Hinnant Design

Hinnant Design We specialize in high-end sound quality car audio products, Performance and suspension parts and accessories.

2011 Acura MDX Navtool CarPlay/Android Auto video interface and backup camera installation.
10/22/2023

2011 Acura MDX Navtool CarPlay/Android Auto video interface and backup camera installation.

Quick oem rear deck sub replacement in a 2003 Lexus GS 300 that wasn’t working. Replaced with the same styled Mark Levin...
08/13/2023

Quick oem rear deck sub replacement in a 2003 Lexus GS 300 that wasn’t working. Replaced with the same styled Mark Levinson factory sub. Hinnant Design

Stereo headunit install on a 2012 Nissan Altima. Customer had on going issues with the stereo sound and power cutting in...
12/11/2022

Stereo headunit install on a 2012 Nissan Altima. Customer had on going issues with the stereo sound and power cutting in and out while driving. The vehicle was brought in for diagnostic check on the vehicle system. During diagnostics and disassembly of the previous stereo installation we found the cause(loose wiring). Since the radio harness wires were just twisted and tapped a rewrite was needed. Which we soldered and heat shrink all wire connection for the best solid electrical connection. After wiring was completed, the stereo was reinstalled and tested the stereo worked flawlessly.

Audi A5 touchscreen CarPlay/Android Auto, backup camera and all black out grill installation.
10/29/2022

Audi A5 touchscreen CarPlay/Android Auto, backup camera and all black out grill installation.

Jeep Wrangler Full Custom Audio upgrade
10/29/2022

Jeep Wrangler Full Custom Audio upgrade

Porsche 911 Turbo Track car Back in for another audio upgrade. The rear subwoofers were upgraded to the Audiomobile EVO8...
07/31/2019

Porsche 911 Turbo Track car Back in for another audio upgrade. The rear subwoofers were upgraded to the Audiomobile EVO8 to gain more output. The amplifier rack was redesigned for a more simplistic stealth look and easy maintenance for for the amplifiers.

Daily Driven Jeep Wrangler Sport Audio Build. goal in this build was to have better sound quality and higher volume leve...
07/05/2019

Daily Driven Jeep Wrangler Sport Audio Build. goal in this build was to have better sound quality and higher volume level with top off. We needed to go with a speaker setup that had higher output but that wouldn’t compromise the sound quality with higher distortion high volume levels. For the job we chose to go with the Hybrid Audio new Mirus “V” Convertible components for the front stage and the Coaxial in the sound bar. They performed much better then expected. Thanks to their carbon-fiber cones and titanium diaphragm tweeters.

Equipment
- Kenwood Excelon DDX 6906S DVD/CD CarPlay
- Alpine V9 5 Channel 75w x 4 , 500w x1
- Hybrid Audio Technologies Mirus V MV61-2/C
- Hybrid Audio Technologies Mirus V MV61-2
- Audiomobile Evo10 Subwoofer


All wrapped up from a few months ago!
07/04/2019

All wrapped up from a few months ago!

Here is part 2 to the build log of the Sound Quality 2003 Porsche 911 Convertible upgrade. This is the finishing touches...
12/09/2018

Here is part 2 to the build log of the Sound Quality 2003 Porsche 911 Convertible upgrade. This is the finishing touches.

Full Sound Quality Audio Build Part 1 we did on a 2003 Porsche 911 Convertible. The goal was have better sound quality ...
12/09/2018

Full Sound Quality Audio Build Part 1 we did on a 2003 Porsche 911 Convertible. The goal was have better sound quality and bring the electronics to current features you would have in never vehicles without making things look out of place. Customer wanted that wow factory from the audio system sound and aesthetics. The entire outdated OEM system was gutted and replaced with all Hertz Audio Speaker components, DSP and Amplifiers. The Headunit used is a Kenwood 773s Navigation/CarPlay/Android Auto unit. For the subwoofer a single Audiomobile EVO 8. To full off the aesthetics the customer wanted, a good bit of fabrication needed to be done. Everything needed to be serviceable with little effort by the owner in a timely manner. So amp rack panels needed to be designed in a way to fit together like a quick puzzle using high quality fasteners. Zero wood or MDF was used in this build. All panels, trim and mounting bracket supports were made out of PVC and acrylic.

To follow the design theme the customer liked, All of the factory dash trim pieces , subwoofer enclosure were hydro dipped in bush aluminum to add those finishing touches.

For safety and accident avoidance a backup Camera was added to avoid hitting any objects. Parking sensors and dvr camera system will be added at a later date when released to complete the full modern overhaul of this vehicle.

The build turned out spectacular, the sound quality and aesthetics was achieved in this build. The vehicle now has a very good soundstage that was dialed in with custom tuning. On the aesthetics side the led lit acrylic panel gives off a nice red glow and contrast with colored matched panels. Customer was very happy with the results.

2014 Jeep Wrangler JK Rubicon. Customer brought this vehicle in for a full audio system upgrade. Goal was to retain all ...
09/20/2018

2014 Jeep Wrangler JK Rubicon. Customer brought this vehicle in for a full audio system upgrade. Goal was to retain all oem features and functions of the vehicle. Keeping the oem look but with more output power and sound quality. The main features needed to be added was a touch screen multimedia unit that has CarPlay / Android Auto unit. We decided to used a Kenwoods eXcelon DMX905S with Capacitive Touch as the source.

We used all Hybrid Audio Technologies speakers for the front stage and Soundbar . The components use for the front are the Unity U61-2v2 with 6.5” midbass and 20mm tweeters. The rear Soundbar used the Imagine series Convertible components which are 6.5”. For replacing the factory Alpine sub. AudiomobileUSA EVO 10 subwoofer was used for their great sound quality and compact space saving design. All new OFC copper was ran for all speakers. Powering the entire system was the Arc Audio XDi X2 850.5 5 Channel Amplifier.

For safety, we added a backup camera designed for jeeps, which mount in the spare tire wheel spoke area. Allows greater vision of obstacles then the standard left side tag mount camera systems. We used the adjustment plate that comes with the camera kit since the Jeep had aftermarket wheels.

Customer very happy with new setup and liked the sound and how everything look pretty much OEM. All functions of the vehicle was retain as we’ll the cargo space.

Kenwood Hybrid Audio Technologies AudiomobileUSA

Address

Urbana, MD

Opening Hours

Monday 10am - 6pm
Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm
Saturday 10am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Hinnant Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hinnant Design:

Shortcuts

Share

Category