Kaibab Automotive and Fabrication

Kaibab Automotive and Fabrication Automotive and fabrication

Knocked out a quick set of lower control arm mounts on this wrangler to replace the flimsy bent ones.
02/10/2022

Knocked out a quick set of lower control arm mounts on this wrangler to replace the flimsy bent ones.

Here’s a couple quick pictures of this xj I finished a few weeks ago. The front end got tube sleeves, inner c gussets an...
12/08/2021

Here’s a couple quick pictures of this xj I finished a few weeks ago. The front end got tube sleeves, inner c gussets and a truss. That should keep the axles from bending.

Here’s some quick pics of the Land Rover that I just finished up. We installed an twin air compressor in the rear panel...
11/08/2021

Here’s some quick pics of the Land Rover that I just finished up. We installed an twin air compressor in the rear panel compartment. The fit on this is so tight it almost didn’t fit. We then took a stock Land Rover air tank that is meant to mount to the driver side frame rail to supply air to the air ride, cut off the mounts and mounted it on the passenger side. The twin air compressor is hooked to the tank for on board air. We also installed a complete HAM radio system. The head unit is mounted by the rear view mirror. The base units is tucked away under the drivers seat and the auxiliary speaker is mounted above the middle seats.

Address

3660 N Romero Road
Tucson, AZ
85705

Telephone

+15205262730

Website

Alerts

Be the first to know and let us send you an email when Kaibab Automotive and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share