PR Technology

PR Technology PR Technology is a Porsche specialist workshop based in Brookvale. PR Technology is highly regarded for its exceptional workmanship and attention to detail.

PR Technology was established in 1993 by current Partners Paul Jacobsohn & Richard den Brinker and has grown to be recognised as one of the largest and most respected Porsche workshops in Australia. Richard and Paul, with backgrounds in mechanical and electrical engineering, together lead an elite team with an immense wealth of knowledge and experience. The PR technology team includes Porsche trai

ned motorsport technicians, engineers, machinists and fabricators hand picked from Australia, Europe and the USA. As a group of enthusiasts passionate about their work, PR Technology deliver an exclusive specialist service, with a systematic approach to problem solving, attention to detail and quality workmanship unparalleled in the automotive trade. The PR Technology team have exceptional experience and knowledge in everything Porsche. As an authorised workshop they offer warranty compliant servicing on new model Porsches; and can carry out servicing, upgrades and specialist race preparation for all Porsche models. In addition, their customised attention can create your dream car, accurately restore a classic, or prepare you for a race meeting. At their large, immaculate facility you are encouraged to be involved with all work on your Porsche. PR Technology is equipped with Porsche diagnostic equipment, computer design capability, machining facilities, a fabrication & welding department, wheel alignment equipment, electrical and electronic laboratory and a service department. In addition to PR Technology’s roadside expertise, PR Tech Racing is very proud of its achievements. They have built several Australian Championship winning Porsche race cars; and this year are set to be the 2009 Australian GT Championship overall winner with the PR Tech Racing 997 GT3 Cup S in the hands of David Wall. Richard den Brinker: Richard has been involved with many leading Porsche racing teams in Australia. He specialises in Porsche race car preparation, fabrication and engineering; including CAD design, TIG welding and component machining. Richard’s personal motorsport exploits have garnished much success, mainly on tarmac and navigation rallies. Richard was national co-driver champion at the 2007 Dutton Rally, finished 9th outright and Class Winner at the 3800km 2009 Australasian Safari and has competed at the Mt Buller sprints and the Classic Adelaide. When not adding to his prized trophy collection, Richard’s other interests include his unique off-road vehicles (Pinzgauer 6x6 and Haflinger 4x4), riding his vintage 1954 Puch motor scooter, snowboarding, mountain biking, rock climbing, boating and taking his family away camping. Paul Jacobsohn: Paul has a background in electrical engineering, and is our in-house electrical systems and component repair guru.

31/03/2026

Porsche ownership doesn’t stop at the drive — it continues in the workshop.
Behind every measured steering input and precise throttle response is the work of technicians who understand the engineering through experience. At PR Technology, diagnostics go beyond fault codes — data is interpreted, wear is caught, and each car is maintained as it was engineered to perform.
From software calibration to mechanical tolerances, every detail is handled with intent. Because performance isn’t just built in Stuttgart — it’s preserved in Brookvale.

Now Hiring: Experienced Fabricator/Welder- We have an exciting opportunity for a highly skilled fabricator to join our t...
20/03/2026

Now Hiring: Experienced Fabricator/Welder
- We have an exciting opportunity for a highly skilled fabricator to join our team and work in our modern facility, assisting in the production of complex race components. Your attention to detail will allow you to thrive in an environment that demands excellence. Onsite training provided to hone your skills and learn new skills on a variety of specialist machinery. The company offers great benefits including a 4 day working week and flexibility with schedule, and possibility of overtime.
PR Technology is a pioneering independent Porsche workshop. Our team developed WTAC multiple winning RP968, Cup cars, GT cars, Porsches, and other high-performance vehicles. PR Tech Racing is responsible for the design, manufacturing, and maintenance of many race cars. Our facility is based in Brookvale on Sydney’s Northern Beaches.
Key Responsibilities:
- Working with various materials, including aluminium, titanium, stainless steel, chromoly, and mild steel.
- Fabricating and maintaining race chassis, suspension, and cooling system components.
- Meeting strict production deadlines while maintaining high standards of workmanship.
Skills & Attributes:
- Machining skills highly valued, but not a necessity
- Strong self-motivation and discipline
- A commitment to continuous improvement and precision engineering.
- Ability to work independently and professionally with minimal supervision.
- A ‘can-do’ attitude and ability to work as part of a team.
This is a technically demanding role, and flexibility with working hours may be required to meet production deadlines.
If you have the right skills and experience, apply now by telling us about yourself, your interests, and why you want the job in fewer than 300 words, and prepare some photos of your works.
Email us here: mailto:[email protected]

Driver Training Day – 15 May 2026One Raceway - Book Now!Join us for a full day of driving in an open pit lane format, gi...
13/03/2026

Driver Training Day – 15 May 2026
One Raceway - Book Now!

