Factory Flori Racing

Factory Flori Racing Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Factory Flori Racing, Motorcycle repair centre, Woonsocket, RI.

01/01/2026

Happy New Year to all the friends, family and customers. Out with 2025 and bring on 2026!

Just because you see grease doesn’t mean it’s done correctly. Greasing a bike is the best money spent as it helps extend...
11/29/2025

Just because you see grease doesn’t mean it’s done correctly. Greasing a bike is the best money spent as it helps extend the life of every bearing. Re greasing is also important but only if done correctly. That means removing the needle bearings, cleaning and regreasing. If you need any service to your bike now’s the time. Don’t wait till the spring. From graphics to all out motor builds and Dyno tuning. We got you covered.

Just because riding season is almost over doesn’t mean you have to neglect the bike. Perfect time to prep the bike for w...
11/12/2025

Just because riding season is almost over doesn’t mean you have to neglect the bike. Perfect time to prep the bike for winter hibernation!

Chassis grease
Fluid changes
Engine rebuilds
Graphics / plastics
Full builds
Restorations
V***r blasting

Reach out for appointments

Little project I’ve been working on. 1995 CR250. B kit suspension, all new bearings, every piece v***r blasted, new hoop...
10/31/2025

Little project I’ve been working on. 1995 CR250. B kit suspension, all new bearings, every piece v***r blasted, new hoops/spokes, powder coated frame etc etc. all it needs is a nice set of pegs.
If you need any:
-V***r blasting
-restorations
-full builds
-bike preps
-rebuilds
Feel free to contact.

Busy couple weeks as the bikes roll in and out…Full teardown on 24 husky 250 and 350. Strip, powder coat both frames whi...
01/25/2025

Busy couple weeks as the bikes roll in and out…

Full teardown on 24 husky 250 and 350. Strip, powder coat both frames white, fresh topends including manual cam chain tensioners, full suspension service and new parts along the way. Ready for race season.

Little bikes need love too, full suspension service on husky TC50 and EE50, new kick starter gears and springs installed in a 24 tc50, and fresh top end, counter shaft seal and grease on another TC50.

Finished a full bearing replacement, sprockets/chain, chain sliders, oil change etc on a kx450 to get ready for the warm weather.

Finally..top end on a 24 crf250r and custom Dyno tune to optimize power. Also decided to wrap the forks in black vinyl to give it a different look.

Also got 3 new sets of wheels to install tires on, and 3 other sets to swap tires.

Still have more bikes and projects lined up. Don’t wait till the last minute to have your bike ready to ride.

Been busy prepping bikes. Topends to full grease was the topic this week. More v***r blasting fun. 24 Husky 250f topend,...
01/11/2025

Been busy prepping bikes. Topends to full grease was the topic this week. More v***r blasting fun. 24 Husky 250f topend, Husky tc65 topend and grease, and full grease on a 23 yz250f including new steering head bearings and races. Whatever you need done we can handle it. Book now before the season starts.

01/01/2025

Starting off the New Year right with our first rider spotlight for 2025! Our January rider spotlight is focused on Gary Reagan!


-What does 508 mean to you?
508Intl is my favorite spot to clear my head, rip some laps, and have a great time. It’s where I get my Throttle Therapy.

-How did you initially hear about 508?
I took a long break from riding, and when I was getting back into it, Jay Austin and Keith Taylor invited me to join them at 508.

-What’s your favorite thing about 508?
My favorite thing about 508Intl is the incredible track layout and perfect conditions every time. On top of that, Russ, Liz, and the entire staff always treat us like family.

-What is your most memorable riding/racing experience?
I will never forget my first holeshot on a Honda CR80 at Capeway Rovers. There is no better feeling than sitting on the starting gate, bar to bar, and then exiting the first turn to find a clear track ahead of you.

-Is there anything else you would like to share with the 508 family/ MX community?
The 508 Family and the Moto community have been instrumental in supporting Scars and Stripes 1776. I established this charity to foster a community dedicated to helping Veterans and First Responders. Thanks to the incredible backing from both the 508 and Moto communities, we have been able to save lives, enhance quality of life, and give back to those who serve. One of our primary initiatives is throttle therapy and our ride days. If you are a Veteran, First Responder, or ally of this community, we encourage you to reach out and get involved. We have many exciting events planned for 2025!

I would like to take the time as well to thank all of my sponsors and everyone that helps me out!
Hutch Motorsports
139 Designs
Flowvision Co
Phoenix Handlebars
Guts Racing
Factory Flori Racing
Eighteen Photos
Firehouse Speed Shop

Click on the link in our story to read the full Spotlight!

Project YZ250. Turned this 2013 from basket case to almost brand new. Full engine rebuild top to bottom with v***r bl...
12/28/2024

Project YZ250.
Turned this 2013 from basket case to almost brand new. Full engine rebuild top to bottom with v***r blasting all engine parts. Polisport restyle kit, new tires, cleaned carb, new graphics and a host of other upgrades. Love these projects.

Address

Woonsocket, RI

Website

Alerts

Be the first to know and let us send you an email when Factory Flori Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Factory Flori Racing:

Shortcuts

Share

Category