Triple Seven.

Directions Website

Triple Seven. Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Triple Seven., Cars, 113 Midway Drive, Sebring, FL.

09/25/2026

How we mount a diffuser for the first time

09/24/2026

Quick release and chassis mounted. New diffusers are live on the link in the bio. Made for any car

09/23/2026

First diffuser going out to a 991 GT3RS, can’t wait to see it mounted on the car VLD

09/21/2026

Finally a solution to rear diffusers, mess around with it on the link in our bio ⬆️

If you own a tape measure, you can design a diffuser.Today we launch the 🆕Diffuser Configurator. A free web tool that tu...
09/18/2026

If you own a tape measure, you can design a diffuser.

Today we launch the 🆕Diffuser Configurator. A free web tool that turns a handful of measurements off your car into a real, manufacturable rear diffuser, built and shipped to your door.

→ Fits any car. With or without bumper cut.
→ Measure it with a tape measure. No scanner, no template.
→ Infinite configurations, guided setup. Change a number, see it update in 3D.
→ Know the weight before you order. Real numbers, not estimates.
→ Free to use. Download your 2D and 3D files whether you buy or not.
→ Fast turnaround, shipped straight to your door.
→ Ships internationally.

Build yours free at diffuserconfig.777performance.com (link in bio)

Measured in 30 minutes. This E36 runs a relocated exhaust, so the shape was built around it. Race spec: the front section bolts to the bottom of the differential and follows the floor line all the way back to the rear bumper.

Adjustable curve profiles. Start flat, then ramp. Bow it out around a bumper. The diffuser bends around obstacles a straight ramp would run right into.

Full configurator on mobile and desktop, plus printable 2D schematics so you can check your dimensions against the actual car before you commit.

The configurator watches your ramp angle, ride height and exit area as you build. Go too aggressive and it tells you. Go too shallow and it tells you that too. You end up inside the window where a diffuser actually does something.

Carbon uprights, quick release hardware, same setup we use on our chassis mounted splitter. Coming as a standalone kit soon. Cut them to length with simple tools, no fab shop.

Final Call: Sunday at 11:59pm EST orders for this batch of TCR Bumpers for FK8 close and will not reopen. Production wil...
09/04/2026

Final Call: Sunday at 11:59pm EST orders for this batch of TCR Bumpers for FK8 close and will not reopen. Production will then begin, if you’d like one, this is your last call.

08/24/2026

Activate the air brakes

Australia’s pretty cool, what they do with our American cars are event cooler. When the Gen 3 Australian Supercar came o...
08/14/2026

Australia’s pretty cool, what they do with our American cars are event cooler. When the Gen 3 Australian Supercar came out, we made brake ducts that allow you to fit 3” brake ducts on your Mach 1 or Mach 1 Style bumper to caliper cooling brackets. We’re running a discount on them over the course of this weekend using “ICY”.

TCR Bumper is back one more time.If you’ve been following along, you know we developed this bumper a while back and ship...
08/13/2026

TCR Bumper is back one more time.

If you’ve been following along, you know we developed this bumper a while back and shipped our first batch about two years ago. We’ve had a lot of people ask for another opportunity to get the TCR front end for themselves so we’re bringing it back for a limited run.

The TCR Front end was designed with data from the factory Honda TCR Race Car many of you are familiar with, we adapted it to carry over features you’d expect from the race car while fitting on the FK8. There is both a Carbon Fiber and Fiberglass version.

Chassis Mounted Splitter: The chassis mounted splitter we use is Quick Release, 20mm thick Nylon Foam Sandwich with 6x Carbon Mounting Points to the North American crash bar.

Fog Lights: If you option out fog lights instead of the standard block off plate, you have the choice of either yellow or clear pods. Both very bright and tap into the factory fog lights instead wiring.

Brake Ducts: The pair of 3” inlets route to ducts we designed that mount to the factory fender liner, allowing more cooling than the factory lip.

I attached the installation video here, as well as the order links.

For the first Carbon Fiber order we’ll include a free set of rear bumper vents.

For the first 3 Fiberglass we’ll include a free pair of Motorsport Door Releases.

Carbon Fiber: https://tripleseven-na.com/products/2017-2021-fk8-type-r-tcr-style-front-fascia-carbon-fiber

Fiberglass: https://tripleseven-na.com/products/2017-2021-fk8-type-r-tcr-style-front-fascia-fiberglass

Installation: https://youtu.be/p7CeATyXVQ4?si=j-oYJgr9l80kF84a

08/13/2026

E9X M3 with our GT3 and Flat Bottom wheel

Address

113 Midway Drive
Sebring, FL
33870

Website

Alerts

Be the first to know and let us send you an email when Triple Seven. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category