Heavy Metal Fab

06/19/2024

Billet hose brackets for linkbar and subframe…
For 2” & 2.5” in stock… get with me today so you can get your rigging lookin clean…

06/18/2024

Orbitals, case fl**ges, heims, 2.5-ton & 5-ton brake kits available… Lets get your project going!!!😉🤙🏻

06/18/2024

Running a special again on our HMF billet steering manifolds, complete kit with fittings and mounting hardware… $185.00 plus shipping 👊🏻😎

06/18/2024

For a limited time I’ll be offering a free “formed” FTI case mount with purchase of any size case.👊🏻😎
Get with me today for a quote!!!

Look me up on my personal page, I don’t get messages on this page, too many spammers..

06/17/2024

Dropped the templates off to Jay Fab Inc. today💪🏻
While we’re waiting on parts and some other stuff.. We’re going to start on a couple set of hybrids 👊🏻😎 (new is an understatement) these rears are new new…😉🤙🏻
Justin Brock

06/15/2024

Templates for the sheet metal brackets for the stationary part of the steps.


😂

06/12/2024

We made it back!!!!! No issues!!!! Huge thanks to Justin Young for letting me use his toter and trailer to make the trip. And for making it possible at all..😉🤙🏻

Thanks again Dan Sisler and Winkey Temple for the hospitality. 😜👍🏻

06/11/2024

Hey Brandon Fontenot just wanted to let you know your Meritor billet hub covers are shipping out tomorrow. Thank your repeat business.

06/11/2024

Well…. This is what awaits us in the am.. 20. Fresh 5-ton rears, it took Winkey all day to uncrate these..😬😬

Winkey Temple I should be able to build plenty of hybrids with these…😜😜

06/11/2024

Stopped for the night, didn’t quite make it to Winkey Temple’s place today 😆 but we’re only about 1hr away.. Traffic was a bitch and it slowed us down quite a bit, but that’s to be expected when you’re like 80’ long trying to maneuver through traffic like sxs’s at a mud event 🤣

Here’s a picture Ian White shared the other day of the HMF hydraulic step kit we sent out to him.
Thanks again for your business and support 👊🏻😉

06/05/2024

Brandon Fontenot thank you for your support/ business.
5-ton pinion drive fl**ge covers qty-2
2” linkbar hose/brake line clamps qty-10
Steering manifold kits qty-2
5-ton kingpin top plates qty-4 (one with tab for self centering cable)

This will go nicely with the 2” swaybar blocks you ordered a couple of weeks ago 😜🤙🏻

05/30/2024

05/30/2024

What’s up Peeps???

From all the way down (where the shocks would be bottomed out) to where the shocks would be almost fully extended and back to ride height. (As far as the suspension goes)
With all the suspension travel the axles only travel a total of a 1/2” back and forth.😉

Shocks and swaybar links tomorrow 😎
Paul Walk

05/29/2024

Time to build the 2.75” OD .250” wall DOM linkbars😈

Sniper Gearboxes by FTI Performance is in so I can get driveshaft lengths 🤙🏻

Had to lower the truck down onto the “small truck jack stands”🤣

Paul Walk

05/28/2024

Back at it!!!

Busy day… front axle is ready to go underneath the 🤙🏻

Paul Walk

05/28/2024

Looks like the got another this weekend at The Beach Bash
truck show…💪🏻💪🏻
Thanks Alan Henry for dropping it off😎
If you guys keep getting these trophies and giving them to me I’m gonna need a second shop just to store them🤣🤣
Will MacDonald
Cody Jinright
Alan Henry

05/28/2024

Thank you Matt Walker for your buisness and patience.
He received his 20” D.A. 26” wide wheel shells today…😉🤙🏻

05/26/2024

Everyone having a good Saturday?😜
Playing a little catchup today, I got a piece of steel in my eye Thursday evening so yesterday morning I had to go get it removed, so I was laid up yesterday with my eye feeling like it was filled with dirt 😆
So today around 1:00 I said F-it and went out to makeup some lost time.😬
Rear axle is completely welded up and underneath the truck (not centered yet)😉
And tomorrow I’ll be getting the front axle underway..💪🏻💪🏻

Paul Walk

Peace out ✌🏻 everyone have a great holiday weekend…

05/23/2024

Gilb Ive got some nice 5-ton fronts and some discs here with your name on them.😈
See you tomorrow and thank you for your repeated support/ business.

05/23/2024

Justin Brock we’re getting a set of PS-250’s stripped down to start on your set of hybrids..💪🏻💪🏻

05/23/2024

Keith Shields has engaged BEAST MODE!!😈
Them new 67/34/26’s are looking fresh on those 26”x30” HMF wheels!!!
Also check out those HMF kingpin plates😎

Thanks for the pics 🤙🏻

05/22/2024

Getting more wrapped up on the first axle.
Tomorrow I’ll get the upper linkbars mounts located on the helmet and get the steering tie bar fabricated.


Paul Walk

05/22/2024

Cruising along…👍🏻
Tomorrow’s goodies are lined up and ready.


Paul Walk

05/20/2024

Flanges on both axles🤙🏻
One axle is ready for a chunk🤙🏻
I’m beat… ✌🏻😉


Paul Walk

05/20/2024

Thanks Travis Stratton!!! These things are really cool!!!😎🤙🏻

05/18/2024

Looks like I have some hybrids to build😈
Thanks for the 16 fl**ges and the new centering pucks. Robinson
Plus a huge box of billet goodies 😈

05/17/2024

I can fix you up with…
Heims?
Orbital valves?
Boots?
Bearings?
Seals?
BigShocks.com?
And much more… message me or shoot me a text.. three 8 six-five 66-seven 4 six 0

05/17/2024

💥💥SOLD!!!💥💥

$1500.00 not going any lower…. I’ll keep them if they don’t sell..

05/17/2024

Anyone looking the best prices on Sniper Gearboxes by FTI Performance hit me up!!
I can even put together a package deal with a formed sheet metal mount along with 2.5-ton fl**ges or 5-ton fl**ges. With a variety of sizes and ratios I’m sure I can fix you up.💪🏻💪🏻