What are the opening hours?

Monday 9am - 6pm Tuesday 9am - 6pm Wednesday 9am - 6pm Thursday 9am - 6pm Friday 9am - 6pm Saturday 9am - 6pm

BM Engine Works

Home
United Kingdom
Rainham
BM Engine Works

BM Engine Works is the best place to buy new, used, secondhand and reconditioned replacement BMW engines, cylinderheads, gearboxes and ancillaries in the UK.

We operate from Greater London and serve our customers living all over the UK.

25/09/2026

Is your BMW X5 showing warning lights, losing power, or suffering from EGR valve issues?

EGR system blockages and internal leaks cause heavy soot contamination, excessive smoke, and performance degradation. BM Engine Works specialises in BMW X5 engine rebuilding, reconditioning, supply-only, and complete supply-and-fit solutions.

Common Symptoms:
• Rough idling or hesitation
• Loss of power & poor acceleration
• Excess smoke & illuminated warning lights

Primary Causes:
• Carbon build-up in the EGR valve
• EGR cooler blockage or internal leaks
• Soot contamination from repeated short journeys

Engine-Performance Risks:
• Reduced fuel efficiency
• Increased emissions & limp-mode issues
• Potential overheating or long-term engine damage

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/xseries/x5/engines

Call us at: 01708 556 721

24/09/2026

Noticing power loss, warning lights, or excessive exhaust smoke in your BMW X4?

DPF blockages cause backpressure that leads to severe turbo strain, higher fuel consumption, and reduced engine efficiency. BM Engine Works offers specialist DPF solutions, engine diagnostics, and complete repair services.

Common Symptoms:

• Loss of engine power & limp mode
• Poor fuel economy & higher consumption
• DPF / engine warning lights illuminated
• Excessive exhaust smoke

Primary Causes:

• Repeated short trips preventing regeneration
• Heavy soot build-up in the DPF system
• Interrupted regeneration cycles
• Faulty differential pressure sensors or EGR issues

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/xseries/x4/engines

Call us at: 01708 556 721

23/09/2026

Hearing a rattling noise on cold starts or experiencing rough idling in your BMW X3?

Timing chain wear is a known issue on BMW X3 engines that can lead to loss of timing accuracy, valve-to-piston contact, and severe internal engine damage if left unchecked. BM Engine Works delivers expert engine rebuilding and reconditioning backed by over 30 years of specialist experience.

Common Symptoms:
• Rattling noise on cold start
• Engine warning light or timing fault codes
• Rough running or misfiring

Key Causes:
• Timing chain stretch over time
• Worn chain guides or tensioner issues
• Poor oil quality or missed service intervals

Engine-Damage Risks:
• Loss of timing accuracy
• Valve-to-piston contact
• Severe internal engine damage

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/xseries/x3/engines

Call us at: 01708 556 721

22/09/2026

Looking for specialist care to keep your BMW X3 running stronger for longer?

At BM Engine Works, we specialise in BMW engine sales, rebuilding, and reconditioning. Whether you need supply-only or supply-and-fit services, our team delivers quality results you can trust.

Why Choose BM Engine Works?

• Save up to 40% when you enquire online.
• 30 Years of Experience as dedicated BMW engine specialists.
• Free Expert Technical Advice for all your engine problems.
• Advanced Engine Diagnostics & professional fitting services.

Vehicle Recovery Service Available across the UK.

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/xseries/x3/engines

Call us at: 01708 556 721

21/09/2026

Noticing oil leaks around your engine bay or a burning oil smell from your BMW 435i?

Noticing oil leaks around your engine bay or a burning oil smell from your BMW 435i?
A leaking oil filter housing gasket can lead to severe component contamination and progressive oil loss if ignored. Trust BM Engine Works for specialist BMW engine reconditioning, diagnostics, and gasket repair services backed by 30 years of experience.

Common Symptoms:

• Burning oil smell coming from the engine
• Visible oil leaks around the engine area
• Low oil level warning on the dashboard
• Smoke emerging from the engine bay

Key Causes:

• Worn or hardened gaskets due to age
• Heat and age-related seal deterioration
• High engine-bay temperatures
• Poor previous repairs or seal installation failures

Engine-Damage Risks:

• Oil contamination of drive belts and surrounding engine components
• Progressive oil loss leading to insufficient lubrication
• Engine overheating risks
• Severe internal engine wear if left unaddressed

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/4series/435i/engines

Call us at: 01708 556 721

18/09/2026

Is your BMW 520d suffering from loss of power, frequent DPF regeneration, or warning lights?
Short journeys and soot build-up can clog your Diesel Particulate Filter (DPF), causing severe exhaust strain and reduced performance. BM Engine Works delivers expert engine diagnostics, DPF reconditioning, and rebuilding services to restore your car's efficiency.

