took care of many maintenance items to ensure this car was in a good spot prior to the go fast parts. Especially on the N54 platform, people put off key maintenance items just to go fast. Often times this results in jumping to a single turbo/twin setup without planning the parts out, dealing with constant heat/electrical issues & ultimately a setup you are unhappy with. It may work, but for how long?

With our years of expertise & knowledge on this platform we dialed the setup in for his goals. We are the best in the game when it comes to this platform, planning the build with efficiency, heat management & drivability in mind. End result is a car that offers a great power-band with room to grow as more fueling gets added. Hard parts were strategically installed with serviceability in mind. This is an A/T car, but we know how keep them living at this power level 😉

Speedtech Performance - Single Turbo Kit, Pulsar 64/66 BB
Precision Raceworks - Stage 2.5 LPFP
VRSF - 7.5” Competition FMIC
TiAL Sport - Wastegate
MHD Tuning Wedge/// Performance Racing - Tuning
xAutomotive - Transmission Tune

06/02/2026

Carbon…. Yes or No?

Tyler’s ( ) M3 came back to us for an absolutely stunning kit put together by . This included a beautiful CSL style plenum, all hoses, clips & necessary sensors. This kit is only part of the process! Next to take advantage of all that extra flow, we worked with for a file that utilizes Alpha-N IAT sensor and deletes the stock MAF.

The result is a much smoother power delivery, while also offering a 30WHP~ & 30WTQ~ bump at minimum. Car is street tuned so no current figures. But this resolved many drive-ability hiccups & inconsistencies that you just can’t get around on a stock setup.