RM Fabrication/Redneck Motorsport

10/05/2026

Started the process of a new shop. Going to be a long process but can't wait to have the extra space.

10/05/2026

Blazer moving under its own power finally, few small things to finish up and hopefully done.

09/12/2026

Please Do It!
If you don’t leave a picture, I will be bummed. Ever wonder why there are so many people on your friends list that you don't even talk to? If you're reading this leave me the last photo you took -then put this on your wall so I can leave one.

Watch - No One Will follow Directions🙃
I followed the directions because this seems like a fun way to see what my friends are up to these days.
Okay friends … and go! 😊
Here’s Mine…

09/02/2026

A little progess on the blazer. Engine, trans, and transfer case in. Flanges welded on the headers and installed. New engine harness built, ecm side of the harness and ecm installed under the dash. Heater/ac box reinstalled with new heater core. Made some plugs for the egr valve and evap solenoid, and a fuel regulator delete plug. Next up is engine harness and fuel system, then start assembling the front end and make it run.

08/11/2026

Making a few needed repairs on the blazer. Typical square body frame issues around the steering gear. Might as well add a lift kit while I'm at it. Rear shackle bolts are smaller on the front springs I had so I had to make a set of sleeve to fit.

08/01/2026

08/01/2026

A little side by side rebuild after Collin had a little too much fun. Pulled Everything as straight as I could. Added a few bars, also plated the floor amd insulated to help keep the engine heat out of the passenger compartment.

08/01/2026

Non car related project, set of steps for a location at work.

07/24/2026

On the road to Scotty's Kustomz Art & Metal car show