เปิดทำการกี่โมง?

จันทร์ 10:00 - 18:00 อังคาร 10:00 - 18:00 พุธ 10:00 - 18:00 พฤหัสบดี 10:00 - 18:00 ศุกร์ 10:00 - 18:00 เสาร์ 10:00 - 18:00

เว็บไซต์คืออะไร?

https://www.facebook.com/525671570841041/

Fast Performance

ตัวแทนจัดจำหน่าย
Speedflow
Pfitzner Performance Gears (PPG)
Turbosmart
Haltech
Ross Performance
DJ Safety
Ultrasuede
Holley
ITG Airfilters
(978)

ตัวแทนจัดจำหน่าย

Turbosmart
Speedflow
Emtron
Plazmaman
Haltech
P1 Advanced RaceWear
MME Motorsports
Mainline Dynos
PPG Gears
PWR Performance
Bullet Engineering
Davies Craig

24/09/2026

... Emtron World🌎ED10M not just another dash but complete full blown Motorsport live telemetry data centre with highest logging speeds in the industry with up to 2000hz... 👌
- 10.3 inch TFT Screen – 1920 * 768 Resolution
- Anti Glare / Scratch Resistant Optical Bonded Glass
- 16x High Intensity RGB LEDs
- High Speed Gigabit Ethernet 1000Mbps
- High Speed Logging (Up to 2000Hz)
eMMC 64GB On-board logging memory
- Real-Time clock for datalogging
- 3-axis Accelerometer and 3-axis Gyroscope
- 4x CAN Bus
- 4x Video Input
- Headphone LR Output
- Mic LR Input
- 8 x Analog External 0.0 -5.0V Inputs (see Pinout)
- Selectable CAN 120 Ohm Termination
retail 171'000thB @ Fast Performance and trusted partner

24/09/2026

The hot side just got cooler. 🧊

Introducing water-cooled turbine housings for Turbosmart 🇦🇺 B-frame turbochargers.

When a turbo’s packed tight in a jet ski hull or a cramped boat bay, turbine heat has nowhere to go, melting hoses and cooking wiring. These housings bring cooling straight to the source and pull that radiant heat out.

The result? 243°C down to 70°C. A 71% drop in housing temperature.

Proven 62mm B-frame platform. 0.82 A/R, V-band outlet, standard rotation. Cast from 310s high-temp stainless to take the heat. Water in and out through M14x1.5 ports with a crush washer seal for clean banjo fittings and simple plumbing.The hot side just got cooler. 🧊

Introducing water-cooled turbine housings for Turbosmart 🇦🇺 B-frame turbochargers.

When a turbo’s packed tight in a jet ski hull or a cramped boat bay, turbine heat has nowhere to go, melting hoses and cooking wiring. These housings bring cooling straight to the source and pull that radiant heat out.

The result? 243°C down to 70°C. A 71% drop in housing temperature.

Proven 62mm B-frame platform. 0.82 A/R, V-band outlet, standard rotation. Cast from 310s high-temp stainless to take the heat. Water in and out through M14x1.5 ports with a crush washer seal for clean banjo fittings and simple plumbing.

Built for marine, but at home anywhere heat is the enemy...👌🏻

Built for marine, but at home anywhere heat is the enemy...👌🏻

14/09/2026

For Team Turbosmart 🇦🇺 it was a standout weekend at the World Time Attack Challenge'26 two weeks ago.

Turbosmart-turbocharged cars were on the podium in every one of the six classes on offer: Pro, Pro Am, Pro Open, Open, Clubsprint and Tuner. That's eight 🏆🏆🏆🏆🏆🏆🏆🏆podium finishes in total, including three 🥇🥇🥇outright class victories as following:

- 2nd Pro Class: Alex Rullo - Rullo Motorsports Lamborghini Gallardo - 1:22.4410

- 1st Pro Am Class: Drew Hall - CRD R34 Skyline - 1:26.3790

- 2nd Pro Open Class: Nathan Morcom Global Aircraft Services Mitsubishi Evo - 1:22.2850

- 1st Open Class: Darren Bishop - Mitsubishi Evo - 1:27.4810

- 2nd Open Class: Jamie McGloin - Global Aircraft Services Mitsubishi - Evo - 1:31.0170

- 1st Clubsprint Class: Alex Michalsky Plazmaman Mitsubishi Evo - 1:29.9280

- 2nd Clubsprint Class: Jimmy Assad ERS Performance Evo - 1:30.5370

- 2nd Tuner Class: John Nguyen - Sydney Composite Ospire Toyota Supra - 1:38.0010

14/09/2026

.. Bosch 🇩🇪 55mj R8 coils in stock at @ Fast Performance...

2'900.-/coil incl plug and pins

11/09/2026

Watercraft Pro has built another mental turbocharged GP1800 SVHO.
This one hit World Time Attack Challenge armed with a Turbosmart 🇦🇺 6262 Turbo, HyperGate45 external wastegate + full TS catalog, and it’s every bit as wild as that sounds... It also debuted a prototype of our new water-cooled turbine housing, cutting temps by 71%.Watch this space... 👀

10/09/2026

Serious oil control for serious Honda performance.

AT Power Motorsport Products’s 🇬🇧 K20A/K24 Integrated Dry Sump System is a race-proven, billet-machined solution featuring a 3-stage oil pump with no external belt drive.

Designed to reduce oil starvation, crankcase pressure and oil-related limitations under extreme conditions, giving your K20/K24 the reliability it needs on track. 🇬🇧

09/09/2026

As part of Haltech's 💛💛💛 40th anniversary, Generic CAN (GCAN), a fully user-programmable CAN bus, is now available in beta across eligible Nexus models. Customers need to opt in to get it, it's not automatically pushed to their ECU, but expect questions from day one regardless.

What is it?

GCAN lets customers configure their own CAN messages, so they can wire in and set up OEM dashes, CAN switches, and sensors, not just the devices Haltech has pre-built support for. It ships standard on new Nexus units, and it's delivered as a firmware upgrade so it's also field-upgradable on eligible Nexus units already sold.

Eligible Devices:

- Nexus T1, T2, S2, S3, R3, R5
- Nexus Plug-in range
- iC-7 and uC-10 displays

What this means for you

• Self-service. GCAN is a customer-installable NSP update. Customers update to NSP (Nexus Software Programmer) version 1.48 or later, then enable "Opt-In to Beta Firmware Versions" under Preferences > Firmware Update Options to get the beta firmware:

V1.36 for ECUs, V2.36 for dashes. This is a beta, so set expectations with customers accordingly.

• Existing shelf stock does not ship with GCAN firmware pre-loaded, and doesn't need updating before sale, the customer or tuner handles this at install time.

• Good one to mention to customers who've been on the fence about Haltech's flexibility.

• The beta firmware is open to anyone who wants to opt in totally free of charge

01/09/2026

Haltech 💛 managed LIBERTY WALK COLLECTION 4-Rotor R35 sitting pretty in Darling Harbour at this morning’s World Time Attack Challenge launch!

31/08/2026

... After a few weeks back order due to popular demand the fully customizable Haltech 💛 💛 💛 logger dashed soon back in stock @ Fast Performance & dealers...

Get your orders in now to make sure you'll get yours with the next production lot to be leaving for Thailand very soon ... 🤘🏻

ที่อยู่

136/5 Prachauthit Road 76
Bangkok
10140

เวลาทำการ

จันทร์	10:00 - 18:00
อังคาร	10:00 - 18:00
พุธ	10:00 - 18:00
พฤหัสบดี	10:00 - 18:00
ศุกร์	10:00 - 18:00
เสาร์	10:00 - 18:00