Longbow Custom

Longbow Custom Choppers, Bobbers, Baggers and stockers. Knucks, Pans, shovels, Evo's and newer. Strokers, big bores

Made a couple brackets this week for my softail. Upgraded to two single coils and a Carl's Typhoon carb. Didnt like any ...
01/06/2026

Made a couple brackets this week for my softail. Upgraded to two single coils and a Carl's Typhoon carb. Didnt like any of the brackets available so I made some that kept things nice and tight and strong and minimalistic. Most everything available was either to big, awkward or gaudy. These are pretty simple. Even being simple "one off" stuff takes a lot of time to make.

If you are running an S&S you need to seriously consider adding a Thunderjet.  It gives your carb a third fuel circuit a...
10/24/2025

If you are running an S&S you need to seriously consider adding a Thunderjet. It gives your carb a third fuel circuit and allows for a better tune from idle to WOT. It allows you to lower your main for a super smooth transition from intermediate jet to main then the Thunderjet takes over on the top end to feed your engine.

05/22/2025

Added a couple S&S super G carbs lately to a couple customers bikes as well. One drilled and Thunderjet installed.

I'm horrible about posting stuff but last evo build has been done a few weeks.
05/22/2025

I'm horrible about posting stuff but last evo build has been done a few weeks.

80" evo build next on the list.
12/04/2024

80" evo build next on the list.

79 ready to head to Wichita.
12/04/2024

79 ready to head to Wichita.

Little stock 74 heading to Vicksburg, MS.
11/29/2024

Little stock 74 heading to Vicksburg, MS.

I hope everyone shares this around.  Lol.  This is what you are doing business with if you support Bartlesville shooting...
11/10/2024

I hope everyone shares this around. Lol. This is what you are doing business with if you support Bartlesville shooting Supply. Also just look her up on odcr and you can see the person you are dealing with as well. Good luck. This is unwarranted slander and abuse. These people have also told people they are part owner in my shop as well. I built this business with my own two hands and worked 80-100+ hours a week to make it. I am and have been the only owner of this shop.

Not my most utilized machine but definitely one of my favorites. Sunnen precision honing machine. Honing cylinders after...
11/05/2024

Not my most utilized machine but definitely one of my favorites. Sunnen precision honing machine. Honing cylinders after boring, main races, and of course lifter blocks and everything else that needs a precise hole honed. I can't imagine not having this machine. Lots of shops just replace lifter blocks or just run them worn out. Not here. This set took a set of .005 over lifters. I can typically get them as large as .020 over if they have them. Way cheaper than replacing blocks and I get to reuse that 30-80 year old part.

Have quite a knucklehead collection beginning. Still love my Panheads and Shovelheads though.
07/18/2024

Have quite a knucklehead collection beginning. Still love my Panheads and Shovelheads though.

02/20/2023

From this day forward if you need tires they will be paid for in advance if you provide the tire size. If you are wrong on tire size you will be the owner of a tire the wrong size. So your best bet is to bring the bike in and let me see for myself to double check. Pictures of tire or info you pull off the internet will not suffice for a refund. I have to pay restocking fees, time to ship, time waiting to get some of my money back etc. I will no longer be taking responsibility for other actions or failure to read tire sizes. I am in business to make money not collect tires. I will be out of business within the year if I allow this behavior to continue.

This liable to be a bit of fun
12/30/2022

This liable to be a bit of fun

Address

220 S Chickasaw Avenue
Bartlesville, OK
74003

Opening Hours

Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+19188152968

Website

Alerts

Be the first to know and let us send you an email when Longbow Custom posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share