Alaria LLC

Alaria LLC offers problem solving parts to the automotive racing and performance industry.

09/28/2026

We released these camo windbreakers in Spring last year when the weather was getting warmer. A lot of you were quick to purchase and have enjoyed your jacket but THE TIME IS NOW if you haven’t gotten one as we finally have justifiable weather for these bad boys. Stock is limited so get one while you can. Also, T-Shirts! Find them both in our web store. Thanks for the support!

09/22/2026

Our S-Chassis brake booster delete spotted in 𝓐𝓢𝓗 Tj McFaul LS swapped S14. Tons of adjustment to help you get your brake pedal feel dialed in. In stock and ready to ship!

09/16/2026

Our E36 trans tunnel mod installed in an E46! Apparently very minimal work tapping the oem sheet metal out to meet the Alaria tunnel. While we have secured a chassis and are developing products specifically for the E46 chassis we thought this might help someone else building one in the meantime. Thanks Justin Chesnutt for the pics!

08/27/2026

Plenty of folks who appreciate a dialed in braking system on their drift and race cars have chosen our booster delete solution but did you know we also offer an ABS specific model? Pair with Tilton Engineering 79 series Master cylinders for the ultimate control without the costly and invasive install of a full pedal box. Current applications are the Nissan 350/ 370Z, S-chassis and the Subaru/ Toyota GT86 chassis also.

08/17/2026

Our R33/ R34 Attesa High Pressure hose kit. Shown with optional pressure sensor. Replace that tired, leaky old line with some true, Professional Motorsports grade hose and fittings.

08/11/2026

You see: rust free, super straight E46 manual coupe chassis ready to be made into a race car. We see: development potential for rear bulkhead/ firewall panel kits, transmission tunnels AND more! We are not the same. I know we’re late here for E46 parts but once we get some good scans we will get to designing and get product in production asap. Hold tight!

07/22/2026

Our booster delete kits shown here before and after hardware packaging. Everything you need except a balance bar and master cylinders from Tilton Engineering to have consistent, reliable and fully adjustable brakes on your track or drift car.

07/17/2026

Our E36 Coupe rear bulkhead panel kit was designed for a perfect fit in the Coupe but as Chelsea DeNofa shows here it can fit in a 4 door with a little trimming also and still save you a ton of time on your build. These are in stock and ready to ship in the “standard” version as shown here but also in a “rear rad” version that goes up to the rear window to accommodate those needing space to duct to a rear mounted radiator.

07/07/2026

1JZ engine hoist hooks are live also! Fits both vvti and non-vvti. We now have a solution for all JZ engines. Replace your missing or old ugly oem hoist brackets. Store these in your toolbox when not in use OR just leave them on cause they look so good.

07/03/2026

Christopher Tasama picked up one of our BNR32 Attesa HP line kits and got it installed right away. With the optional sensor he can now monitor attesa pressure right at the transfer case.
This ALARIA replacement ATTESA ET-S High Pressure Line was developed as a direct replacement for your 32+ year old factory line. These factory parts have been discontinued by Nissan, but are an integral part of the AWD system, leaving it non-functioning if they break. We designed the line to be a full front to back replacement, with all the lines/fittings and clamps necessary to install and fit like a factory piece using Motorsports grade materials.
* Designed to be used as a factory replacement
* Manufactured using XRP ProPlus Teflon lined, smooth bore Hose and crimped Hose Ends
* Includes heat sleeve and abrasion covering in high heat and high rub areas
* Comes with all fittings and clamps necessary for install
We’re now offering these lines with an optional pressure sensor and adapter; designed to install between the line and the transfer case, this part will allow you to utilize a pressure sensor in line to monitor ATTESA line pressure.
The Nissan ATTESA is an acronym for Advanced Total Traction Engineering System for All-terrain with Electronic Torque Split.

Address

5234 Glen Arm Road Unit 104
Glen Arm, MD
21057

Website

http://www.alariatech.com/

Alerts

Be the first to know and let us send you an email when Alaria LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Alaria LLC:

Want your business to be the top-listed autos & automotive service in Glen Arm?