Join us for a full day of driving in an open pit lane format, giving you the freedom to go out on track when you’re ready and build confidence at your own pace.

With limited entries, you’ll have plenty of track time, space on circuit, and the opportunity to work with instructors.

Perfect for newcomers wanting to learn the circuit ahead of Porsche Club Super Sprint #4 the following day.

Drivers briefing at 8:30am, track running until 5pm.
Lunch provided.

A Motorsport Australia licence is required (day licences available).

More details and bookings via the website.
https://www.prtechnology.com.au/collections/shop/products/driver-training-day-15th-may-2026

Six Months On.
Built in our engine room with full in-house machining, assembly, testing, installation and dyno tuning.Ev...
03/03/2026

Six Months On.

Built in our engine room with full in-house machining, assembly, testing, installation and dyno tuning.

Every engine is assembled, measured and tested under one roof.

#911

29/01/2026

PR Technology delivers specialist servicing, performance upgrades and motorsport know-how, backed by decades of experience and a passion for doing things properly. From road cars to race cars, every Porsche is treated with the care it deserves. #911

24/11/2025

Richard den Brinker is mic’d up at our PCNSW open evening, answering questions as this 2005 996 RSR sings on the dyno during a sound demonstration. First raced by David and Des Wall in GT and Prod Sports — including a podium at the Malaysian 12-Hour with Barton Mawer — it later became a long-term campaigner for Richard Perini.

This example has moved well beyond its original 3.6-litre spec. It now runs a 4.0-litre 997 RSR engine producing around 550hp, with Bosch ABS, traction and launch control, a paddle-shifted sequential (currently being revised), and a 997 dash to round out the package. Perini has driven it in hundreds of events, taking multiple Porsche Club NSW super sprint titles and a CAMS class win along the way.
-
#911 #996

Check out this tough ‘Corse’-built Porsche 964. It was in last week for Tarmac Rally prep — RallySafe install, extinguis...
24/11/2025

Check out this tough ‘Corse’-built Porsche 964. It was in last week for Tarmac Rally prep — RallySafe install, extinguisher fitment, and a full check-over to ensure it’s safe and ready to go.

-
#964

17/10/2025

Join Richard den Brinker at PR Technology as he talks Porsche Club NSW members through the highly specialised, FIA-compliant Porsche 910 engine build. Learn about the engineering detail behind this remarkable project — and hear the engine start and run.

PCNSW Club Night at PR Technology – TURBO EditionLast week, we had the pleasure of hosting the Porsche Club NSW October ...
15/10/2025

PCNSW Club Night at PR Technology – TURBO Edition
Last week, we had the pleasure of hosting the Porsche Club NSW October Club Night here at PR Technology, and what a night it was! The theme for the evening was TURBO, and our garage doors were wide open for members to explore the inner workings of a specialist Porsche workshop.
Special mention to Volkswurst, who kept everyone fuelled with their authentic German sausages
It was fantastic to see so many members turn up and engage with the workshop environment, ask questions, and just enjoy being around the amazing cars. Nights like this remind us why the Porsche community is so passionate and connected.
-

🚨 LAST CHANCE TO BOOK! 🚨Get on track with PR TECH Driver Training at One Raceway on 24th October 2025.Run the circuit in...
09/10/2025

🚨 LAST CHANCE TO BOOK! 🚨

Get on track with PR TECH Driver Training at One Raceway on 24th October 2025.

Run the circuit in REVERSE – Shelley Direction with instructor Barton Mawer and perfect your pace before the Porsche Club Supersprint #6 the next day.

✅ Open pit lane – go out when you’re ready
✅ Limited entries – lots of track time with your instructor
✅ Perfect for newcomers and experienced drivers
✅ All cars welcome!

Arrive by 8:15am for briefing, track walk at 9:00am, and on-track from 9:30am–5pm
Catered lunch included (guests catered with notice)
Motorsport Australia day licence available on-site

Don’t miss this chance to familiarise yourself with a brand new track in your own time!

BOOK NOW: https://www.prtechnology.com.au/collections/shop/products/track-day-24th-october-2025
Info: 02 9905 6316

Fabrication work underway on this Porsche 356 in our Brookvale facility.From machining to welding, design to diagnostics...
02/10/2025

Fabrication work underway on this Porsche 356 in our Brookvale facility.
From machining to welding, design to diagnostics, everything is handled in-house at PR Technology. Our workshop is set up so owners can be part of the process, seeing the detail that goes into every stage of their car’s journey.

#911

Address

Unit 13/9 Powells Road Brookvale
Brookvale, NSW
2100

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61299056316

Alerts

Be the first to know and let us send you an email when PR Technology posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to PR Technology:

Share