What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5am

Snow Performance

Snow Performance is the world leader and experts in water/methanol injection systems for gasoline and diesel applications. The Water/Methanol Experts

From performance to efficiency and economy, Snow Performance has a specific application to suit your needs.

05/25/2026

Behind every flag is a story of service, courage, and sacrifice.

This Memorial Day, we remember the heroes who gave everything for this country and honor the legacy they left behind.

With gratitude and respect, we will be closed on Monday, the 25th.

05/22/2026

The Snow Performance Stage 3 Boost Cooler uses both boost pressure and fuel injector pulse width to build a true two-dimensional water-methanol injection map. Instead of relying solely on boost, the controller can adjust delivery based on how hard the engine is actually working, giving forced-induction EFI setups more accurate fluid control across a wider range.

That means cooler intake temps, increased octane, lower EGTs, and more consistent performance when the engine needs it most. The controller also mounts cleanly on the steering column or dash and functions as a boost gauge, water-meth controller, and fuel system monitor in one.

Up to 100°F intake temp reduction. Up to 25 points of octane increase. Smarter control for serious boosted setups.

When Power Matters, Trust Snow Performance.

05/20/2026

Know when your water-methanol supply is getting low before it becomes a problem.

The Snow Performance Low Level Sensor is designed to work with any water-methanol reservoir and alerts you from inside the cab when the fluid level drops too low. It includes a voltage-based tank level switch, sealing grommet, yellow LED, and instructions for a clean install.

A simple upgrade that adds confidence, protection, and awareness to any water-methanol system.

When Power Matters, Trust Snow Performance.

05/19/2026

Cooler air. More octane. Better control under boost.

The Snow Performance Stage 2.5 Water-Methanol System is built for forced-induction 2014+ Corvette and 2016+ Camaro 6.2L applications, giving LT-based builds a cleaner way to add charge cooling and octane support without a complicated install.

This system uses a vehicle-specific throttle-body spacer injection plate, a braided stainless line, and 4AN fittings for a clean, reliable setup.

The VC-50 progressive controller reads boost pressure and adjusts injection as boost increases, helping deliver the right amount of water-methanol across the power curve instead of simply switching the pump on at full output.

With up to 25 points of octane increase, reduced intake temps, and a 52mm gauge-style controller that displays boost, injection percentage, low-level warning, fault codes, and more, this system is a strong upgrade for boosted Corvette and Camaro owners looking for better cooling, added knock resistance, and more consistent performance.

When Power Matters, Trust Snow Performance.

05/18/2026

Boost-controlled water-methanol activation made simple.

The Snow Performance 15 PSI Boost Switch activates your water-methanol pump at full duty cycle once your selected boost pressure is reached, then shuts the system off when boost drops below that set point.

Adjustable from 1–15 PSI, it's a simple solution for low-boost, positive-displacement supercharged, and drag-race applications that need cooling and octane support under heavy throttle.

When Power Matters, Trust Snow Performance.

05/12/2026

Give your Evo X water-methanol setup a cleaner nozzle location.

Our Snow Performance Evo X Water Methanol Plate installs between the throttle body and intake manifold, providing a clean mounting point for up to 2 Snow Performance Hyper-Sonic nozzles right where you need them.

Designed for the 2.0L Mitsubishi Evo X, this plate helps avoid drilling into the intake tube while keeping the install clean, simple, and effective.
Includes the throttle body spacer injection plate, high-temperature gasket, required hardware, and fitment instructions.

When Power Matters, Trust Snow Performance.

05/06/2026

Built for high-compression, carbureted V8 muscle.

The Snow Performance 4500 Fl**ge Water-Methanol System is designed to help naturally aspirated engines run cooler, make more power, and take advantage of increased effective octane on pump gas.

Using a 4500-style carb spacer plate, 300 PSI UHO pump, dual nozzles, WOT switch, and an included solenoid to help prevent vacuum siphoning, this Stage 1 system delivers water-methanol under full throttle when your engine needs it most.

A clean, effective upgrade for serious carbureted builds running 11:1 to 13:1 compression and beyond.

When Power Matters, Trust Snow Performance.

05/05/2026

For the 2.0/2.3L Ford EcoBoost guys who want cooler charge temps, better pump gas performance, and a cleaner way to add water-methanol.

The Snow Performance Stage 2.5 Boost Cooler System is built specifically for these EcoBoost platforms, featuring a direct-port injection plate, four Hyper-Sonic nozzles, a high-flow solenoid, braided stainless line, 4AN fittings, and the VC-50 progressive controller. Instead of just spraying at a fixed rate, the VC-50 brings the system in with boost so delivery ramps in as the engine actually needs it.

Lower IATs, added octane support, help with carbon buildup, and a much cleaner install than trying to piece together a universal setup.

Made in the USA and built for boosted Fords that get driven hard.

When power matters, trust Snow Performance.

05/04/2026

Clean up your 102mm LS water methanol install with the Snow Performance Throttle Body Injection Plate.

Designed for aftermarket 102mm LS throttle bodies, this plate features 2 built-in water-methanol nozzle ports, allowing you to run a single or dual-nozzle setup without drilling into your intake tube. Bolt it on, seal it up, and get a cleaner, more professional install with the nozzle placement right where it needs to be.

Made in the USA and built for serious boosted LS setups.

When Power Matters, Trust Snow Performance.

04/30/2026

Built for boosted Genesis 2.0T owners ready for cooler, harder-hitting power.

The Snow Performance Stage 2 Water Methanol System for the 2010-2014 Hyundai Genesis Coupe 2.0T helps cool intake temps, increase octane quality, and support more boost and timing on pump gas.

Featuring a custom throttle body spacer plate, braided stainless line, methanol-safe fittings, a 2.5-gallon trunk mount tank, dual Hypersonic nozzles, and Snow’s 300 PSI UHO pump, this system is built for clean installation and reliable delivery.

The VC-50 progressive controller scales injection with boost and combines a 52mm boost gauge and water-methanol controller in one clean display.

When Power Matters, Trust Snow Performance.

04/29/2026

The Snow Performance 0-500 PSI Pressure Gauge gives you a clear, easy-to-read pressure reference when setting up CO2 pressure control systems or low-pressure safety switch setups on water-methanol systems. Instead of wondering where pressure is at, you can see it, verify it, and make adjustments with confidence.

Whether you’re dialing in pressure control or just making sure the system is doing what it should, this gauge is a simple piece that adds a lot of value during setup and tuning.

Coming standard with an 1/8 NPT male connection and a clean, readable face, it’s a solid addition for anyone who wants their system set up right.

When Power Matters, Trust Snow Performance.

Address

5411 Seymour Highway
Wichita Falls, TX
76310

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5am

Website

http://Snowperformance.net/

Alerts

Be the first to know and let us send you an email when Snow Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Snow Performance:

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Wichita Falls?