Aer-o-cure

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Aer-o-cure, Automotive Service, 8 Lees St, Wynberg, Johannesburg.

31/10/2025

Aer-o-cures latest state of the art installation for the newest edition to the Bluespec Group - Renew-it Truck Centre.

Aer-o-cure manufactured paint shop featuring 4 truck Spray Booths with integrated mixing room.

Aer-o-cure manufactured preparation system.

Aer-o-cure supplied and installed compressed air network.

Aer-o-cure supplied high pressure wash plant.

Josam from Sweden, Cab and Chassis straightening system installed by Aer-o-cure.

Beeline from USA, Truck and Trailer Chassis straightening imported and installed by Aer-o-cure.

GYS from France, featuring supply of latest technology of welding and workshop equipment.

Contact Aer-o-cure for all truck repair requirements.

Aer-o-cure, manufactured in South Africa.
8 Lees str, Wynberg. Gauteng
[email protected]

23/10/2023

Aer-o-cure's TRIPPLE 12,5m Combination Downdraught Spray Booth Ovens

Custom built solution to accommodate three production paint lines with an overhead gantry crane.

Each booth is 12,5m long, 5m high, 5m wide.

Air Inlet handling units placed on top of the booth using gas burners to provide the required fresh air at the correct temperature for the paint application and baking processes.

All solutions are manufactured in Wynberg, Johannesburg and featuring the latest energy efficient technology available.

Contact Aer-o-cure for your paint application solution.
Manufactured in South Africa for Africa.
Energy Efficient and Fully Compliant.

Call +271114446454

[email protected]

www.aerocure.co.za

Services Provided:
Spray Booth Certificates (6 Monthly)
Spray booth service and maintenance (6 Monthly)
Compressor Service (Annual or hourly based)
Vehicle Lift Maintenance certificates (6 Monthly)
Maintenance Contracts
Work flow planning and design
Fire Approval Consultation
Emergency Services Bylaw Compliance

Solutions Provided:
Major Structural Automotive Repair Shop
Minor Structural Automotive Repair Shop
OEM Approved Equipment
Insurance Approved Solutions
Detailing Bays
Smart Repair
Mag Rim Repair
Industrial Paint Lines

09/02/2023

Aer-o-cure's 18m Combination Downdraught Spraybooth Oven.

Built for production with high performance ensuring perfect paint application and curing everytime.

Contact Aer-o-cure for your paint application solution.
Manufactured in South Africa for Africa.
Energy Efficient and Fully Compliant.

Call +271114446454

[email protected]

www.aerocure.co.za

20/01/2023

Another happy client in Malawi!
Aer-o-cure Spraybooths are manufactured in South Africa and available with instalation throughout Africa.

Contact Aer-o-cure, [email protected] for your solution today.

07/11/2022

Congratulations to Anton and his team at J&H Panel Beaters in White River.
Thank you for choosing Aer-o-cure to be part of your success.

J&H Panel Beaters, built a new stater of the art 2100 sqm Bodyshop including the following equipment designed and manufactured by Aer-o-cure in Johannesburg;;

Aer-o-cure downdraught spray booth combination baking oven using LPG gas burners.
Aer-o-cure mixing room,
Aer-o-cure preparation bays,
Aer-o-cure overhead intelligent infra red curing lights,
Aer-o-vac centralised vacuum system for dry sanding with 6m swing arm workstations
Wash bay masking area prior to spray booth featuring WAP HP Cleaner.
All equipment installed features latest energy saving technology including variable speed drives and LED lighting.

For your turnkey solution, please contact Aer-o-cure at [email protected] or call 011 444 6454

30/08/2021

A brilliant success story of a family owned business, Dentco in Middleburg, South Africa.
They invested into a shop upgrade with Aer-o-cure spraybooth and preparation system.
Within several months, Dentco received majority of OEM and insurance approvals and most importantly increased both quality and efficiency of repairs.

Contact Aer-o-cure for all your body shop equipment requirements.
[email protected]
Or
+27114446454

18/07/2021

Full Turnkey Bodyshop Installation in Bedfordview, Johannesburg.

Looking for a Spraybooth or establish a full paint line, contact Aer-o-cure (Pty) Ltd

19/04/2021

Looking to setup a well organised and efficient bodyshop?
Contact Aer-o-cure for a complete turnkey solution.
With over 30 years of experience, designed and manufactured in South Africa for Africa.
Design / Manufacture / Install / Support
🇿🇦🇿🇦👌

01/04/2021

Aer-o-cure customised installation of three combination down draught spraybooth baking ovens with interleading paint mixing room.
AC90-3400 EPA for light commercial vehicles like Sprinter and Crafter LCV.

Www.aerocure.co.za

06/02/2021

Powerful and complete.

GYS Inverter Spot welder
VAS 821 101 with VAS 821 105 C-clamp kit.

GYS Inverter Mig/Mag Welder
VAS 821 005
Ready to immediately weld steel, brazing or aluminium in the bodyshop with the three torch Synchro pulse Technology.

23/10/2020

Are you in Automotive Repair?
or
Looking to Start a New Business in Automotive Repair?

Setting up a bodyshop, new or existing, to perform vehicle repairs efficiently on any scale is not an easy task for even an experienced professional in the repair industry.

Aer-o-cure has over 30 years of experience in setting up successful bodyshops for vehicle repairs.

Aer-o-cure manufactures locally in Johannesburg and utilises its own installation and service technicians.

Our services include:
• Consultation on type of shop required based on various objectives and ensuring correct equipment is specified.
• Layout design ensuring efficiency in every aspect, including but not limited too, maximising equipment utilisation and staff efficiency.
• Handle the entire project from planning, civil works contracting, manufacturing of equipment, delivery, installation to final commission and training.

Types of automotive repair concepts:
• SMART Repair -
Cosmetic repairs including Paintless Dent Repair (PDR), Small paint repairs, plastic repairs, interior repairs - Perfect for mobile, dealership, detailer, carwash or as a standalone service.

• Speed Body Shop
- Bolt on / panel repair, non structural panelshop.

•Major or Minor Structural Bodyshop
-Complete turnkey solutions to repair any vehicle type damage to OEM standards for insured and non insured vehicles

• Mag Wheel Repair
- Complete turnkey alloy wheel repair solutions.
- Mobile | Dealership | Tire Shop | Panelshop

Like this post and we will keep you up to date with ideas and concepts related to automotive repair.

If you are ready to purchase or looking to purchase soon, please send us a message with your mobile number and email address. We will call you to determine your requirements and quote accordingly.

For further information, please call us on 011 444 6454 or email us [email protected]

Address

8 Lees St, Wynberg
Johannesburg
2090

Telephone

+27 11 444 6454

Website

http://aerocure.co.za/

Alerts

Be the first to know and let us send you an email when Aer-o-cure posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Aer-o-cure:

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Johannesburg?