TID Performance

08/05/2026

Race Ready Shade has us looking official

07/29/2026

07/29/2026

06/22/2026

LIMITED EDITION DROP🚨

What started in a small garage became a world record.

This shirt represents every late night, every sacrifice, every pass down the track, and every person who supported us along the way.

The world's first 8-second stick-shift 350Z.

We're taking Pre-orders in a limited 2 week window . Available in Black or White options ! Submit your orders with the LINK IN THE COMMENTS BELOW 👇👇⤵️⤵️!

Thank you for being part of the journey. We're not done yet so stick around as we continue to push the boundaries😎

06/06/2026

The results are in on this newly boosted stock VQ37VHR engine yielding a stout
💥677whp/505wtq on e65 at 16psi
💥518whp/408wtq on pump 93 13psi

Mason came to us with his bolt on NA VHR Q50 with the itch for more power. We said no problem !

We outfitted this vehicle with a slew of upgrades .
Starting with a TID Custom Top Mount Turbo Kit using the turbo of his choice - Pulsar 6870 - and a VR30 trans swap to back it up .

Other supporting upgrades include:
-TID Custom Combo catch can
- Fuel Return Kit & Top Hat w/TID custom wiring harness
- 1300s
-Walbro 525 Fuel Pump
- Mission Control Box
-TID Custom Oil Cooler kit
-TID Custom Trans Cooler Kit
-TID Gallery Gasket Service
-TID Custom powersteering relocation
-ISR headers cut and welded with vband flanges
-Ecutek calibration by

03/16/2026

Another gallery gasket job knocked out, including brand new oem water pump and
Thermostat

This is one of the most critical upgrades for the Nissan VQ35HR engine / Nissan VQ37VHR engine platforms that too many people overlook.

The factory paper gaskets/hardware are known to fail over time, leading to low oil pressure, timing issues, and eventually catastrophic engine damage.

If you're planning on boost, hard driving, or just want reliability, this upgrade isn’t optional, it's insurance.

03/06/2026

Well look what rolled into the shop… the OG record-breaking kit. 👀🔥

If you’re not familiar with this setup, it once held the 1/4-mile AND 1/2-mile records for the platform ,and it still holds the 1/2-mile record today.

Back when this kit was built, it pushed the VQ platform into territory that not many people were willing to go. In my opinion, it’s a piece of VQ history.
This setup has changed hands a few times over the years until it eventually landed with .bikez and now it’s in the shop getting a new life with a hood exit setup.

This whole setup sits behind the OEM radiator support.

But the next chapter is going to look a little different,
This kit is heading to the drift track.
Same legendary setup — just living life sideways instead of in a straight line.
And who knows… maybe one day it’ll make its way back to the drag strip to remind people what it’s capable of. 👀

03/04/2026

Freshly restored timing cover for the VHR / HR platform
If you’re doing gallery gaskets, you already know this is the center piece of the job.

Now every gallery gasket service will include a fully restored timing cover — no additional cost, no added wait time.
No more crusty covers. No more cutting corners. Just clean, properly refinished parts going back on your engine the right way.
Other colors are available (custom colors will require lead time).
If you’re running a 350Z, G37, or anything VQ35HR / VQ37VHR based, this is how it should be done. (DE options available)

Drop a 🔥 in the comments if you care about doing things the right and clean way.
Tag someone who needs gallery gaskets before it’s too late.

01/14/2026

Nothing to special with this one but from time to time i will do small jobs/ walk in work! was having some clearance issues with his catch can and supercharger pulleys. New mounting points and pushed it closer to the radiator gave a ton more room with out a worry! Afterwards sent to for wrinkle black coating.

01/07/2026

Q50 Top mount turbo kit hot side piping. Waiting on some small odds and ends and this kit will be a wrap.

40MM gates
6870