Semi-Pro Motorsport

Semi-Pro Motorsport Motorsport and Street Car
Education and Entertainment

09/03/2025

There are way too many jerks in the motorsport community. Don't be a jerk

Racer Industries Sparco

25/02/2025

Tyres are our maintain contact point with the road and this is how you can learn to use them better

We just did the first proper mods to the Sedan to compliment the Bremtec Evolve F2R Rotors and Project Mu Club Racer pad...
20/02/2025

We just did the first proper mods to the Sedan to compliment the Bremtec Evolve F2R Rotors and Project Mu Club Racer pads.

We have moved to Shockworks coilovers with 9kg front 12kg rear.

The front now has Weds TC105X from Import Monster in 18x9.5+39 in Nankang CRS V2 265/35r18 and our old 18x8.5 +45 Weds TC105X in Nankang CRS 245/40r18

Alignment specs in the photos thanks to Keith 4 Wheels for sorting it out

18/02/2025

This is probably the most common mistake we see when people are installing coilovers.

How to set travels

Photo courtesy of Matthew Tregear & Cookie's PhotographyN Australia put on another amazing N Festival. We took our two c...
10/12/2024

Photo courtesy of Matthew Tregear & Cookie's Photography

N Australia put on another amazing N Festival. We took our two cars. Ellie's i20N and our i30 Sedan N. It was great seeing so many enthusiasts out together.

The i30 Sedan N and i20N were both right up the pointy end but the i30 was a rocket. 1:25.9 out of a "stock" sedan N. Cherry Tuning & Performance removed the octane learning as we were struggling to get laps in without it. We haven't seen anything else get close to that time at least not with rego plates.

The Sedan had Project-Mu Australia HC+ brake pads fitted along with Bremtec F2R 2 Piece Rotors. The car never had fade throughout any of the sessions. As well as Weds TC105X from Import Monster and Yokohama Tyre Australia Advan A052

We have been working with Keith 4 Wheels (Juan does a heap of our work) for an alignment on the factory suspension that we are happy with. I think we are now at that point. Next we will be throwing in some camber bolts before coilovers go in and we look at doing bushes and arms.

The i20N we were less happy with. It will be going up on the setup patch for a check over and alignment along with some basic maintenance work carried out (Keith 4 Wheels did not do this work). It's had a hard 3 years of abuse. it did a 1:28.3 in the peak of the heat on Friday with traffic but it wasn't a comfortable car to drive and should be well into the 25s.

Cherry's tune on the i20N made a world of difference over the Racechip (which was still pretty good) Mid range power and throttle response were greatly improved. Can't wait to get the bigger turbo back on.

We also had another customer car out. N Mode had its first track outing and performed well minus some teething issues which will be fixed over the Christmas break.

It has been a Labour of love for many years by two friends in their backyard garage. The car was flogged by Luke King (Carrera Cup Driver), Eleanor Terry, Andrew Price, Dalton Ellery and the owner and did not miss a beat.

This will be one very fast car when it is all done.

Thank you to all the Nthusiasts that made the weekend a pleasure.

Pre N Fest goodies for a number of Hyundai customersKirksWorks Race Service corner weighted and string aligned our custo...
03/11/2024

Pre N Fest goodies for a number of Hyundai customers

KirksWorks Race Service corner weighted and string aligned our customers PFL i30N. We have slots available before N Fest for alignments and servicing by Motorsport professionals.

We also had a few orders late last week of Project-Mu Australia pads and Bremtec Rotors so hand delivered them out to customers over the weekend.

New product launch! I30 Sedan N, Kona N and Facelift i30N Bremtec 2 piece rotors and new Project Mu HC+ brake pads for t...
31/10/2024

New product launch! I30 Sedan N, Kona N and Facelift i30N Bremtec 2 piece rotors and new Project Mu HC+ brake pads for the entire N range.

Bremtec Evolve 2 piece rotors
- Floating Rotor
- lighter than OEM Unsprung rotational mass reduced
- Reduced Thermal Judder
- High Carbon content

Project Mu HC+
- Street Track capable
- works from cold
- 0-800 degrees Celsius
- Hyper Carbon compound
- .43 - .58mu friction co-efficient

:D
28/07/2024

:D

Address

Commerce Cirt, Yatala
Gold Coast, QLD
4207

Telephone

+61431627841

Website

Alerts

Be the first to know and let us send you an email when Semi-Pro Motorsport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category