The Plug Leads Guy

The Plug Leads Guy Creating a Custom, Tailored Ignition Solution for your ride! Supplier of Custom MSD & Moroso leads

01/10/2026

JJ Brown previously had a set of leads made up his 1UZ setup. After a pin had snapped off, he ordered another set, instead of having the single lead repaired, as he needed a set urgently for that weekend.

JJ sent me the lead lengths & I threw together another set of MSD 8.5mm Super Conductor leads for him.

Checkout pics & let me know what you think!

Should you wish to have a set of leads made up for your setup, don't hesitate to call/WhatsApp 0738974488 & I will gladly asssist!

Stay tuned for more updates!

Cheers for now!
#

27/09/2026

Hey everyone

Hope that you guys are enjoying the weekend.

Today I have a very special car...this one being waaaaaay older than me...Oom André took a deive to me all the way from Paarl with his stunning 1947 Citroën Traction Avant B11.

I built the initial set of measurements received, but the wires were making contact with the gearbox shift rods....yes, this vehicle is a FWD.

Check out the engine bay pics, I managed to build the leads so that none of the leads made contact with the rods anymore.

Thanks Oom André for entrusting me with the making leads on this beautiful classic. Glad that I could get it sorted for you.

Check the startup video in the comments.

Should you wish to have a set of leads built for your car, classic, modern, race or street...don't hesitate to call/WhatsApp 0738974488 & I will gladly assiat!

Have an awesome week everyone.

Cheers for now!


Hey everyoneHope that you guys are enjoying the weekend.Today I have a very special car...this one being waaaaaay older ...
27/09/2026

Hey everyone

Hope that you guys are enjoying the weekend.

Today I have a very special car...this one being waaaaaay older than me...Oom André took a deive to me all the way from Paarl with his stunning 1947 Citroën Traction Avant B11.

I built the initial set of measurements received, but the wires were making contact with the gearbox shift rods....yes, this vehicle is a FWD.

Check out the engine bay pics, I managed to build the leads so that none of the leads made contact with the rods anymore.

Thanks Oom André for entrusting me with the making leads on this beautiful classic. Glad that I could get it sorted for you.

Check the startup video in the comments.

Should you wish to have a set of leads built for your car, classic, modern, race or street...don't hesitate to call/WhatsApp 0738974488 & I will gladly assiat!

Have an awesome week everyone.

Cheers for now!


Hey guysBeen a bit quiet up in here...but for good reason, I've been blessed with many orders & been quite busy.Happy to...
19/09/2026

Hey guys

Been a bit quiet up in here...but for good reason, I've been blessed with many orders & been quite busy.

Happy to share this post with you...WB Van Niekerk contacted me all the way from Molopane, Limpopo.

He explained that he has a really big race & was aiming to improve on his previous season's result. He contacted me on 31 August & I built the leads that same evening & arranged courier the next day.

The big race was on 5 September at Ultimate Raceway in Vereeniging & WB let me know that the car ran perfectly!

WB van Niekerk finished ZA2 meaning that he finished 2nd in SA...pretty epic achievement sir! Well done 👏🏽

For all your ignition needs, don't hesitate to call/WhatsApp 0738974488 & let's get that spark sorted! ⚡️⚡️⚡️

Thanks for the support WB van Niekerk!

Hopefully you get ZA1 next season! 🙌🏽

Enjoy the rest of the weekend peeps!

Cheers for now!


#1660

It's that time again!We will be hosting chef Warren & the team from King's Gourmet Kitchen Pull through this evening, 27...
27/08/2026

It's that time again!

We will be hosting chef Warren & the team from King's Gourmet Kitchen

Pull through this evening, 27 Aug 2026 & come & experience the culinary excellence

Pricing is as follows:
Burger R85
Burger and Shake R120
Chefs Special R130
Fries R20
Shake R40

Pop up address:
130 Groenewoud Street, Sonkring, Brackenfell

Pull through, have a chat & grab some awesome food!

