Integrity Complete Car Care

07/08/2022

This is why you don't trust someone else to clear your fi***rm or play with guns in your car.

06/25/2022

So, I've noticed some interaction with this page still. I am keeping it active for my Waxahachie people, but I am only operating the shop in Duncanville now. I hated to leave Waxahachie but the location here is better even if it is smaller and running 2 shops was just going to increase the risk of something not being done right due to miscommunication or etc. If you've had your car or truck serviced by me hopefully you understand how much my reputation means to me, and if you've had your vehicle serviced elsewhere you know how hard it is to come by a mechanic that takes more pride in their work than their bank account. I'm Still out here doing by best which is easily better than any dealer and significantly cheaper. If that's something that you can appreciate, you'll find me turning wrenches and holding it down in Duncanville at 730 N Main St 75116. No need to call just come by. I do still respond to messages on this account whenever Facebook is gracious enough to tell me I have them if you have any questions.

07/17/2020

This is certainly a first for me. I definitely understand dropping things in an engine compartment and them working their way to the bottom but what were you doing with denture cream under the hood to begin with?

01/30/2020

11/30/2019

Something special in the works.

11/30/2019

Just because it's newer and European doesn't mean it requires a dealership. Clockspring/SAS module installed calibrated and programmed for half the price of dealer parts and service. Same warranty.

11/29/2019

Not your average catfish

11/29/2019

Doing brakes yourself or paying someone less than qualified? Don't get it twisted, your brake line that is. Everything has a place and a reason. In this case a twisted brake hose rubbed through a CV boot and it returned the favor putting a hole in the brake line.

06/26/2019

Always a pleasure working on a 70s model on a 01 chassis with a 7.3

06/05/2019

Because someone asked....