Overkill Racing and Chassis

Overkill Racing and Chassis The crossroads between safety, innovation, and creativity are the reasons why we proudly say "If your gonna build it... might as well OVERKILL it"

It all started out with a stock 68 Chevy Suburban and a dream. That dream was to turn a classic into a monster, monster truck that is. One project, one man, and few friends decided to make that dream a reality. In the mist of the months of hard work, long hours, and late nights, it was decided that this could be bigger. Once what was thought as a dream project had now turned into something much mo

re and that was a reality and career. It was decided that we must do what we love and love what we do and that is to build monsters. A once simple stock suburban grew into a monster but it meant something much more. It showed the feelings, dedication, and passion that we all had. We did not strive to build a mediocre truck we built a stout beast that was beyond the norm. Every little project went from simple to over the line. In the end, we went from stock to monster to overkill!!!!!!! Overkill Racing and Chassis was born. In this business we strive to bring customer satisfaction to each individual and create one of kind projects that are truly outside the normal realm of reality. From full blown monster trucks to chassis OVERKILL is exactly what you are going to get. We put our twist on projects you want built and fully immerse you in the one of a kind products you will get with our company. We are passionate and dedicated to our product and want to bring our services to you. Our journey has begun. Stay tuned on both our website and page for past, current, and future builds. We make builds unique from finish to end and best of all everyone can be a part of it, thru photos and videos, you can be a part of the crew. Any questions feel free to contact us on our email at [email protected] or on our page. Thanks again for visiting our page and remember...... "If you’re gonna build it, might as well overkill it"



Joel Buschmann

President and Founder

Hey guys! We have a 17-22 F250\F350 bumper up for grabs by someone local to Salt Lake City Utah. Our shop truck is a 23+...
09/01/2026

Hey guys! We have a 17-22 F250\F350 bumper up for grabs by someone local to Salt Lake City Utah. Our shop truck is a 23+ so we need to find a 17-22 truck here! Being this is a pre-production bumper we can offer a discount on it! We would prefer someone local to us so we can also install it for you at no charge! (Powdercoating, and installation of lights and winch are not included)

This bumper is designed to fit a Zeon 14k winch, although it has the standard 10x4.5 winch mount. It also has two spots for 3 inch LED pods and on the wings there is a spot for 3 one inch square lights such as S1's!

This specific bumper is designed to work with factory parking sensors along with your adaptive cruise control!

If you have any questions please let us know!

Sheet metal or hybrid wings?Can't go wrong with either option, sheet metal offers far more protection at the cost of wei...
09/01/2026

Sheet metal or hybrid wings?

Can't go wrong with either option, sheet metal offers far more protection at the cost of weight. Hybrid offers a lighter, sleeker look, and weighs less.

Much easier to fit lights in the wings on hybrid bumpers, but the sheet metal has an option for a triple hoop for a classic touch.

Both bumpers fit a full size winch, and can be offered with various light cutouts to fit your needs!

Which would you pick?

Oh, btw these start at $675 shipped for a diy kit! less

Rad shot Charlie Nelson got of our new 2023-2027 AlumiDuty front bumper 😎🀠. Get yours in either a fully fabricated versi...
08/11/2026

Rad shot Charlie Nelson got of our new 2023-2027 AlumiDuty front bumper 😎🀠. Get yours in either a fully fabricated version (shown) or a diy variant available on our website below:
πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡
Overkillracingandchassis.com

08/11/2026

Lots of peeps asking if we are going to sell our new AlumiDuty 250-350 &450-550 without a bullbar. The answer is of course yes! We have made a few more of the bullbar variants because the manufacturing process is alot harder so we wanted to make sure that was dialed in.

I personally think the non bullbar version looks way better on a factory size truck and the bullbar version looks alot better on big lifted trucks or ones with service beds.

Get your DIY or fully fabricated f250-350 and 450-550 front bumper with free shipping on our website below:
πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡
overkillracingandchassis.com

What a rad mid-assembly shot of Jason Stringham AlumiDuty bumper stuffed with the best junk The Scientists of Lighting a...
08/10/2026

What a rad mid-assembly shot of Jason Stringham AlumiDuty bumper stuffed with the best junk The Scientists of Lighting and WARN Industries | Since 1948 has to offer, it really doesn't get much better than this 🀠😎. Get your DIY or fully fabricated 2023-2026 AlumiDuty front bumpers available only on our website
πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡
overkillracingandchassis.com

Absolutely love our new AlumiDuty bumpers we just released. Lots of questions wondering if we will do a non bullbar vari...
08/09/2026

Absolutely love our new AlumiDuty bumpers we just released. Lots of questions wondering if we will do a non bullbar variants or a 2017-2022 variants. The answer to both is yes! We just need to find a few guinea pigs to verify fitment before starting production on them. But expect somthing in the next month or so. Get your 2023-2027 250-350 and 450-550 DIY or fully welded front bumpers now on our website
πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡
overkillracingandchassis.com

08/08/2026

Super excited to finally release our DIY and fully fabricated 2023-2027 Ford AlumiDuty F250-350 and 450-550 bumpers. This has been a project in the works for the better part of this year with Arturo Marquez 13 Motorsports Engineering and Rodrigo Rodarte have really have not wanted to rush them to market instead trying to come up with a well thought out design that is manufacturable, looks rad, and is affordable to those wanting to put their own bumper together.
All options and variants are listed on our website
πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡πŸ‘‡
https://overkillracingandchassis.com/

07/15/2026

Neat conception to reality on a 1927 Auto Car manifold we are getting ready to send off to get metal 3d printed for some junk Robert Butler and Jaron Greenwood are widdling away onbπŸ€ πŸ€“. Man this one took about every tool in the toolbox to get it to come together. EINSTAR scan data pushed into yee ol trusty SOLIDWORKS and then test fit with our Bambu Lab H2D. Burned quite a few brain cells with Arturo Marquez 13 Motorsports Engineering getting this put together but man its neat seeing it in its final form!

Side note: Any advice or experience with metal 3d printer companies would be greatly appreciated if tagged below for some help on this one. The part dimensions are roughly L 36" W 7.375 H 5.25 316L

07/05/2026

Everytime I come to Camp Bully there's so much rad junk to see and do it can be equally overwhelming as it is relaxing! But somehow im always drawn back to Jason Stringham fully restored 1922 hit and miss engine driven ice-cream maker because it's just so fascinating πŸ˜‚πŸ€“. Its just so enjoyable to watch it work and consistently away and the best part is after an hour or so of staring at it, magically some of Ashley Stringham Huckleberry ice-cream is ready to eat 🀀🫢.
I didnt do a full tour of Camp Bully because I didnt ask permission to, but man this place is so so cool and its such a perfect time of year to visit.

I hope everyone has a safe and enjoyable 4th πŸ‡ΊπŸ‡²

Address

1948 W 2425 S
Woods Cross, UT
84087

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 8am - 6pm
Sunday 8am - 6pm

Telephone

+15756449271

Alerts

Be the first to know and let us send you an email when Overkill Racing and Chassis posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Overkill Racing and Chassis:

Shortcuts

Share