FIGS Engineering

FIGS Engineering FIGS Engineering is an aftermarket automotive product design company Specializing in Lexus and Toyota Platforms as well as other niche markets.
(2)

FIGS was founded in the spirit of problem solving via elegant design. Our first product was a bolt on hood support kit for the Lexus IS300 which proved that sometimes the little things will cary you a long way. FIGS now offers over 90+ select products to the consumer which are a mix of ground-up development, coop partnerships with other leading product companies and
very select quality products t

hat meet our internal review process. We strive to design and manufacture the highest quality components using the latest processes and technology . We test our products in real world situations and extremely high stresses. We continuously use feedback to drive the quality of our products further and strive for 100% customer satisfaction.

08/25/2026

Link in story. 2JZ GTE OIL PAN GIRDLE PLATE
Now on the site, limited to 10, less than you think.
Improve oil seal and make servicing easier.
▶️▶️▶️shopfigs.com
Search L1581

08/21/2026

Diode Dynamics SS3 retrofit for ARB bumper fog lights.
Insane output.
Tag a landcruiser buddy that needs this upgrade.

Should we release this?

▶️▶️▶️shopfigs.com

08/13/2026

Fixing 2JZ Problems
Thin oil pans get tweaked when they are removed, plus they weep under pressure when FIPG seals break down over time. We made a limited number of rear sump GTE girdle plates that add ejector pins and allow more even force distribution to keep the seal intact.

Is this an upgrade you would install on your Supra or GTE-swapped build?

▶️▶️▶️shopfigs.com

08/01/2026

First ELATE MFG. 2650 Supercharged IS500 going home today after some tuning and upgrades. The Improved Racing comp catch can is going to show up in more of our builds, and we look to make our breather quick, connect product available soon.
theisdragon800

What would you do with a supercharged 500?

▶️▶️▶️shopfigs.com

07/29/2026

Always making new things.
Torque plates for 115mm pinion diff service on the site soon. Pressed in 1/2 in stub extension. Limited run.

07/11/2026

IS500 Elate Supercharger Update
First off, I wanna say that developing products is not always straightforward. And there's a tremendous amount of work done by many people to bring things to market. The more we work as a community, and the more we share information, the better it is for everyone. ELATE MFG. has made a great kit for us and the pioneering customers that have given their hard earned money to participate in the pilot program have allowed so much progress in what I would classify as a short amount of time. There's been a great network, making progress, not making progress, discovering insights, and overall, working as a collective to figure a lot of things out. We made some great progress this week on our own in-house calibration, but it wouldn't be truthful to say that I did it completely alone.

I want to thank 🎌 Tuned By AboDana 🎌 for helping me confirm the hardware side of things was working well, as he remote tuned this vehicle, providing peace of mind that there weren't any issues with the installation. That allowed me to focus more specifically on the calibration aspects and beat my head against the wall, knowing that there would be light at the end of the tunnel. The results in this video don't really show the whole story. The behind the scenes, ideas and collaboration that are really the whole reason why I enjoy this community.

And yes, there will be many questions, and it will be hard to explain why our eddie current load cell Brian Proski dyno reads crank HP instead of whp, how much horsepower is possible, and what everything costs in the end. But this is just one more step forward as we move towards that final state where you can just press a button and click it on the website.

Still some road simulation and drivability corners I want to verify, but things are looking very good overall, and i'm sure if you slapped one of these things on in the end it will put a big smile on your face. Remember, this is just software, and you can play with it as long as there are hours in the day to make improvements. Let's just get you a solid start and the confidence to drive.

▶️▶️▶️shopfigs.com

07/04/2026

Happy Independence Day
from the best country for manufacturing 🇺🇸

▶️▶️▶️shopfigs.com
Any promotions are automatically active and price is indicated on the website.

Small snippet of a shop visit profile video up on youtube produced by DriftFarm Motorsports 👊💯🇨🇦😄

06/30/2026

Made a few things to get our 2GS back on the road. Always wanted some of these... more ideas coming.

▶️▶️▶️shopfigs.com

06/19/2026

And that last of custom Supra parts for Patrick Blake Racing
Satin Black

▶️▶️▶️shopfigs.com

Address

11925 W. I-70 Frontage Road N
Wheat Ridge, CO
80033

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+17207288954

Alerts

Be the first to know and let us send you an email when FIGS Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to FIGS Engineering:

Shortcuts

Share