CG Welding and Marine Services LLC

07/19/2022

Customer wanted a fresh water engine flush for a pair of Cummins QSC that we just got done doing a 500hr service on. Fabricated some new elbows and plumbed them up to accept a garden hose.

07/19/2022

Been to busy to really post on here. This is some recent fabrication work completed for ST Hudson Engineers. Two separate 25’ retired Coast Guard boats up fitted for survey work.

09/24/2021

03/08/2021

Some genset repairs new sea water pumps, jacket water pumps, thermostat housings, and heat exchangers, new hauler valve and plumbing, and new access ladder for the top deck. F/V Atlantic star, Wildwood Crest.

03/08/2021

Taft rail mounting bracket repair and another generator platform for ST Hudson engineers diving division.

03/08/2021

Another custom sonar mount, along with generator platform, kicker motor mount, air conditioner and full wiring for 110volts, for ST Hudson Engineers on its way to Texas.

09/25/2020

Another sonar rig out the door. Reinforced starboard gunnel and installed a hinge sonar mount, Fabricated a removable Davit for a tow fish on the port side.

06/20/2020

New aft rub rails welded on today. Atlantic City Sea Tow, Jennie Lee.

06/07/2020

After a long 4 months and almost 500hrs of labor I’m happy to say this job is a wrap. Well for the summer atleast. From fabricating a new galley, wrap around wheelhouse seats, multiple removable gates for boarding, all new stainless deck drain piping, stainless raw water intake piping and exhaust shower head piping, all new plumbing for bathroom and HVAC systems, cut and and replaced all generator exhaust piping, rebuilt the mast and moved all the antennas. Also did 500hr services on all 3 John Deere main engines, completely rewired every 12volt and 24volt system from new chargers to new battery switches and all new wiring over 500’ of battery cable. So many other projects we tackled but I’m not going to go on all day. F/V ATLANTIC STAR, Wildwood crest. Thank you Andrew Cicchitti and Starlight Fleet for your continued business!

07/18/2019

Seems like this is the summer for 1000hr services. Here’s another one on a Carolina Classic. New to customer boat, was serviced by unnamed company in Virginia. We will attempt to repair these aftercooler cores since Cummins informed me that there are none of these available in the WORLD..... stay tuned.

06/20/2019

Customer was complaining of the port engine ecm popping the fuse. After some troubleshooting found a faulty lift pump. These lift pumps are known for failing so we went ahead and replaced pumps on both engines.

06/15/2019

Knocked out another 1000hr service. This one was for Townbank fire.