Race Wires Auto Electrics

Race Wires Auto Electrics Race, street & show cars
Aftermarket ecu installations
Wiring repairs & modifications

Had the guys from Delux Kustoms send in this cool Dato ute for a full rewire using a Haltech UC10, PD16 & keypad to cont...
09/09/2026

Had the guys from Delux Kustoms send in this cool Dato ute for a full rewire using a Haltech UC10, PD16 & keypad to control everything

Pazzo’s Foxbody back in to create a new main cabin harness after updating from the FuelTech FT600 & Speedwire fuse/relay...
26/08/2026

Pazzo’s Foxbody back in to create a new main cabin harness after updating from the FuelTech FT600 & Speedwire fuse/relay system to the new FT700 VCU & ECU Master PMU16
FuelTech Australia ECUMaster Australia

Gary’s blown Mustang came through to install and set up a FuelTech FT550 ECU
18/08/2026

Gary’s blown Mustang came through to install and set up a FuelTech FT550 ECU

Another full rewire for one of matt_fstgmh builds. This turbo Barra powered VH Commodore is all controlled using a Halt...
07/08/2026

Another full rewire for one of matt_fstgmh builds. This turbo Barra powered VH Commodore is all controlled using a Haltech R3 VCU, PD16, IC7 dash and keypad

Lachlan’s VS ute which we wired a Link ECU in to about 8 years ago, now with its new twin turbo Holden engine combo it c...
24/07/2026

Lachlan’s VS ute which we wired a Link ECU in to about 8 years ago, now with its new twin turbo Holden engine combo it came back through for a full rewire, reusing the Link ECU we made a full new engine harness and installed a Hardwire PDM28 for all the body electrics

Matt’s VH Group A in to change from carb to EFI using Haltech R3 and UC10 dash
23/07/2026

Matt’s VH Group A in to change from carb to EFI using Haltech R3 and UC10 dash

Another killer build sent in from Phil Progen performance and auto hosesThis blown Holden powered Torana is all controll...
30/06/2026

Another killer build sent in from Phil Progen performance and auto hoses
This blown Holden powered Torana is all controlled using a FuelTech FT600 and ECU Master PMU

Zach’s LS3 powered GQ Patrol all rewired using a Haltech Nexus R5, PD16, UC-10 dash and keypad haltech
17/06/2026

Zach’s LS3 powered GQ Patrol all rewired using a Haltech Nexus R5, PD16, UC-10 dash and keypad haltech

UCSMOKE came in for few patch ups once again though after so many changes and modifications over the years making it int...
03/06/2026

UCSMOKE came in for few patch ups once again though after so many changes and modifications over the years making it into a mess we decided to start again, now using a ECUMaster Australia PMU16 to control the car along with a new engine harness for the FuelTech Australia ECU

Another drift car rewire sent in from the guys at autostattautomotive, all controlled by haltechHaltech Nexus R5, PD16,U...
02/06/2026

Another drift car rewire sent in from the guys at autostattautomotive, all controlled by haltech
Haltech Nexus R5, PD16,UC-10 dash & 3x5 keypad

Address

Pakenham, VIC
3000

Telephone

+61407257079

Website

Alerts

Be the first to know and let us send you an email when Race Wires Auto Electrics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Race Wires Auto Electrics:

Shortcuts

Share

Category