Moore Automotive Inc

Moore Automotive Inc Welcome to the official Moore Automotive, Inc. page! Tuning – Performance Installs – Repairs & Maintenance - Fabrication

07/11/2026

2008 Evo X on the dyno for a stock ecu flex fuel tune after fixing a lot of little issues and installing a new EXEDY twin disc clutch and upgrading the clutch master cylinder, as well as installing a new Walbro 450 pump, our flex fuel kit, and upgraded fuel pressure regulator kit. This stock engine with a Precision Turbo & Engine 5558 on a BSFab LLC top mount turbo kit with hood dump putting down 525whp/374tq on E72!

07/04/2026

Let freedom roar! 🇺🇸 Hope everyone has a fun and safe Independence Day weekend!

06/30/2026

We finished this Evo IX up a few months ago and the owner brought it back for its 1000 mile check up and to make it a little spicier 🌶️ The setup was already there to run ethanol, we just needed to pin the ecu to read ethanol content so the owner doesn’t need to mess with draining and refilling, just pump and go.

This build consisted of a MAPerformance built bottom end, the head was gone through and refreshed by HeadGames Motorworks and a Forced Performance FP Green turbo with an FP cast manifold. Fuel system consisted of a Walbro 450 fuel pump, Injector Dynamics 1300cc injectors, and a Radium Engineering®️ fuel rail and FUELAB | Fuel Systems pressure regulator.

Once again Chris Hoover did his thing and ended up at 541whp/461tq on E76, peaking 32psi tapering to 28!

06/19/2026

Good customer Tyler bringing in his 4th Evo for us to tune and get running right. This was a very nice, clean, and well built 8. We pinned the ecu to utilize the ethanol gauge output and performed a stock ecu flex fuel tune. With a Buschur 2.0L built engine, GSC Power-Division S2 cams, Sheepy turbo kit with a Precision Turbo & Engine 6062 and all supporting mods, Chris Hoover did his thing and pulled 671whp/529tq out of it on E72!

06/16/2026

Sebastian back for a turbo-back exhaust install and retune. Gaining over 30whp and 20tq, with faster response and spool up, and just a better overall curve over the stock exhaust! While this is pretty common knowledge at this point, it’s always good to reiterate what mods actually do for your car.

06/09/2026

2007 WRX back on the dyno for a retune after upgrading the fuel system. After got done on the keys it’s now putting down 371whp/342tq on 20psi with an old rotated Precision 60mm turbo setup (like up-pipe on the up-pipe set up 😅) Speaking of, this still has the stock manifold and up-pipe and the engine is the original 140k mile unit!

Couple Subies on the dyno today. 2020 WRX came in running pretty rough, we found a few things that needed to be addresse...
06/05/2026

Couple Subies on the dyno today. 2020 WRX came in running pretty rough, we found a few things that needed to be addressed and performed a walnut blast on the intake valves before hitting the dyno. Ended up at 300whp/340tq with just an intake, catted j-pipe, exhaust, and 3-port!
The 2016 STI also came in running rough due to a vacuum leak at a broken evap solenoid. After replacing that and the spark plugs she was running like new again, but a slipping clutch prevented any pulls above wastegate pressure (10psi) 😞
Both tuned via AccessPort

06/01/2026

Reinstalling the head on this cool SC300 with a 1.5JZ. Head refreshed by the awesome folks at

05/30/2026

Beautiful blue Evo 8 on the dyno for a flex fuel tune on a Elite on a FP Red turbo after getting the cylinder head refreshed with the guys at

has it putting down 558whp/442tq on E70 before running out of fuel flow!

05/30/2026

Mike brought his beautiful super clean Evo 9 down from Delaware today for a check over, 3-port boost solenoid install, and tune. Been a while since we’ve had an Evo this stock in here 😅 With just an intake, downpipe, high flow cat, and exhaust, has it making 322whp/325tq on 23psi. We kept it on the conservative side due to the stock fueling not keeping up. Next round we’ll upgrade injectors and pump along with some other goodies.

Address

7588 Capitol Way
Marshall, VA
20115

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+17033523535

Alerts

Be the first to know and let us send you an email when Moore Automotive Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Moore Automotive Inc:

Share