ASF - Architectural System Fabricators

ASF - Architectural System Fabricators Standard and custom metal trim fabrication and CNC services: sheet metal, phenolic, ACM, acrylic and much more.

Another happy customer another successful project
05/18/2026

Another happy customer another successful project

Custom bent inside and outside one pc corners With final result
05/12/2026

Custom bent inside and outside one pc corners
With final result

🔥 Precision You Can Trust — Custom 3/8" Aluminum Base Plates by ASF 🔥At ASF, we don’t just cut metal — we engineer solut...
03/27/2026

🔥 Precision You Can Trust — Custom 3/8" Aluminum Base Plates by ASF 🔥
At ASF, we don’t just cut metal — we engineer solutions. Our Bodor laser has been hard at work producing customized 3/8" aluminum base plates, built to meet exact project specifications with unmatched accuracy.

✨ Why our laser‑cut base plates stand out:
Ultra‑clean edges and tight tolerances
Consistent, repeatable precision across every piece
Fast turnaround without sacrificing craftsmanship
Fully customizable shapes, hole patterns, and dimensions

✨ Custom .080 Aluminum Z — Precision‑Built for Our ClientAnother custom fabrication wrapped up at ASF – Architectural Sy...
03/20/2026

✨ Custom .080 Aluminum Z — Precision‑Built for Our Client

Another custom fabrication wrapped up at ASF – Architectural System Fabricators.
Our team produced a fully customized .080 aluminum Z, cut and formed to exact project specifications.

Tight tolerances. Clean edges. Perfect consistency.
When a client needs specialty components that aren’t available off the shelf, ASF delivers the solution — built right, built fast, and built to last.

Proud of the crew for keeping the craftsmanship high and the turnaround tight.

🔷 33‑Foot Insulated Custom Corner — Built In‑House by ASFAnother big win for the ASF crew. This week our team fabricated...
03/13/2026

🔷 33‑Foot Insulated Custom Corner — Built In‑House by ASF

Another big win for the ASF crew. This week our team fabricated a 33‑foot long insulated metal panel custom corner for one of our clients — a piece that demanded serious coordination, accuracy, and experience.

Long runs like this are all about:
Perfect alignment over the full length
Tight, consistent insulation
Clean bends and flawless finish
Zero tolerance for error

Our shop handled it start to finish, proving once again that when the project calls for precision and custom fabrication, ASF delivers.

✨ Custom .040 Aluminum Trims — Another ASF Build Done RightAnother custom order wrapped up at ASF, this time crafting .0...
03/06/2026

✨ Custom .040 Aluminum Trims — Another ASF Build Done Right
Another custom order wrapped up at ASF, this time crafting .040 aluminum trims tailored exactly to our client’s specs.

Clean bends, tight tolerances, and flawless consistency — the kind of detail our team delivers day in and day out. When the project calls for custom fabrication, ASF is the shop that makes it happen.

Proud of the crew for keeping quality at the center of everything we do.

Custom Centria Foam Panels — Built In‑House by ASFAnother custom project wrapped up by the ASF crew — this time Centria ...
02/27/2026

Custom Centria Foam Panels — Built In‑House by ASF
Another custom project wrapped up by the ASF crew — this time Centria foam panels, fully fabricated in‑house for one of our clients.

These panels are extremely time‑consuming, detail‑heavy, and demand absolute precision from start to finish. But that’s exactly where our team shines. From layout to cutting to final assembly, every step was handled with the level of craftsmanship and focus that ASF is known for.

Proud of the crew for knocking out another complex custom order and delivering the quality our clients count on.

ASF Social Media Post — Custom .050 Aluminum Louver BladesAnother custom order wrapped up at ASF.This time: precision‑cu...
02/20/2026

ASF Social Media Post — Custom .050 Aluminum Louver Blades

Another custom order wrapped up at ASF.
This time: precision‑cut .050 aluminum louver blades, built exactly to our customer’s specs and finished with the clean, consistent quality our shop is known for.

From raw sheet to final profile, every blade is cut, formed, and inspected in‑house — no guesswork, no delays, no compromises. When a project calls for accuracy and repeatability, our team delivers every single time.

A closer look at our previous laser‑cut job 0.08 aluminum for 1/2" Z profiles.At ASF, precision isn’t a feature — it’s t...
02/13/2026

A closer look at our previous laser‑cut job 0.08 aluminum for 1/2" Z profiles.

At ASF, precision isn’t a feature — it’s the standard.
This batch was custom‑programmed, laser‑cut, and processed in‑house to meet exact architectural requirements.

These Zs were headed out the door and straight to one of our clients who relies on ASF for accuracy, consistency, and fast lead times.

Custom fabrication. Architectural precision.
ASF delivers every time.

01/30/2026

✨ Custom 0.08 Aluminum Z’s — Precision Laser‑Cut
Another custom order wrapped up at ASF – Architectural System Fabricators.
Our team just finished producing 0.08 aluminum for 1/2" Z’s, fully customized and laser‑cut to exact specifications.

Clean cuts. Perfect consistency. Zero guesswork.
When clients need specialty components that no one else can turn around, ASF delivers every time.

Proud of the crew for keeping the quality high and the craftsmanship unmatched.

Custom fabrication. Precision laser cutting. ASF gets it done.

Address

Southington, CT
06489

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 4pm

Website

Alerts

Be the first to know and let us send you an email when ASF - Architectural System Fabricators posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ASF - Architectural System Fabricators:

Shortcuts

Share