DRSC Automotive

07/30/2026

Had this beautiful 35 ford from Vescios Customizing And Restorations in for a custom tune and to get the transmission dialed in. This classic features a GM powertrain drop in package with. 495hp la3 and a 6l80 in it. After some street logs and getting the speed correct for the set up we were able to get it shifting properly and driving right, then to the dyno to dial in the performance. Stock out of the box GM calibration made 358hp and 328tq after some strikes on the key board by 2 The Grid Motorsports we where able to make 394hp and 381tq and picking up a massive amount under the curve!

07/23/2026

Another beautiful S550 Mustang GT tuned and ready to rock! This is my personal favorite street car combo, JLT Cold air intake kit and long tube headers on both e85 and pump gas!

Big thanks to Palm Beach Dyno whom we use for a majority of our ford tuning

Final pump gas numbers are 495hp and 399tq
Final E85 numbers came in at 525hp and 424tq

This is on our Dynojet Research Inc. Vector X4000 hub dyno which reads about 7% higher than a wheel dyno which puts this right in line with what these cars make on average

04/04/2026

04/04/2026

Since Mother Nature hasn’t let spring kick off, DRSC Automotive wants to kick it off with a BOOST! From now until the end of April we are running a promotion on Whipple superchargers. Purchase a Whipple supercharger system and get 50% off install, and recieve before and after dyno numbers from our in house Dyno jet Vector x4000 hub dyno!

If you are looking for a kit to install your self we can also assist with that, just reach out and get a quote

Jump on our website at www.drscauto.com and submit a service request if you are interested.

03/07/2026

1959 Apache on the dyno tonight, 6.0l/6L90e swap, stock minus a custom tune, let’s see who can guess the closest to the horsepower and tq number. I’ll throw in a 10% discount (some restrictions apply) on your next visit, to who ever gets the closest.

02/23/2026

We had a spicy 3 rotor on the dyno this weekend 910rwhp! Which is the highest we have had on the dyno. Some big builds coming up that should beat it.

01/24/2026

Another successful completion of a Haltech install and tuning by Tuned by Shawn on this beautiful Nissan 240 with a naturally aspirated KA in it on our Dynojet Research Inc. Vector X-4000 hub dyno!

If you are in need of dyno time please feel free to schedule online with our interactive live schedule at www.drscauto.com

01/14/2026

New website is live! This current revision focuses on our new Dyno rental, performance build consultation, performance build request form and general automotive repair request form at www.drscauto.com we look forward to making it easy to get connected with us!

Shopmonkey

12/20/2025

We would like to share 4SFED with all our followers now that this beautiful car is back home with her caretaker, a labor of love we have worked on over the past year for one of our favorite clients.

Basic run down is W201 Mercedes 190e that we stuffed a BMW M52 into along with a turbosmart 6870 and rowing gears are accomplished via a 6 speed manual borrowed from a bmw 330i

This car came to us with a stock anemic 4cyl with mechanical fuel injection and all of 60rwhp (seriously it was tough to go 65mph on the hwy with it) and ended up leaving with 448rwhp on pump gas and 562rwhp on e85 all flawlessly controlled via a Haltech nexus r3 for the engine side and a pdm16 for the chassis side, a UC10 dash displays all functions and a key pad allows adjustable boost, launch control and a few other killer features like selectable exhaust from super sleeper silent to full on race mode straight pipe. The car was tuned by Tuned by Shawn our in house expert on haltech engine management systems.

Some other cool features we did on this car include:
-custom water to air intake manifold with design ques from the b58 engine
-tubular front radiator support
-3d printed center counsel with charge ports/keypad mounting/dsp mounting, etc
-factory Evo 2 exhaust tip
-evo 1 body kit
- full stereo system
-chassis mounted shifter
-lots of powder coated goodies
-full engine bay smoothing and painting
-wire tuck
-coil overs

We want to wish our customer a summer filled with fun next summer and hope to see it out and about at some shows!

11/14/2025

Sometimes working with your neighbors means taking on something a lil out of the norm.

A local grandmother called us in a frantic panic when her grandsons favorite toy was no longer working and she said she had called everyone and no one would work on it or even take a look at it. Of course we can’t have grandma or grandson upset or missing out on fun kid time so we said drop it off.

A quick tear down and inspection showed a few connections loose and one motor wire had fallen off, we put new connectors on it, a new battery as the old one had failed and a newer style charger port, tested all operations and got them all set up for a fun weekend this weekend!

We hope this makes you smile as much as it did to us!