XIT Offroad

05/29/2026

This Bounty Course race car came to us lacking serious power. The customer complained it felt sluggish on full-throttle pulls and just didn’t have the acceleration needed to stay competitive.

Even with a Bikeman Big Mo water-cooled turbo, BMP exhaust, factory injector tune, and silicone charge tubes, the machine still wasn’t performing the way it should.
So we stepped in and transformed it!

We started with BC Stage 2+ cams to let this engine finally breathe, then backed it up with:
✔️ Aluminum intake & catch can
✔️ Aluminum charge tube
✔️ Turbosmart BOV
✔️ High-pressure fuel pump
✔️ Big injectors
✔️ Custom AA tune on VP X85 fuel

The result? An absolute animal!

This full-time locked 4WD machine with a torque locker now has enough power to break loose and drift through turns with just a slight touch of the throttle. What once felt lazy now pulls HARD and delivers the kind of performance a race machine should have from the factory.

This customer competes with this setup, and after this transformation, podium finishes are absolutely within reach.

At XIT Offroad, we don’t just bolt on parts — we build powerful, reliable Polaris platforms that perform when it matters most. If you want real horsepower and proven results, we know exactly how to make it happen.

We want to personally thank the Hamiltons for trusting us and our recommendations to transform this machine to its full potential. We look forward to many more years of seeing this machine in action and the racing it competes in. 🏎️💨🏎️💨🏎️💨

Get out there and go get them Jeter!

05/22/2026

Another low mileage (260 miles) PRO R in for a set of MTS Offroad dual rate springs to fix the sagging stock springs. It’s a well known problem and we are here to fix it! Give us a shout, we can easily advise if yours is in need.

05/22/2026

It's Memorial Day weekend, where is everyone riding?

05/19/2026

We get asked all the time, "whats the best upgrade I can do to my machine?" Our answer is always shock work, Its not a sales pitch, we live by it, Shock work will completely transform your machine.
Shocks wear out, they are a wear item, they have oil, seals, nitrogen and springs all of which must be maintained for the most comfortable ride, performance and compliance. Most dont realize that their shocks are even bad until they start leaking oil or fail completely, at this stage your shocks were worn out a 1000 miles ago, the degredation in ride quality happens so slow that you dont realize its even happening until they have been serviced, then the transformation becomes clear. your ride no longer feels spongy, the front end stops nose diving under braking the rear stops squating under acceleration and the machine is far more predictable.
We offer several services.

Shock rebuilds: Our rebuild consist of tearing down the shocks, inspecting them, cleaning them through a multistage process of a chemical bath plus a trip through the v***r hone, we replace all seals, o rings, wear bands, oil and a proper nitrogen charge. this service cost between $140-$250 per shock. this is a great value if you're just needing/wanting to service your shocks.

Dual Rate spring with nitrogen caps: We offer several options of Dual Rate Spring kits, MTS, Hyperco, Eibach, Zbroz, SDI and more. a dual rate spring is a huge upgrade over factory springs with much more adjustability and customization. we recomend nitrogen caps at every level because its an easy way to service and determin the health of your shocks.

Full Build, this is the holy grail! Full build will include custom valving and springs we can tailor this to exactly your riding style, what make us different is that we include rebuilds with every custom valving job we do, this is a $560+ value, we do this because we want your fully valved shocks to perform at their peak.

We also offer brand new shocks from several manufactures including:
FOX, Walker Evans, Elka, King, Bilstein, Exit, Rough country and more, We can even build custom shocks.

We have built a reputation as a premier shock builder throughout the country, We are also the #1 MTS valving dealer in the country, something we are very proud of, not only because its a badge of honor for us it tells us that what we are doing matters, It matters to us that our customers trust us to do this type of work on their very expensive machines. It takes a lot of trust for someone to package up their very expensive shocks and ship them across the country. We are very proud that we have built this trustworthiness within this community and we will always value that trust and build on it.

Aaron Godwin, Owner
XIT OFFROAD LLC

Call now to connect with business.

05/19/2026

How do you get a bed full of new sand tires for a PRO R?

Answer: Get drug by a 4 seat Turbo S at the drag strip 😂

Gets pretty expensive real quick 😉

All in good fun 😂

05/18/2026

Want to thank Seth for brining his long traveled Polaris Xpedition ADV down from Oklahoma to get a set of MTS Offroad dual rate springs installed. This rig is ready to hit the rocks. Paired with a custom cut helix to help turn the 35” Roxxzillas. This things is looking killer and is for sure to be a head turner out on the trails.

Tell us what you think? Would you trade in your sport machine to hop in one of these for comfort? We know a lot of people who make the switch and say they wouldn’t go back 🤔

05/14/2026

Wheel & Tire Combo Deals!

Upgrade Your Ride at XIT Offroad
Take 15% OFF Wheel & Tire Combos
FREE Mounting + FREE Lug Nuts Included
📞 Call today for your custom setup!
817-479-6487

Price is for pickup only at XIT Offroad in North Richland Hills, TX.

05/14/2026

Lets get these Memorial Day sales started!

Huge saving on springs and valving now through 5/25!

Pricing below includes us installing the springs on the shocks brought to us off the car. (Minor modifications may need to be made afterwards)

Also adding additional savings on upgrades and shock accessories when paired with Springs or Springs & Valving.

Give us a call or PM us to get scheduled!

Discounted shipping rates available if you aren't able to make it to our shop located in North Richland Hills, TX

05/13/2026

Want to thank Wade for making the trip up from Corpus Christi to transform his X3 with a complete shock makeover!

Full Build Includes:
- Inspected
- Steam Cleaned/ V***r Honed
- New Wear Band & O Rings
- New Oil & Nitrogen Recharge
- MTS Schrader Valve Caps
- MTS Springs
- MTS Valving