Laserservicesolution

06/18/2026

06/17/2026

Another successful installation completed.

The Messer 10kW delivers incredible cutting speeds and impressive technology. From setup to production, this machine is built to perform. Looking forward to supporting this customer for years to come.

04/24/2026

1030 TRUMPF L46 Focus Lens Replacement

Found During Preventative Maintenance

This is exactly why we do preventative maintenance.

This wasn’t a scheduled lens replacement. The machine was still running, but the customer was noticing slight inconsistencies only after multiple sheets nothing obvious enough to raise a red flag.

During our checks, we picked up irregularities in the spot image, which led us to pull the head. That’s where we found hazing on the focus lens caused by a burnt lower protection window.

A small issue on the surface but one that builds with heat, affects cut quality, and eventually turns into real downtime if it’s missed.

We caught it early, corrected it, and kept the machine cutting the way it should.

Most problems don’t announce themselves they show up in the details.

04/13/2026

2010 Trumpf L20 CO₂ — Installed by LSS.

“Old tech”? Not quite.

Everyone says CO₂ is dead.

Reality: late-model CO₂s (2010+) still carry a lot of the same core motion and control tech you see in newer fiber systems.

We sourced this L20 from auction for under $10K, installed it, and got another customer into laser cutting without the heavy upfront investment.

Here’s what we see consistently:
• Start with a smaller CO₂
• Build work, cash flow, and confidence
• Upgrade to high-powered fiber within 1–2 years

It’s not theory it’s a proven path we’ve seen across our customer base.

If you’re trying to get into laser cutting, you don’t need to start big you need to start smart.

Call us. We’ll get you cutting.

04/11/2026

Mazak MkII CO2 Laser Preventative Maintenance Complete

Keeping this customer running with a late-model CO2 that still delivers where it matters production.

A lot of people write off CO2, but the reality is:
late CO2 machines are still strong investments and continue to cut efficiently every day when maintained properly.

This is where it matters:
preventative maintenance done right isn’t just cleaning, it’s identifying wear before failure and keeping machines in cycle.

With the right support and skilled laser engineers behind it, these systems stay productive and reliable.

That’s exactly what we do at Laser Service Solution.

03/19/2026

03/19/2026

Laser Service Solution Featured in March Issue of International Sheet Metal Review:

Why Laser Performance Is No Longer About Power Alone.

Laser Service Solution is proud to be featured in the March issue of the International Sheet Metal Review.

Modern laser cutting performance is no longer driven by kW it’s the integration of multiple technologies working together.

In this article, I break down how laser sources, beam shaping, automation, and intelligent software collectively define real cutting performance.

When these elements are properly aligned, the result is higher throughput, improved edge quality, and consistent reliability on the shop floor.

The key takeaway:
Today’s machines are not standalone tools they are fully integrated manufacturing systems. The interaction between the source, optics, motion, and automation is what ultimately determines output.

We’re seeing a clear shift in the industry:

•Beam quality and control are overtaking raw power.

•Automation is now essential for productivity.

•Software and process intelligence are driving consistency.

The shops that understand this and optimize the system as a whole are the ones achieving true uptime and production efficiency.

Click the link to read the full article:

https://lnkd.in/eEus4VqW

03/15/2026

Installation and commissioning of a TRUMPF 3040.

Where sheet metal becomes finished parts.