Xado Service

Xado Service Official application and retail centre of all Xado products.

We also perform all vehicle services including:
Minor and major services
Full diagnostics
Testing of the brakes for performance issues
Clutch and gearbox repair
Suspension testing

Merry Merry Christmas - Среќен Божиќ - Срећан Божић - Sretan Božić - Frohe Weihnachten - Buon Natale - Joyeux Noël - Ges...
24/12/2020

Merry Merry Christmas - Среќен Божиќ - Срећан Божић - Sretan Božić - Frohe Weihnachten - Buon Natale - Joyeux Noël - Geseënde Kersfees - Gëzuar Krishtlindjet - عيد ميلاد مجيد - Շնորհավոր Սուրբ Ծնունդ: - З Калядамі - Весела Коледа - 圣诞节快乐 - Veselé Vánoce - Glædelig jul - Gelukkig Kerstfeest - Gaja Christmas - Häid Jõule - Maligayang Pasko - Hyvää Joulua - შობა - Jwayeu Nwèl - חג המולד שמח - Boldog Karácsonyt - Gleðileg Jól - メリークリスマス - 메리 크리스마스 - Hilarior Christmas - Priecīgus Ziemassvētkus - Linksmų Kalėdų - God Jul - Wesołych Świąt - Crăciun fericit - С Рождеством - Veselé Vianoce - Vesel Božič - ¡Feliz Navidad - God Jul - Mutlu Noeller - З Різдвом - לעבעדיק ניטל - llawen nadolig - giáng sinh vui vẻ

20/10/2019

Revitalized - Audi A3 1.4L applied:
XADO AMC Maximum engine wear protection additive:
The right choice when it comes to the wear protection of internal combustion engines with an oil volume up to 5L.

https://www.xado.co.za/collections/automobiles/products/xado-1-stage-maximum-atomic-metal-conditioner

Do you need that? Unfortunately, there is still the misconception that "good oil" and "short" change intervals are sufficient for the longest possible engine life. Shorter oil change intervals are good, but even the best engine oil is unable to stop the inexorable process of friction wear. Already from the first starting of the engine the wear begins by abrasion while the metal surfaces rub against each other.
The XADO Revitalizant, which is highly concentrated in our AMC Maximum product, rebuilds worn metal surfaces by forming a metal-ceramic surface layer. The formation of this metal-ceramic surface layer is a physico-chemical process in which special silicate atoms combine with the metal atoms of the friction surfaces to create a completely new surface. Not only is this new metal-ceramic surface harder than the original metal alloy of the engine parts, it also has significantly less roughness resulting in less wear and lower working temperatures.
The build-up process of the metal-ceramic surface layer takes place only at the places where high temperatures and pressures occur due to friction.

17/09/2019

- PRESS RELEASE -

MARX READY FOR CLOSE AND TIGHT ACTION AS MOBIL 1 V8 SUPERCARS HEAD TO PORT ELIZABETH

Antonie Marx will be making his maiden coastal appearance in Round 5 of the 2019 Mobil 1 V8 Supercars.

The September 20-21 race weekend will see the series making their first visit to the Aldo Scribante Racetrack since the 2012 season and Marx is looking forward to the experience.

“We know they love their V8 racing down in the Eastern Cape so the support should definitely be great there. Quite a few of us have never competed at the circuit so this will be a new experience for us” says Marx.

Following Round 4, the Tinco Garage Motorsport team have been working hard to get the XADO Jaguar ready for the upcoming round. “It’s been a tough battle thus far, but also a very rewarding one. We already know that success in this championship does not come easy, but we’ve taken a lot from our Kyalami Grand Prix Circuit weekend to build on; notably our superb start in Race 1.”

The Aldo Scribante Racetrack might however level the playing entirely. “This circuit is really unlike any other venue that we are racing at. Although the Aldo Scribante Racetrack is slightly longer than Zwartkops Raceway, you have less straights to work with. The races will be won or lost in the corners. You have slow hairpins, faster sweeps and chicane to contend with. Overtaking may be difficult, but not impossible. The key will be to make a good start and emerge in a good position following the first two corners. From there you may be able to control the pace and racing line.”

Friday will see three practice sessions ahead of Saturday morning’s Qualifying session at 09:30. The two races will both be contested over 12 laps and are scheduled to start at 12:30 and 16:30. There will also be a fan walk at the Hanger section of the circuit at 11:55.

Fans of Marx are also invited to follow his page www.facebook.com/AntonieMarxRacing for results and updates

Marx would like to thank Xado Smart Nanotechnology, TiNCo Motorsport, Strado Truck & Trailer Remanufacturers, Union Propshafts, SAX Shocks, Deysels Autobody, FS Car Breakers, B&J Supplies and Mag Repairs for making his 2019 season possible.

Work in progress... Soon opening 🥂
05/04/2019

Work in progress... Soon opening 🥂

Address

13, 1st Road, Bardene
Boksburg
1459

Opening Hours

Monday 07:00 - 17:00
Tuesday 07:00 - 17:00
Wednesday 07:00 - 17:00
Thursday 07:00 - 17:00
Friday 07:00 - 17:00
Saturday 07:00 - 17:00

Telephone

+27738682782

Alerts

Be the first to know and let us send you an email when Xado Service posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Xado Service:

Share