TransLab Performance Transmissions LLC.

09/19/2026

09/11/2026

John Gregorys K AWD transmission and tcase wrapped up.

BF gear straightcut synchro set
MFactory L*D
BFGEAR HD 4.4 final
Translab 6th cuff
PPG tx gearst

Next up SF billet cased AWD BF PPG and Albins joint.

HMU for deals on parts

Gearx PPG BF MFactory Synchrotech Speedfactory Drag Cartel

09/10/2026

ATTN IN THE PITS!!!

The 8 second proven Synchro AWD B Top Eliminator synchro gearsets are now back in stock following our latest production run!!!

Those of you that pre ordered thank you. They will ship starting Monday. Those that have waited...

Gonna do a deal on all of them for the FWD AND AWD B as well as H22 sets.

Use code ELIMINATOR at checkout and save 150 per set. the code is good once per customer but tou can purchase as many as you like.

Cuffs and final drives are available as well for all 3 versions. These sets are the best deal onnthe market for a proven 8 second gearset synchro option!

They can also be faceplated bynliberty and a number of guys have done so.

links below!

THANKS GUYS!!!







AWD B Top eliminator sets:
https://translabperformance.net/products/gear-x-usa-fwd-honda-b-series-awd-sbxmtop-eliminator-synchro-kit-1-4

H22 Top Eliminator sets :
https://translabperformance.net/products/translab-h22-top-eliminator-synchro-gearset

FWD B Top Eliminato sets:
https://translabperformance.net/products/gear-x-usa-fwd-honda-b-series-top-eliminator-synchro-kit-1-4-with-cuff

08/28/2026

Some stuff on sale and available again:

Speedfactory FWD billet bellhousing 2800

GEARXUSA Outlaw FWD, H22 or AWD B Dogoxes
6995 (300 off)

B FWD AND AWD AND H22 Top Eliminator kits 3245
GEARXUSA HD AWD B 4.0 finals 800
GEARXUSA FWD B final drives 725
GEARXUSA Gen 1 drag 1 K20 kits 2350
GEARXUSA Gen2 Drag 2 K20 kits 2450
GEARXUSA 4.058 AND 4.40 FINAL DRIVES 764

Translab billet PRECISION AND M&M CUP HOLDERS 250

BFGEAR HD K20 4.7 FINAL DRIVE 1400 REG 1550
BFGEAR B AWD SYNCHRO SET 2500
BFGEAR STRAIGHTCUT SYNCHRO K KIT 2900

Translab Billet Wago VC carriers 400
Translab Billet K and B Tcase plates 150

Mfactory L*D FWD K B H L*Ds 749

Translab billet K series 5th or 6th cuffs 500
Translab billet input thrust tools 140
Translab billet CSS block plugs 40

OEM K 4.38 or 4.7 finals 250
OEM B16 4.4 finals 250

VERY CLEAN
PEP1 SBXM transfercase 300
PBX2 SBXM transfer case 250

Holler. The bellhousing won't last and zi only have 1 at the price. After these are gone 6995 will be a thing of the past as well.

The Outlaw dogboxdogboxeses only 2 of each at that price:)

Thank you as always guys!!!

08/27/2026

Translab GearX H22 Top Eliminator gearset 4.0 Final drive and Mfactory LSzd going in this joint for my guys at S1

Donthe math checkntonight and hopefully button her up so I can plug away on the Accord a bit :)

HMU!

translabperformance.net

all shipping is free in the US with code freeship

08/26/2026

Slapping together a H22 transmission for my boys at

TRANSLAB Top Eliminator
4.0 FINAL
L*D
Fresh diff bearings
Synchrotech master kit..
and some Speedfactory detents.

Thank you guys for all the help with the Accord!

.net

08/26/2026

4 backordered Translab billet cuphilders for PPP and MnM shifters ready to go. These can be mounted on either side and the mount is offset to be able to raise or lower it.

The mount uses the same two holes the shifter plates do and come with .250 spacers to sit it off the shifter if you like as well

The are super solid tough anodized and look great

Holds Faygos Tall boots and your ladies venti mocha s**ts ;) Or yours if you sweet like that

08/20/2026

Scott Nemecs GEARXUSA OUTLAW FWD DOGBOX in the slab with billet case and TransLab L*D.

Need to get the outer case out to coating after setup and onto the next :)

hit me up and check the site !

translabperformance.net

08/20/2026

Blingy ass woolies box on deck.

Math test next verify in windowbthen send outer for vaporhone ..

I'll be having my own machine soon as my utility closet is complete :)

Stay tuned!

hit me up

translabperformance.net

08/15/2026

Wastegate dump done.. Tacked up and will finish weld next week. another thing off the list. turned out pretty decent :) Bought some ACE RACE tight radius pie cuts to save time. It's not super short as want to grt thst s**t iut of the bay... but it corkscrew into place and isnt long enough to be a huge problem. Will probably put a tab onto it that attaches to the down pipe to stop any possible movement.

The Downpipe can be finish welded on the last pipe as well now and well leave it all alone until its running and goes to see Daddy for a cutout and some full exhaust oval tube for the muffler all the way out the back ;)

Tommorow I'll have the other silicone 90 and 2 90 degree 1.25 alu bends to do the other radiator coolant pipe as well.

Only thing left up front is the catch can and front driveshaft loop setup. I'm waiting on the loop as the tcase needs to be in it and I dont feel like doing all that in and out s**t since I still want the halfshaft t case and ds axle out of it till it's wired for easy access.

Getting there. Can't wait for people to see it after we polish her all up when she's done

Thanknyall for comin along for the trick s***s rebirth