Syncro Vehicle Storage Systems

08/10/2026

APEX ELECTRICAL AND COMMUNICATIONS. TOYOTA HIACE.

An electrician’s fitout set up so bench work happens at the van rather than back at the workshop. The drop down vice mounts off the rear above the towbar step, with racking down both sides holding pull out carry cases, container rows and flat containers with dividers behind a cargo barrier with air curtain infill.

- Drop down vice with rear towbar step
- Driver side racking, pull out carry cases and small container rows
- Passenger side shelving, flat containers with dividers
- Cargo barrier with air curtain infill
- Roof rack with double rollers and conduit pipe
- 17mm anti-slip plywood flooring

Built for bench work on site.

05/10/2026

THANKS FRANK.

First van fitout, set up around the gear he carries every day and adjusted after install to suit how he actually works.

05/10/2026

OVEN FIXER. FORD TRANSIT CUSTOM.

A repair van set up so every small part is visible before the job starts. Syncro shelving units run through the load area with dividers on every shelf, topped with transparent tilt-out compartment boxes that put fittings and spares in view and in reach with one movement.

- Syncro shelving with shelf dividers
- Transparent tilt-out compartment boxes in small and large formats
- Tilt action keeps contents visible without opening a drawer
- Engineered in Italy, fitted locally

Built for fast parts access on service calls.

02/10/2026

FREEZE BREEZE. LDV DELIVER 9.

An air conditioning service van set up for cable work and fast parts access on the road. The floor runs 17mm anti-slip plywood, with Syncro shelving down one side and an extendable top shelf tray for the longer gear. A cable reel holder mounted on Syncro cable poles keeps the reels feeding cleanly, and the silicone, can and cable holders hold the consumables in place rather than loose in the load space.

• 17mm anti-slip plywood flooring
• Syncro shelving with extendable top shelf tray
• Cable reel holder on Syncro cable poles
• Silicone holder, can holder and cable holder
• Engineered in Italy, sized to the Deliver 9

Built for cable work on the move.

22/09/2026

OFFICE CLOSED TODAY.

Our Campbellfield office and workshop are closed today between 10:30am and 1:30pm. We are open as usual either side of those hours. Send your enquiry or quote request through any time.

📞 03 9357 6780
🌐

Syncro offers Reliable Custom Tradie Van Fitouts in Melbourne. We are one-stop shop for Commercial Van Fitouts tailored to your business needs. Call us.

11/09/2026

SECURE DRAWERS THAT LOCK THEMSELVES.

Every Syncro drawer snap-locks the moment it closes and opens with the lever built into the handle. Ball bearing telescopic slides give a smooth, silent glide at full extension, loaded or empty. No rattle on the road, no drawers creeping open under brakes.

- Automatic snap-lock closure with pull-out stop
- Ball bearing telescopic slides, full extension access
- Load rated up to 140kg per drawer
- Lockable fronts and aluminium dividers available
- Engineered in Italy, sized to your van

Built for gear that stays put.

07/09/2026

FIREMASTER FIRE PROTECTION

🔥🚨

04/09/2026

HYUNDAI ILOAD ELECTRICAL FITOUT

Hyundai iLoad fitout built for electrical work. Underfloor drawer unit with a sub, paired with basic racking on the driver's side. Dual access from inside the van and from the driver's side door for quick reach on site.

- Underfloor drawer unit
- Sub drawer
- Basic racking, driver's side
- Internal access
- Driver's side external access

Built for fast access on site.

29/07/2026

Thanks Sean!

29/07/2026

FIRE MASTER

Hyundai Staria Load fitout built for fire safety servicing. 17mm anti-slip flooring with full shelving and a range of storage containers, plus an extendable top shelf tray for quick access to equipment.

- 17mm anti-slip flooring
- Shelving throughout
- Variety of storage containers
- Extendable top shelf tray

Built for organised fire safety work.