See you there

Good evening everyone!Hope that you all had an awesome week & you are enjoying the weekend!Today we have Ruan's Mk1...Ru...
16/08/2026

Good evening everyone!

Hope that you all had an awesome week & you are enjoying the weekend!

Today we have Ruan's Mk1...Ruan contacted me all the way from a town in the Western Cape called Groot Brak Revier, for those that don't know, it's located on the N2 between Mossel Bay & George. Ruan requested a set of leads for his 2.0 8v setup, a set that I build quite often & yields great results & Ruan's setup benefitted just like the rest!

Checkout the pics that Ruan sent me as well as his feedback! 🤓💪🏾⚡️

Thanks very much for the support & the great feedback Ruan! Enjoy the leads & all the benefits from the improved spark!

Should you wish to purchase a set for your daily, project, race car or any setup you might be running, don't hesitate to call/WhatsApp 0738974488 & let discuss a setup that'll work for you!

Have an epic week!

Cheers for now!


Good evening Peeps!Contemplating what that next mod is going to be?My proposition is simple, yet without it all the mods...
10/08/2026

Good evening Peeps!

Contemplating what that next mod is going to be?

My proposition is simple, yet without it all the mods you do will be pointless...an absolutely critical part of the combustion equation...you need an air/fuel mix, you need compression & then you need combustion...we are quick to add the air/fuel mix & up the comp, through high comp pistons or adding boost, which forces more air/fuel into the cylinders...but we need an ignition source & that's where I come in...if you want to make sure that your spark never falls short, then let's chat about an ignition system that will deliver, all day, everyday!

Craig needed an upgrade, his setup...an old school Toyota 2T setup, but upgraded with a set of throttles, converted to fuel injection & running a Golf 4 Tower coil.

I hooked him up with a set of MSD 8.5mm Super Conductor leads, built according to his specs & the car is running perfectly 👌🏽⚡️💪🏾

Thanks for the support Craig!

Should you wish to tick off the Ignition in your power making equation, then give me a shout & let's make sure that the spark is never in doubt!

Call/WhatsApp 0738974488

Cheers for now & have an epic week!


10/08/2026

Good evening Peeps!

Contemplating what that next mod is going to be?

My proposition is simple, yet without it all the mods you do will be pointless...an absolutely critical part of the combustion equation...you need an air/fuel mix, you need compression & then you need combustion...we are quick to add the air/fuel mix & up the comp, through high comp pistons or adding boost, which forces more air/fuel into the cylinders...but we need an ignition source & that's where I come in...if you want to make sure that your spark never falls short, then let's chat about an ignition system that will deliver, all day, everyday!

Craig needed an upgrade, his setup...an old school Toyota 2T setup, but upgraded with a set of throttles, converted to fuel injection & running a Golf 4 Tower coil.

I hooked him up with a set of MSD 8.5mm Super Conductor leads, built according to his specs & the car is running perfectly 👌🏽⚡️💪🏾

Thanks for the support Craig!

Should you wish to tick off the Ignition in your power making equation, then give me a shout & let's make sure that the spark is never in doubt!

Call/WhatsApp 0738974488

Cheers for now & have an epic week!


Hey peeps!Hope that you guys are well & had a productive week!Today I present to you one of the top runners in the Nitro...
01/08/2026

Hey peeps!

Hope that you guys are well & had a productive week!

Today I present to you one of the top runners in the Nitro R32 Golfs... Farhad from Rojan Engines & tuned by ERF Racing.

Farhad requested a set of MSD 8.5mm Super Conductor leads when he upgraded to set of IGN1A smart coils

Farhad run a best time of 10.3s to date & I am looking forward to seeing this setup crack the 9s!

Thanks again for the support Farhad!

For a set of leads that'll help you ignite those special fuel mixes, you know who can make it happen...don't hesitate to call/WhatsApp 0738974488 & let's get that ignition setup sorted!

Have an epic weekend everyone!

Cheers for now!

Address

Cape Town
7650

Telephone

+27738974488

Website

Alerts

Be the first to know and let us send you an email when The Plug Leads Guy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Plug Leads Guy:

Shortcuts

Share