Hillbilly Hot Rodz

07/10/2026

Bringing some classic iron back to life!

This '38 Chevy rolled into the shop for some miscellaneous issues, but we dug right in and sorted it out.

​First up: a fresh starter to get things moving. Found out the main engine ground was completely missing, so we fabricated a new one and got it turning over nice and smooth.

​It was also suffering from some long cranking times. The culprit? The ignition coil wire wasn’t hooked up to a positive-while-cranking source. We got that wired up correctly, and now she fires right up.

​To wrap it up, we cleaned up and rewired some faulty gauge circuits so the owner can cruise with absolute confidence and accurate readings.

​Another classic saved and ready for the road!

​

06/30/2026

This '69 Roadrunner came into the shop yesterday with some questionable gauges. We ditched the sketchy electric setup and hooked it up with some reliable mechanical gauges to give the driver an accurate, rock-solid readout.

​There is no job too big or too small for us—we’ll get you in and get it done right. Don’t hesitate to reach out or swing by the shop so we can discuss your ride!
​
​

06/24/2026

Throwing it back to 1976 out on the water!

​One of our customers had this classic boat ready for summer action, but she was being a real pain to get started. They brought it into the shop to see if we could work some magic—and let’s just say, if it’s got a carburetor, we will make it run.

​We tore the carb completely down, gave it a deep cleaning, and threw in all-new gaskets. Now? One pull and this sucker is purring like a kitten!

​We also had to tackle a "no reverse" issue—and whew, that makes unloading a real chore! But we got everything dialed in and all gears are officially good to go.

​Whether it's on the blacktop or the water, don't hesitate to call Hillbilly Hot Rodz for any of your mechanical needs!

​Give us a shout today!

06/24/2026

We love taking care of our repeat customers! This beautiful Falcon made its way back into the shop for some much-needed performance cooling modifications. Sitting in traffic and slow cruising had this sucker running way too hot.

​We teamed up with Champion Cooling Products to fix that. We ditched the stock brass unit and upgraded to:

​• An all-black aluminum radiator (rated for 300HP)

​• A new high-performance fan

​• A custom fan shroud for maximum airflow

​Now, she’s running nice and cool and is officially ready to handle those brutal summer days!

​Looking to keep your classic cool this season? Drop by the shop or send us a DM to get on the schedule!
​

06/13/2026

Hogs and Hot Rods in Collinsville, Oklahoma did not disappoint today! 🔥

It was a scorcher out there, but the turnout was incredible—way more cars packed in this year compared to last!

​If you’ve got a classic ride or a project car that needs some love, we’ve got you covered. No job is too big or too small for us. From frame building and custom metalwork to slick paint, bodywork, and building high-performance engines from the ground up, we handle it all. 🛠️🏁

​Don’t hesitate to call or swing by the shop anytime for mechanical services, restoration work, or honestly, just to talk shop. Let's get that dream build firing on all cylinders. ⚙️💪

​

06/12/2026

Had a '99 Ford Ranger came into the shop for some much-needed general maintenance and TLC. We didn't waste any time getting her back in tip-top shape!

​Here’s what went down:

●​Cleaned and replaced the wheel bearings (they were looking pretty dirty and loose)

●​Brand new alternator

●​New power steering pump

●​Replaced a broken passenger-side rear leaf spring

​Sorry we didn't get many pictures of this one—the team knocked it out so fast, it was rolling down the road before we could even grab the camera!

​No job too big, no job too small. Bring 'em on in!
​

06/12/2026