Race HQ Suspension and Dyno

Race HQ Suspension and Dyno Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Race HQ Suspension and Dyno, Motorsports Store, 3-6 Park Centre, Station Road, Leeds.

Race HQ is a motorcycle performance centre in Leeds, West Yorkshire, specialising in dyno tuning, engine building & tuning, race prep, suspension servicing & upgrades, repairs and performance parts for road, track and race motorcycles.

First run out on the PW50 with Ryan Cooper at Cowm Leisure Offroad Centre today. Happy 4th birthday son πŸ’™
05/09/2026

First run out on the PW50 with Ryan Cooper at Cowm Leisure Offroad Centre today. Happy 4th birthday son πŸ’™

Good day out Croft Circuit on the James Whitham Track Training Days trackday this week. The 2025/6 S1000rr is a great tr...
15/08/2026

Good day out Croft Circuit on the James Whitham Track Training Days trackday this week. The 2025/6 S1000rr is a great track bike straight out of the box πŸ‘

07/07/2026

πŸ”₯ 2024 BMW S1000RR in for an ECU flash! πŸ”₯

Since 2020, the S1000RR has used wideband lambda sensors, allowing the ECU to target specific air/fuel ratios across the rev range. As part of our ECU calibration, we optimise these factory settings for improved performance and rideability.

βœ… Optimised AFR targets
βœ… Lower fan activation temperatures
βœ… Rear narrowband sensor error disabled
βœ… Exhaust valve error disabled
βœ… Deceleration fuel cut disabled
βœ… Cold start disabled
βœ… Lots more features available, plus audible traction control

Every flash is tailored to get the most from your bike while improving throttle response and overall rideability.

πŸ“ Race HQ UK – LeedsπŸ“ž 0113 258 2319πŸ“§ [email protected]🌐 www.racehq.co.uk

Top day at Donington Park today aboard the Honda Fireblade! πŸ‘Œ Still can't remember my way around this place, but it was ...
02/07/2026

Top day at Donington Park today aboard the Honda Fireblade! πŸ‘Œ Still can't remember my way around this place, but it was a great day on track, even with the wind making things interesting! πŸπŸ’¨

Looking forward to going back in a few weeks

🏁 Track prep time! 🏁This 2025 BMW S1000RR is ready to hit the track after being fitted with a fresh set of Dunlop Motors...
01/07/2026

🏁 Track prep time! 🏁

This 2025 BMW S1000RR is ready to hit the track after being fitted with a fresh set of Dunlop Motorsport KR106/KR108 slicks.

Maximum grip, confidence and performance for Brands Hatch this Friday. πŸοΈπŸ’¨

Whether you're racing or chasing PBs, the right tyre setup can make all the difference.

Who's heading to Brands Hatch this weekend? πŸ‘‡

πŸ“ Race HQ UK – Leeds
πŸ“ž 0113 258 2319
βœ‰οΈ [email protected]
🌐 www.racehq.co.uk

30/06/2026

🏍️ 2023 BMW S1000RR in for an ECU reflash. First job is reading the ECU and backing up the original file before making any changes.

Every bike gets a safe, professional process to ensure the best possible results from the tune. More power, smoother throttle response, and optimised performance. πŸ‘Œ

Thinking about an ECU reflash for your bike? Get in touch.

πŸ“ Race HQ – Leeds, West Yorkshire
πŸ“ž 0113 258 2319
βœ‰οΈ [email protected]

26/06/2026

πŸ’₯ Another serious machine through the Race HQ workshop!

This Kawasaki Ninja H2 is in with us for a clutch issue, but while it's apart we'll also be carrying out a full transmission inspection to make sure everything is in top condition.

On a supercharged H2, it's always worth checking beyond the obvious. We'll be inspecting the clutch pack, basket, hub and release mechanism, along with the gearbox, selector forks and gear dogs for any signs of wear or damage.

We'll keep you updated as we strip it down and show exactly what we find. πŸ‘€

What do you think the problem will be?

πŸ“ž 0113 258 2319
πŸ“§ [email protected]
🌐 www.racehq.co.uk⁠�

Well done to Jonh Marsh on his Race HQ prepared CBR600RR at Oliver’s Mount for Round 2 of the Barry Sheene Classic.🏁 Qua...
24/06/2026

Well done to Jonh Marsh on his Race HQ prepared CBR600RR at Oliver’s Mount for Round 2 of the Barry Sheene Classic.

🏁 Qualifying β€’ P7 Overall β€’ P2 Stock
πŸ₯‡ Race 1 β€’ P5 Overall β€’ P1 Stock
πŸ₯‡ Race 2 β€’ P4 Overall β€’ P1 Stock
πŸ₯‡ Race 3 β€’ P5 Overall β€’ P1 Stock
πŸ’₯ Fastest lap: 1:50.4 πŸ’₯

Not too far away from the Next Gen Supersport bikes. A little more power and he'll be right in the fight for overall wins.

The bike is now back in the workshop for preparation ahead of the Southern 100 Road Races.

21/06/2026

πŸ”₯ 170 BHP AT THE REAR WHEEL! πŸ”₯

A couple of Triumphs on the Dynojet 250i this week at Race HQ.

🏁 Triumph Tiger Sport 660
Completely stock, yet our custom ECU calibration delivered:

βœ… Increased power and torque
βœ… Smoother throttle response
βœ… Cooler running engine
βœ… Reduced fan temperatures
βœ… Improved rideability

🏁 Triumph Speed Triple 1200 RS

Fitted with a link pipe and silencer while retaining the catalytic converter, this machine produced just shy of πŸ’₯170 bhp at the rear wheelπŸ’₯.

Every bike receives an individual custom map tailored to its exact specification, giving maximum performance and rideability.

Which one would you take? The Tiger 660 or the 1200 RS? πŸ‘‡

πŸ“ž 0113 258 2319
πŸ“§ [email protected]
🌐 www.racehq.co.uk

🏁 Another Yamaha R6 Engine In for Refresh & Championship TuneOver the years, we've won multiple championships with our Y...
06/06/2026

🏁 Another Yamaha R6 Engine In for Refresh & Championship Tune

Over the years, we've won multiple championships with our Yamaha R6 engines, and this latest build is receiving the same attention to detail that has delivered race-winning performance time and time again.

πŸ”§ Work completed so far:

βœ… New pistons
βœ… New big-end shells
βœ… New main bearing shells
βœ… New connecting rod bolts
βœ… New oil pump
βœ… New valves and valve stem oil seals
βœ… Rear engine mount modified with a new spacer welded in place

πŸ”œ Next up:
πŸ”Ή Cylinder head porting
πŸ”Ή Head skim
πŸ”Ή Valve seats to be recut next week
πŸ”Ή Thinner head gasket to increase compression ratio
πŸ”Ή Kent cams to be dialled in for optimum performance
πŸ”ΉFlywheel removed

Built for the Pre-Injection Championship, this engine is being refreshed with reliability and outright performance in mind. All machining is carried out in-house using our mira valve seat machine and Carmec head surfacer, before final setup and tuning.

Multiple championships have been won with our Yamaha R6 engines, and we're looking forward to adding to that tally.

πŸ“ž 0113 258 2319
πŸ“§ [email protected]
🌐 www.racehq.co.uk⁠�

🏁

Address

3-6 Park Centre, Station Road
Leeds
LS185NX

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+441132582319

Website

Alerts

Be the first to know and let us send you an email when Race HQ Suspension and Dyno posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Race HQ Suspension and Dyno:

Shortcuts

Share

Category