What are the opening hours?

Monday 9am - 4pm Tuesday 9am - 4pm Wednesday 9am - 4pm Thursday 9am - 4pm Friday 9am - 4pm

Valex Racing

High Performance car parts and accessories for Honda, Acura, Subaru, Toyota, Nissan, and more. 1000s

07/17/2026

Snapping exhaust manifold studs or striping exhaust manifold bolt holes sucks. That's why we made this kit. It features genuine ARP stainless steel studs and a set of stainless steel nuts. This will prevent rust & corrosion and avoid bolt holes from getting stripped. Also... try breaking one of these studs. Good luck. Send us a picture if you actually do. Would be one for the books.
www.valexracing.com
Or click the link in our Bio!

07/10/2026

3" inch Honda Acura All Motor Through Headlight Intake - B Series EG EK (Wrinkle Black)
A modular intake with an optional Blox Racing air filter / velocity stack combo.
Run the short filtered setup on the way to the track and run the through headlight velocity stack once you're at the track.
Or however you feel like running it. That's the beauty of the modular design 🤝
Check it out at and other options at valexracing.com!

07/02/2026

Gates Racing timing kits are in stock on valexracing.com! These kits include a Gates Racing Timing belt (Made in USA), NPW Water Pump (Made in Japan), and an optional OEM Tensioner (Made in Japan) for the engine of your choice. Nobody likes the thought of a snapped timing belt so pick up your kit today!
Link in bio or www.valexracing.com

Available for all B Series Engines

06/18/2026

EM1 CMC conversion kits are available for many chassis. 8th gen, 9th gen, rsx... This is one of the best upgrades you can do for your drivetrain. The EM1 CMC kit deletes the clutch delay valve which allows you to shift faster and more safely.
You can find them at www.valexracing.com or at the link in our bio!

06/11/2026

Maximizing the airflow of the Skunk2 Pro Series intake manifolds from B Series and H Series (Port Match and Speed Bump Removal).

Port matching your intake manifold to your throttle body is one of the cheapest and easiest ways to improve air flow in your air intake system; if you have the tools of course. Slapping a bigger throttle body onto an intake manifold that has a smaller opening results in there being a small lip that the air will come in contact with before flowing into the plenum. This is not ideal.

Also, the Skunk2 cast manifolds have a small casting lip that is a few inches past the plenum opening. We call this the "Speed Bump."

Our solution to the lip and speed bump problem is to match up and trace a thermal gasket that is the size of the throttle body we would like to install on the manifold. In this case we are installing a 74mm throttle body so we used a 74mm thermal gasket.

We then use a right angle die grinder with a tungsten carbide bit to remove the lip and contour the new opening so the air will flow smoothly into the plenum. We then do the same to the Speed Bump.

Now that the opening on the intake manifold matches the size of the throttle body, we move onto the finishing stages of smoothing it out with a sanding bit to allow the air to glide across the newly ported surface.

That's looking so much better. Notice that the Speed Bump has been completely removed and polished allowing for optimal airflow within the intake manifold plenum.

Note: The sharpie marks you see in the photo above are just on the thermal gasket from when we traced it earlier.

And finally here is our finished product with the thermal gasket and 74mm throttle body installed.

Yes this is a fairly straightforward process, but it is easy to make irreparable mistakes. It is also expensive to gather the necessary tools for the job. We offer this as a service available only on www.valexracing.com or at the link in our bio!

06/04/2026

More EXEDY clutch kits available on the website right now! Now available are Subaru WRX and STi clutch kits.
We have Exedy OEM, Stage1, and Stage 2 kits for the Subaru WRX and STi.
You can browse our inventory at www.valexracing.com or at the link in our bio!

05/29/2026

This is a brand new product here at Valex Racing. This is an AEM fuel rail with an Aeromotive style fuel pressure regulator adapted to fit directly on the rail. This is sweet for a few reasons. One: It's simple. Two: It looks awesome. Three: It is a expandable in the future if you want to convert it to an off rail shock tower mounted system.
The cherry on top is that it some fully assembled and bolt on ready.
www.valexracing.com or link in bio

05/14/2026

Ready to upgrade your fuel system in your golden era Honda? Or maybe your factory hard lines are starting to rust out. Either way, we have what you're looking for. This is one of our most popular fuel line kits. It features a black stainless steel 6AN fuel feed line with all fittings needed to adapt straight into the OEM fuel filter and the OEM fuel pump hanger. And to make the return line easy, we include a high quality rubber fuel return line. This kit will work for most street car or mild track car setups. This is for B/D/H/F series engines in EG EK DC Civic/Integra.
www.valexracing.com or click the link in our bio!

05/10/2026

We finally got the hood onto the CRX. We took a long time to finalize the hood fitment because we wanted to trim as little as possible from the skeleton.
Either way, we’re happy that the hood is on and the car is ready for a drive.
As a refresher, this is a full K20 Type-R swap with matching trans. The car is light, makes good power and is really fun to drive. We’re still deciding what the next swap will be for the car, but for now we’re just getting it cleaned up and ready for the season.

05/06/2026

Automotion Wisconsin is a little over a week away 5/15-5/17. This year you will find us cruising the strip with the FK8.
We’ve been going to this event for years and almost always use this event as a deadline to complete some project on one of the shop cars. This year we’re bringing the FK8 out to do a bit more testing with the changes that we made back in 2024 (and to just enjoy a nice drive in a fun car).
For those that are unfamiliar with Automotion, it is a car show that takes place in the Dells the weekend before Memorial Day every year. Tons of car guys and truck guys from all over gather there and spend the weekend driving up and down the strip and checking out some interesting builds. We’re excited. Let’s us know in the comments if you’re attending.

Address

2150 Foster Avenue
Wheeling, IL
60090

Opening Hours

Monday	9am - 4pm
Tuesday	9am - 4pm
Wednesday	9am - 4pm
Thursday	9am - 4pm
Friday	9am - 4pm

Telephone

(847) 593-9490

Website

http://www.valexracing.com/

Alerts

Be the first to know and let us send you an email when Valex Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Valex Racing:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Autos & Automotive Service in Wheeling?