12/11/2026
There is never really a typical day at Radikal. We start the week with PPF on a BMW, the next day a Porsche, then after that, a G-Waggon or perhaps a superbike.
Different vehicles, different challenges, and plenty of variety in between.
I absolutely enjoy every second in this place.
We spend just as much time thinking about what happens inside a car as we do on the outside.
Touch screens, gloss piano black, carbon fibre trims, and all the surfaces you interact with every time you drive? we protect that too. 💎
A little behind-the-scenes action on the BMW M5 G90. In theory, PPF is a different game altogether: tight spaces, awkward angles, delicate surfaces, and very little room for error. It's the sort of work that demands patience, experience, and a steady pair of hands, and it's exactly the kind of challenge we enjoy taking on.
Ceramic coating a wheel, for us, means the wheel of the vehicle. Getting it properly clean and prepared beforehand is where I spend most of the time. There is no point protecting contamination underneath a high-temperature coating, and yes, we do the barrels as well.
And while we're talking about preparation, brake callipers deserve some attention too. A proper clean with the right products before coating isn't the most glamorous part of the job, but it's one that never skip.
The Yamaha R1M, not exactly your average motorbike. Between the aggressive fairings, intricate shapes, and tight working areas, protecting a bike like this brings a completely different set of challenges.
We're always excited to see an Italian or high-powered Japanese bike coming through the doors.
Anyone can install paint protection film. Anyone can apply this sticker, but working the film across the bonnet and complex areas, especially on this Audi RSQ8, requires more than a few years' experience.
Controlling the tension, pushing out the installation solution, and making sure everything settles exactly where it should with minimum to no adhesive lines.
It might look straightforward in a photograph, but there is a lot happening through your hands that you learn from the years of working with these