icengineworks

  • Home
  • icengineworks
Call Directions Website Contact the business

icengineworks Exhaust modeling and fabrication systems for headers, turbo manifolds and full exhaust.

20/10/2026

Rascoe Garage LLC with a great video showing off our tube cutting jigs! Great for accurate and square cuts to the bend tangent, ensuring a proper fit when welding segments together!

08/09/2026

Saiko Performance getting their down pipe dialed for their Skyline build using our 3” OD Full Exhaust (FE) blocks!

🎥: Saiko Performance

02/09/2026

1-Up Fabrication posted a great video explaining how the Icengineworks system works and how fabricators can benefit from the system. Using the 2-1/4” OD clocks, they go through the process of transferring your block part to metal segments that are then ready to be assembled and welded. Check out their video here, and give them a follow to see more of their great videos!

Video Credit: 1-Up Fabrication

An equal length mock up we did a while back with in Ventura CA!
14/05/2026

An equal length mock up we did a while back with in Ventura CA!

Post Credit: •Icengineworks modelling kit proving it’s worth as I begin to cut the header tube.
08/05/2026

Post Credit:
•
Icengineworks modelling kit proving it’s worth as I begin to cut the header tube.

There’s more than what meets the eye when it comes to our modeling block kits. The Icengineworks control sheets is the u...
28/04/2026

There’s more than what meets the eye when it comes to our modeling block kits. The Icengineworks control sheets is the unsung hero to help fabricators stay organized during the entire build process.

Repost from
•
Just like being back at school...only much more fun!
Using the tubing control sheets to work out how many bends I need to order for the exhaust manifold. Email to .co.uk for the mandrel bends on its way. Looking forward to assembling this in stainless steel.

A to B, equal length runners beautifully modeled with our 1250NP modeling blocks. Next up, locating the weld locations a...
07/04/2026

A to B, equal length runners beautifully modeled with our 1250NP modeling blocks. Next up, locating the weld locations and cutting segments out of metal! 🤘

📸 Credit:

Initial design for both sides done after many iterations. Equal length, similar pressure drop across all cylinders, as well as targeted resonance tuning. Since my turbo match runs positive engine delta pressure(lower exhaust manifold pressure than intake manifold pressure), the manifolds can take advantage of these characteristics like an N.A. engine. Going to start cutting metal soon! turbomanifold

Proud to assist .fabrication on this neat Opel Ascona Build. 2 inch headers all around!
17/03/2026

Proud to assist .fabrication on this neat Opel Ascona Build. 2 inch headers all around!

Well seasoned and still cookin, getting plenty of use out of their Icengineworks modeling blocks!
27/02/2026

Well seasoned and still cookin, getting plenty of use out of their Icengineworks modeling blocks!

Repost from •Work continues on the SBF Foxbody headers. Drivers side is fully mocked up using our pieces. This one is r...
06/02/2026

Repost from
•
Work continues on the SBF Foxbody headers. Drivers side is fully mocked up using our pieces. This one is ready to be transferred to metal. Passenger side work starts tomorrow. These will have part numbers 402051 (302 based) and 402061 (351 based). These should be ready for sale sometime in March. We will keep you posted on our progress.

Address


Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00

Telephone

+16416288887

Website

,

Alerts

Be the first to know and let us send you an email when icengineworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to icengineworks:

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share