AR Fabrication

AR Fabrication Contact Us -
Email - [email protected]
Phone - 540-7223966 T

At AR Fabrication, we have a quality control process for Sleeving, or any other machine work for that matter, that is detailed and ready for your review.

08/20/2026

Ford 3.7 V6 Cyclone Crankshaft getting machined and balanced, this crankshaft required 65grams of tungsten per side due to the weight from Manley rods and piston kit.

Grade-A-Garage sent us this VR38 Engine for a complete inspection and rebuild. This engine had a cracked block from lift...
08/19/2026

Grade-A-Garage sent us this VR38 Engine for a complete inspection and rebuild. This engine had a cracked block from lifting a gasket, worn out guides, worn out valvetrain, worn out rod bushings and worn rings. This is not unusual work for us but what we actually specialize is. After replacing the guides, installing a complete Ferrea Racing Components valvetrain, replacing the Manley rod bushings with our own oversized Ampro Bronze bushings, adding coatings to the Manley Pistons and the Bearings we took care of the balancing and full assembly of the engine. The results always speak for themselves. We can't thank Grade-A-Garage enough for their trust in us with this build and the many more we have been performing for them.

08/19/2026

6.0 Diesel Cylinder Head machining for SS Oring Groove for Shoprat Metal Works.

08/18/2026

Road Race Darton Sleeved B18C5 Type R in the Hone, 84mm Traum High compression Pistons, Calico Coated, ARP Hardware.

08/18/2026

700hp Darton Sleeved Ford Ecoboost 2.3 Traum Pistons, ARP Hardware

08/13/2026

08/12/2026

1000HP Darton Sleeved Shelby GT500 5.8 in the hone, Full Long Block Build for Grade-A-Garage.
JE Pistons, ACL Bearings, Calico Coatings, ARP Hardware, Cometic Head Gaskets.

08/10/2026

1000hp Darton Sleeved Honda K20a2 Drag and Drive block in the Rottler CNC Hone. This block has Diamond pistons, and machined for Fire rings, along with a custom copper Cometic head gasket, and ARP625 head studs.

08/09/2026

CNC ported Honda R40 Cylinder head for a 1200hp long block build. CHE exhaust seats, GSC Bronze guides, Ferrea Comp + valve train.

08/08/2026

750hp Darton Sleeved Ez30 twin turbo build long block build, ACL Bearings, Calico Coatings, Custom Traum Pistons, Total Seal Rings.

Address

16 West Pall Mall
Wi******er, VA
22601

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm

Telephone

+15407223966

Alerts

Be the first to know and let us send you an email when AR Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AR Fabrication:

Shortcuts

Share