Hydro-Gas Couplings HYCO

Hydro-Gas Couplings HYCO Suppliers of Grease and Oil Pumps manual and pneumatic as well as accessories i.e. grease ni***es, oilers, grease cartridges

Trade Names

HYCO
LUBECONSULT

Hydro- Gas Coupling was established in 1963 and manufacturers the following:

Pneumatic Lubrication Equipment:
Grease Pumps
Roller Carts
Hose Reels
Heavy Duty
Medium Duty
Pneumatic Oil Pumps
Hose Master High Pressure Cleaning Equipment


Manual Lubrication Equipment
Field Greasers
Bucket Pumps
Foot Operated pumps
Knapsack compressors
Hand lever grease guns
Manual Dr

um Pumps
Semi Rotary
“T” Handle
Full Rotary
Gear Oil Dispensers
Oil Dispenser Trolley
Roller cart 210l/180 kg
Quick Couplings
Accessories
Grease ni***es
Grease Cups
Flow Meters
Oil cans
Oil guns
Oil level gauges
Decanters steel & plastic
Easy out tools

62 years old today Thank you to our customers, suppliers and staff that have made this possible Hydro-Gas Couplings HYCO
26/06/2025

62 years old today
Thank you to our customers, suppliers and staff that have made this possible Hydro-Gas Couplings HYCO

Grease ni**le caps. Red, Blue, Green but the prettiest of all YELLOW
19/03/2025

Grease ni**le caps. Red, Blue, Green but the prettiest of all YELLOW

HYCO Flow Meters
18/02/2025

HYCO Flow Meters

Hyco RollercartsPneumatic grease pumps are mounted in Hyco roller carts for acceptance of conventional grease drums of 1...
18/02/2025

Hyco Rollercarts
Pneumatic grease pumps are mounted in Hyco roller carts for acceptance of conventional grease drums of 15 and 50kg capacity. 180kg rollercart also available. Top/drum section fits over standard grease drums and is attached to trolley section by three fasteners. Rollercarts can be supplied without pumps.
Pumps are supplied with drawings and parts lists. Replacement parts and service are readily available.
Made in RSA.

Hyco high-pressure, heavy-duty grease pumps.Pressure ratio 50:1Also available 75:1 ratioStandard equipment a) air motor ...
18/02/2025

Hyco high-pressure, heavy-duty grease pumps.
Pressure ratio 50:1
Also available 75:1 ratio

Standard equipment
a) air motor
b) high pressure delivery hose 9,6 mm x 2 m and fittings
c) grease control handle z-swivel.
d) grease pump section.
e) automatic oiler
f) quick release air coupling and insert.

Air Consumption 0, 34 m3/min
Specials
Enquiries are invited for supply of Hyco grease pumps differing from the above standard specifications (e.g. for higher pressures, higher grease volumes, etc.).

Hyco grease cupsFeatures• Grease cups provide one of the most reliable, safest, and favourable means of lubricating.• a ...
18/02/2025

Hyco grease cups
Features
• Grease cups provide one of the most reliable, safest, and favourable means of lubricating.
• a variety of available sizes from 2.2-50cm3
• quality of workmanship and tolerances ensure high lubrication pressures.
• grease is easily absorbed by the bearing on demand.
• manufactured from sheet metal protected against corrosion.
• available in 1/8BSP & 1/4BSP

GREASE CUP SIZES AVAILABLE
NUMBER 1 1/8” BSP GREASE CUPS
NUMBER 2 1/8” BSP GREASE CUPS
NUMBER 3 ¼” BSP GREASE CUPS
NUMBER 4 ¼” BSP GREASE CUPS
NUMBER 5 ¼” BSP GREASE CUPS
NUMBER 6 ¼” BSP GREASE CUPS

HYCO Stainless Steel Grease Ni***es 303 & 316Contact Hyco for grease ni***es which we provide in stainless steel. The st...
18/02/2025

HYCO Stainless Steel Grease Ni***es 303 & 316
Contact Hyco for grease ni***es which we provide in stainless steel.
The stainless-steel grades we most commonly supply is Grade 303 (V2A)
Grade 316L (V4A). Is also available on request.
These stainless-steel grease ni***es are more resistant to corrosion.
The product’s durability adds to its cost effectiveness as you will not require to replace as often as standard galvanized steel.

How to fill a Hyco 2005 Hand Lever Grease Pump1. Unscrew the nozzle cap from the grease gun and pull the handle on the b...
18/02/2025

How to fill a Hyco 2005 Hand Lever Grease Pump

1. Unscrew the nozzle cap from the grease gun and pull the handle on the barrel out until it locks into place. Slide the old grease cartridge out of the barrel.
2. Remove the plastic cap from the new grease cartridge and slide that end into the gun’s barrel. Peel off the metal tab on the other end of the grease cartridge.
3. Screw the grease gun’s nozzle back onto the barrel and push the handle back in. Pump the nozzle’s trigger to prime the grease gun and remove air pockets.
4. Grease guns should be stored horizontally to avoid problems:
 You don't want to overexert the spring and plunger, as this will cause the grease gun to wear quicker and change the amount of lubricant it exerts on each pump.

Hyco 2005 and 2012 hand lever grease gun
400cc grease cartridges for 2005 filled or unfilled available

Hyco 2009 gear oil dispensersFeatures:• Adjustable rotary action for controlled delivery • Smooth operation combined wit...
18/02/2025

Hyco 2009 gear oil dispensers

Features:
• Adjustable rotary action for controlled delivery
• Smooth operation combined with positive displacement.
• Sturdy construction and pleasing design
• Handles from the lightest to the heaviest gear oils.
• Capacity 15 litres
• 1,5m long delivery hose with bent tip nozzle
• Output maximum 2.5 turns = 350ml

We repair g guns - contact us for a quote
18/02/2025

We repair g guns - contact us for a quote

Address

41 Kabeljou Road
Germiston
1428

Alerts

Be the first to know and let us send you an email when Hydro-Gas Couplings HYCO posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share