Enduro1

09/30/2026

09/20/2026

Pack light. Ride prepared. 🔧

The Enduro1 Compact Tool Kit covers the essentials for quick trail-side adjustments — all in one lightweight setup that fits in your pack.

✅ 6mm Allen T-handle driver
✅ 6 / 8 / 10mm sockets
✅ T45 Torx bit
✅ Flathead, PH1, PH2 and PH3 Phillips bits
✅ Enduro1 Bolt Bag included

Use the long end for general work or the short end when you need extra leverage.

Shop now: https://enduro-1.com/products/enduro1-compact-tool-kit

09/18/2026

Stop stalling in technical terrain. Smooth out the power delivery. 🔧

The Enduro1 9 oz Clutch Weight adds rotating mass to give you smoother low-RPM power and a more predictable power curve — bolt-on design for DDS-style clutches on select GasGas, KTM and Husqvarna.

✅ Stainless-steel construction
✅ Reduces stalling in technical sections
✅ Smoother low-RPM power delivery
✅ More predictable power curve
✅ Bolt-on DDS design

Check the full model and year fitment before ordering.

Shop now: https://enduro-1.com/products/enduro1-clutch-weight-9oz

09/16/2026

Smoother clutch pull. Better control. Less fatigue. 🔧

The Enduro1 Cheater Slave Cylinder is CNC machined from 6061 aluminum, hard-anodized for durability, and fitted with high-performance seals — compatible with mineral oil and DOT 4, and works with Enduro1 Cheater Levers or your existing setup.

✅ CNC-machined 6061 aluminum
✅ Hard-anodized finish
✅ High-performance seals
✅ Mineral oil and DOT 4 compatible
✅ Fits select GasGas, KTM and Husqvarna

Clutch controls are safety-critical. Installation and inspection by a qualified mechanic are recommended. Check full fitment before ordering.

Shop now: https://enduro-1.com/products/enduro1-cheater-slave-cylinder

09/15/2026

🏁 HOW DO YOU PREP YOUR MOUSSE?

Every racer has their own setup—what works for you?

👇 Drop your setup in the comments:

🔧 What size mousse drill do you use?
📏 How far apart do you drill the holes?
🔒 How many rim locks do you run?
🏍️ What’s your tire of choice?

Shop Enduro1 Mousse Drills:
https://enduro-1.com/products/enduro1-mousse-drills

09/14/2026

Up to 50% less effort on the clutch. Your hands will thank you. ✌️

The Enduro1 Cheater Pro Lever for Brembo clutch systems is built from 7075 aluminum with a Pro Dial adjuster, stainless hardware, and support for 1 or 2-finger operation — fits select Beta, GasGas, KTM, Husqvarna, and Sherco.

✅ High-strength 7075 aluminum
✅ 1 or 2-finger operation
✅ Up to 50% less effort
✅ Pro Dial adjuster included
✅ Stainless-steel screws and springs

Clutch controls are safety-critical. Installation and inspection by a qualified mechanic are recommended. Check full fitment before ordering.

Shop now: https://enduro-1.com/products/enduro1-cheater-pro-lever-brembo-clutch

09/12/2026

Less effort on the brake. More energy for the trail. ✌️

The Enduro1 Cheater Pro Lever for Brembo brake systems reduces pull force by approximately 10% — built from 7075 aluminum with stainless hardware and support for 1 or 2-finger operation.

✅ High-strength 7075 aluminum
✅ 1 or 2-finger operation
✅ ~10% less force required
✅ Stainless-steel screws and springs
✅ Fits select GasGas, KTM, Husqvarna, and Sherco

Brake controls are safety-critical. Installation and inspection by a qualified mechanic are recommended. Check full fitment before ordering.

Shop now: https://enduro-1.com/products/enduro1-cheater-pro-lever-brembo-brake

09/10/2026

Lighter pull. Less fatigue. More control when it matters. ✌️

The Enduro1 Cheater Pro Lever for Braktec systems requires approximately one-third less force for the same pull — so you can run 1 or 2 fingers with more precision through tough terrain.

✅ High-strength 7075 aluminum
✅ 1 or 2-finger operation
✅ Works as brake or clutch lever
✅ Stainless hardware
✅ Fits select GasGas and Husqvarna models

Brake and clutch controls are safety-critical. Installation and inspection by a qualified mechanic are recommended.

Shop now: https://enduro-1.com/products/enduro1-cheater-pro-lever-braktec

09/08/2026

Those chain-guide mounting tabs are more vulnerable than you think. 🛡️

The Enduro1 Chain Guide Guard 23+ is a lightweight, one-piece guard that protects the integrated chain-guide tabs on select GasGas, KTM, and Husqvarna models — helping you avoid costly swingarm damage down the line.

✅ Lightweight, one-piece design
✅ Protects chain-guide tabs
✅ Reduces risk of swingarm damage
✅ Fits select 2023+ GasGas, KTM, and Husqvarna

Check the full model and year fitment before ordering. Installation should be completed or inspected by a qualified mechanic.

Product details: https://enduro-1.com/products/enduro1-chain-guide-guard-23

09/08/2026