Esslinger Engineering

09/24/2026

Parts keep arriving for aluminum D-port heads, things must be getting close! The first 26 castings were sent to heat treat yesterday and the next 24 castings will be ready for heat treat in about a week.

If you have reserved an Aluminum D-port Head, and you want to take advantage of a 20% discount on the parts to go in the head, reach out to us at (909) 539-0544 or [email protected]. We are making 50 heads and have ordered enough valvetrain parts for 10 solid roller heads and 20 that are not solid roller. When these valvetrain parts are all spoken for the price will go back up to normal price!

09/24/2026

Anyone know how to get ahold of Adan Vasquez?

We have something ready for his Focus RS but can't seem to get ahold of him via the phone number we have on file...

09/24/2026

Just received our batch of valvecovers just arrived and they look nice!

Over the next few weeks we will get them machined and shipped out to everyone that pre-ordered. The foundry made 7 extra castings so if you didn’t get in on the pre-order you can still get one if you act fast!

Visit www.esslingeracing.com to jump on one of the few available valvecovers at the discounted pre-order price!

09/23/2026

Anyone have the USB driver they can send us for MBE Systems' USB to CAN adapter?

Send a message to learn more

09/18/2026

Okay guys, it's September 17th and we're less than 2 weeks away from closing pre-orders on our 9 inch deck height HD Ford 2300 blocks. Right now we have just shy of our minimum requirement of 20 pre-orders. We very likely will hit that 20 pre-order minimum by the end of the weekend. With that said, if you want one, now is the time to get it ordered. September 30th will be the last day to pre-order one! If you want more information on these blocks and what makes them so special, check them out on our website or give us a call. www.esslingeracing.com or (909) 539-0544

After almost 15 years since our previous batch of 9 inch deck height Heavy Duty blocks we have decided to explore producing them again for early (Q1) 2027 delivery! We will be accepting pre-orders through the end of September - - - - Esslinger Racing

09/07/2026

Also should remind everyone that there is a pre-order on our cast aluminum Ford 2300 SOHC valvecovers too.

Here's a link directly to the valvecover pre-order on our website:

*** Pre-order now to get on the list to purchase one of these cast aluminum Esslinger valvecovers. Only $250 deposit is required to reserve 1 of the 30 valvecovers in this batch. Coming back into inventory e - Ford 2300 SOHC Wetsump Valvecover - Covers

09/07/2026

Reminder, if you are interested in a tall deck (9inch) Ford 2300 SOHC block, get in on the pre-order before the end of the month!

Here's a link directly to the H.D. 9" deck height block info and pre-order on our website:

After almost 15 years since our previous batch of 9 inch deck height Heavy Duty blocks we have decided to explore producing them again for early (Q1) 2027 delivery! We will be accepting pre-orders through the end of September - - - - Esslinger Racing

09/05/2026

Pre-order bank is now open for a new batch of our 9 inch deck height H.D. Ford 2300 SOHC blocks! Pre-orders will only be accepted until the end of September! For more information click on the following link:

https://esslingeracing.com/blocks-1/esslinger-hd-9-deck-height-block?search=block&category_id=0

If you are serious about making big power, n/a or turbocharged, you will need one of these blocks! It's been almost 15 years since we last produced a batch of these blocks. With these blocks N/A engines can be built as big as 3295cc, and 1000hp+ capable turbo engines as big as 2989cc!

Extra thick main webs and billet maincaps with ARP hardware make the bottom-end of these blocks the strongest option available!

Siamesed bores allow for huge power and thick cylinderwalls!

9 inch deck height and cast in stroker crank clearance allow for massive increases in displacement without fear of grinding a hole through the block!

For the first time ever, we will be including the required 1.625" journal billet intermediate shaft at no additional charge to match up with the roller bearings in the block!

Finished price on the blocks will be $3750 and you can reserve a block in this batch with a deposit of $1,250.

08/26/2026

We’re looking to hire the right customer service/ salesperson A.S.A.P.. Is that you, or someone you know? Email us your resume

-Overall general knowledge of automotive mechanical things is important. We can teach the right candidate about our products.

-Strong communication skills are mandatory

-Must be outgoing and ready to fit into a great team!

-Medical insurance premium is paid by our company after 90days

-Paid vacation time after 1 year

-Bi-weekly paychecks

Work hours are 8-5 Monday through Friday

Email your resume to: [email protected]

08/22/2026

We are now taking pre-orders for a batch of 25 cast aluminum Ford 2300 SOHC valvecovers that are in process and will begin shipping November 1st!

$250 reserves 1 of the 25 valvecovers we are making in this batch. Total price will be $499.99 after the pre-order ends. A $50 discount will be applied for anyone that purchases a valvecover during the pre-order.

For more information or to place an order visit www.esslingeracing.com and search “valvecover”

Yes, we understand that the price is more than double what they sold for previously. We are committed to maintaining production here in the U.S. with castings made right here in Southern California and all the machining done in-house on our own equipment. This is done in an effort to offer the highest quality parts available anywhere. We hear the horror stories about leaks and fitment issues with other aftermarket valvecovers and after repeated requests from our customers we decided to make another batch of our cast aluminum valvecovers. They are known for being good looking and not leaking which to many of our customers will make them worth the price.