Common DPF Blockage Symptoms:
• Loss of power and poor acceleration
• Frequent DPF regeneration attempts
• Warning lights or vehicle going into limp mode
• Excess smoke and reduced fuel economy

Main Causes:
• Short, frequent journeys preventing full regeneration cycles
• Excess soot build-up inside the filter
• Faulty injectors, EGR issues, or improper combustion
• Sensor issues affecting regeneration cycles

Engine Performance Risks:
• Reduced overall engine efficiency
• Heavy strain on turbo and exhaust systems
• Increased fuel consumption
• Long-term engine damage if ignored

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/5series/520d/engines

Call us at: 01708 556 721

17/09/2026

BMW 640i Engine Failures

Noticing oil drips on your driveway or a burning oil smell from your BMW 640i?
A leaking oil filter housing gasket might seem minor, but ignoring it can cause severe oil starvation, component contamination, and complete engine failure. Trust BM Engine Works to resolve gasket leaks before they become costly repairs.

Common Symptoms:
• Oil accumulation around the filter housing area
• Burning oil smell or smoke from the engine bay
• Low oil level warning light on the dashboard
• Oil drips or stains after parking

Common Causes:
• Gasket ageing & severe heat exposure over time
• Hardened, brittle, or cracked rubber seals
• Repeated thermal cycling & delayed servicing

Engine Damage Risks:
• Oil loss leading to inadequate internal lubrication
• Contamination of nearby drive belts and engine components
• Overheating and accelerated engine wear

Call us at: 01708 556 721

16/09/2026

Is your BMW 640d rattling on cold starts or running rough?
A worn timing chain can stretch and snap, leading to severe internal engine damage. With 30 years of BMW engineering expertise, BM Engine Works delivers precision 640d reconditioning and rebuilding to keep your engine performing smoothly.

Common Symptoms of Timing Chain Failure:

• Rattling noise from the engine (especially on cold start)
• Loss of power and poor acceleration
• Engine misfires or rough running
• Illuminated engine warning light
• Reduced fuel economy & difficulty starting / longer crank time

Underlying Causes We Fix:

• Chain stretch due to high mileage and normal wear
• Poor engine oil maintenance or incorrect oil specification
• Faulty chain tensioner, worn guide rails & sprockets
• Overheating leading to increased wear
• Sludge build-up restricting proper oil lubrication

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/6series/640d/engines

Call us at: 01708 556 721

15/09/2026

Concerned about oil pump drive chain failure on your BMW 428i N20 engine?
The oil pump drive chain on the BMW N20 engine can wear over time, leading to serious oil starvation and engine damage. Catching issues early saves you thousands in engine replacement costs!

What Causes N20 Oil Pump Drive Chain Failure?

• Poor Maintenance: Extended oil-change intervals degrade protective properties.
• Low Oil Quality: Inferior oil or incorrect specs reduce lubrication.
• Chain Stretch: Natural wear on tensioners and chains over time and mileage.
• Frequent Cold Starts: High mileage and repeated cold starts accelerate wear.
• Debris Contamination: Metal particles and sludge build-up in the oil system.
• Excess Engine Stress: Hard driving, heavy loads, or tuned engines.

Get a Free Quote: https://www.bmengineworks.co.uk/model/bmw/4series/428i/engines

Call us at: 01708 556 721

14/09/2026

is your BMW 430d suffering from hesitation, rough idling, or reduced fuel economy?

Swirl flap failure in BMW diesel engines can cause severe internal damage if broken components drop into the engine cylinder. With 30 years of BMW expertise, BM Engine Works delivers full engine rebuilding, reconditioning, and intake system solutions.

Symptoms of Swirl Flap Failure:

• Uneven acceleration and loss of engine power
• Rough idle or hesitation during throttle acceleration
• Increased smoke from exhaust or poor fuel economy
• Check engine light illuminated on dash

Common Causes We Diagnose & Repair:

• Heavy carbon build-up in the intake manifold
• Wear or physical breakage of swirl flap mechanism
• Oil contamination mixed with soot deposits
• Long-term intake stress under diesel operation

Call us at: 01708 556 721

Address

Unit 6, K-9 Trading Estate, Ferry Lane
Rainham
RM139YH

Opening Hours

Monday	9am - 6pm
Tuesday	9am - 6pm
Wednesday	9am - 6pm
Thursday	9am - 6pm
Friday	9am - 6pm
Saturday	9am - 6pm

Telephone

+441708556721

Website

https://www.bmengineworks.co.uk/

Alerts

Be the first to know and let us send you an email when BM Engine Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Cars & Car Service in Rainham?