Jimz Cycle Werx

Jimz Cycle Werx We are motorcycle tuning and landspeed racing specialists located in Vallejo, California. Engine Building and LSR prep and tuning.

We tune American and metric motorcycles of all types (street and race)
We do Busas to Buells and everything in between. Jimz Cycle Werx has dyno tuning services for all motorcycles at our facility. ...We have done everything from a 100cc landspeed bike to several bike powered streamliners. We are familiar with most tuning software available for fuel injected motorcycles including Power Commanders

, Bazzaz, Tune Edit, Tuneboy, HD Supertuner, ECU Editor as well as a number of stand alone ecus--Link, Vipec ,and many more. Let us get the most from your machine. We are familair with tuning turbocharged and supercharged bikes as well as we currently race 3 different turbocharged bikes. We are also Buell Specialists and have owned and raced many different models,from Tubers to 1125's. From service to high performance engine building, we can do it all for your Buell. Jimz Cycle Werx is proud to support the racing efforts of Black Art Racing--www.blackartracing.com-- who hold multiple records at the Bonneville Salt Flats.
707 548-7906

10/10/2024

Gen 1 Hayabusa---runs well, dash temp gauge goes straight to high and dash shows CHECK--no codes, swapped sensor and ecu, no change--any clues??

09/23/2024

Hayabusa folks, Gen 2003 bike--black frame, black bodywork, thought 03 bikes were silver frame???Who ever owned it before already put all Gen 2 suspension and wheels on it--looks like R-1 front calipers

09/12/2024

Best flowing in tank pump for a Gen 1 Busa, think Dennis Clanton has mentioned one?

09/10/2024

ECU Editor question, bench flash set up Gen 2 bike, I can connect or engine data, but everytime I try to read the ecu it gives me a com port error--set to com 3? And advice---

09/08/2024

Allright---Hayabusa Gen 1 cylinder---where near Calgary can you get this cut for o-ring???

09/06/2024

2010 Busa, re-installing engine, where do they hide the connection for the oil sensor ABS and s**t in the way of every damn thing---

09/05/2024

Gen 2 Busa here --had the engine out for trans work ,has a PC5 on it and looks like it was on the secondary injectors----some connectors were undone when engine came out---looking at Dynojet install guide and it has the PC going to the primary injectors?? Any input?

08/29/2024

Buell folks,helped out a fellow here at Bonneville. He is running a stock XB9 with the Buell Brothers racing folks. Santa Claus--IYKYK-- brought him over because he was unable to get any more speed as he was hitting the stock limiter, so we hooked up ECM -Spy and tweaked his maps and bumped the limiters up by 500 rpm. He came by this morning so happy as he gained 8 mph. So much fun here at Bonneville 😁

08/21/2024

2005 Hayabusa roller cam chain---APE was no instructions on pin count etc??? Any tips--

Our annual ritual before the Salt---music in the park with friends---the band was great and it was a wonderful group of ...
08/19/2024

Our annual ritual before the Salt---music in the park with friends---the band was great and it was a wonderful group of friends---missing Kim Krebs as her flight was delayed---darn!

08/18/2024

Hayabusa guys--it's been a few years but someone here from Europe recommended a nice hi flow intake pump for a Gen 1---my memory has faded--

08/13/2024

Two things for the Hayabusa folks---in need of an 84 mm cylinder and where would I send a head to repair one area between exhaust valves----

Address

100 Commercial Street
Vallejo, CA
94589

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Jimz Cycle Werx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jimz Cycle Werx:

Shortcuts

Share

Category