Syndicate Performance

Syndicate Performance Here at Syndicate Performance we are striving to push the limits of creativity to enhance our cars!

***Feeler Post*** Now that I have both designs tested and am happy with the results I am getting closer to production, I...
09/01/2023

***Feeler Post*** Now that I have both designs tested and am happy with the results I am getting closer to production, I would like to get a head count of how many people would like a Coolant Neck or Thermostat Housing or both. Right now I am speculating pricing at $200/piece with 50% deposit for preorder ($100) and 50% when they are ready to ship. Price will include shipping, and hardware for mounting. I wont be including any fittings to keep prices as low as possible and since everyone's setup will be vastly different it would be erroneous to include them. I am hoping to send out preorder invoices within the next couple of weeks. Below I will have all the ports on each piece to hopefully answer some questions you may have about the pieces! Both pieces work for Z6 and Y8 style coolant ports.

Coolant Neck:
1" NPT Main Outlet (Adapters for 12an, 16an, 20an, 28mm barb (1-1/8"), 32mm barb (1 1/4").
3/8" NPT Bottom (Adapter 6an for turbo coolant).
2- 1/8" NPT Top (Coolant Temperature and Pressure)
O-Ringed Mating Surface (0.070 Viton O-ring included)

Thermostat Housing:
1" NPT Main Outlet (Adapters for 12an, 16an, 20an, 28mm barb (1-1/8"), 32mm barb (1 1/4").
M18x1.5 (Stock fan switch port).

Just a quick update since I have been extremely busy with school! Finally got ahold of a Y8 thermostat housing and was a...
08/28/2023

Just a quick update since I have been extremely busy with school! Finally got ahold of a Y8 thermostat housing and was able to complete a prototype Z6/Y8 Thermostat Housing adapter! This kind of works in conjunction to the 90 degree coolant outlet neck I designed not to long ago, I had many people reach out and ask for a better solution for the thermostat housing so here is my revised prototype, it has a 1" NPT so you can attach 12an, 16an, 20an or barb fittings for rubber hoses and it also has the M18x1.5 port for the factory fan switch if needed! I designed it straight to hopefully aid in line routing and for more clearance for guys running scatter shields. Thank all of you again for your continued support of Syndicate Performance

P.S The photos on the engine are on the Z6 housing, the photos of the housing in my hand are on a Y8 housing!

1st day of Motorsports Vehicle Technology class, insane to be excited and back in school at almost 30! This school is so...
08/15/2023

1st day of Motorsports Vehicle Technology class, insane to be excited and back in school at almost 30! This school is so awesome

Update to my update! Since I had so many people commenting and asking I spent quite abit of time last night and hammered...
08/09/2023

Update to my update! Since I had so many people commenting and asking I spent quite abit of time last night and hammered out the 90 degree coolant neck design and got a prototype printed up today! Everything is looking really good so far since I had all the geometry from the straight piece figured out, I need to get some longer bolts just to double check fitment which should not be an issue. But this should be indicative of what the final design will quintessentially be. Hopefully everyone is pleased with the design and can start doing preorders in the near future. Thank you all again for your support!

Just a quick update for all the guys asking, I mainly designed this to be used as a swirl pot adapter BUT I am developin...
08/09/2023

Just a quick update for all the guys asking, I mainly designed this to be used as a swirl pot adapter BUT I am developing a 90 degree coolant neck adapter as well! It will have all of the features as the straight adapter it is just taking me longer to develop due to the complex internal flow channel shape. This is not representative of the finished product as I still have much work and testing to do with this piece, just wanted to show everyone I am in the process of development of said piece. Thank you again for all of your support!

The latest project I have been working on, a coolant neck adapter that is multifunctional. This coolant neck will allow ...
08/08/2023

The latest project I have been working on, a coolant neck adapter that is multifunctional. This coolant neck will allow any outlet with a combination of 1" NPT fitting, so whether you want to run 32mm barb for rubber or -12, -16 or even -20 braided lines you can! The housing face is channeled in the rear for a 0.070 Viton o-ring which will help sealing and no more silicone gasket maker. Also featured on the coolant neck are 2- 1/8" NPTs for coolant temperature and coolant pressure, this can be critical on boosted applications to know if you have lifted the head or if your head gasket isn't sealing properly! Finally the last fitting is a 3/8" NPT, I designed this to be used in conjunction with a 6an adapter for a return line for turbo coolant! This mitigates having to run excessive amounts of hose or trying to adapt fitting on the other side of the block. I will also be working working on a Thermostat housing version of this piece in the near future! Thank all of you again so much for all of your support

Batch 2 🤌🤌🤌
07/27/2023

Batch 2 🤌🤌🤌

What's up everyone! I have had such incredible feedback and interest from everyone regarding the tensioners and timing p...
06/05/2023

What's up everyone! I have had such incredible feedback and interest from everyone regarding the tensioners and timing pointers, so thank you for that! I am looking at running a another batch of both parts for anyone that hasn't gotten a chance to grab either piece yet, the tensioners will be $300 with hardware and shipping included with a non-refundable 50 percent deposit upfront and the timing pointers will between $250-$300 depending on the amount of orders. I am hoping to send the order off in the next couple of weeks so if you would like one of these pieces please comment or message me!

Well today is my 29th birthday, spent most of the day printing labels for customers packages and finally got the first o...
05/30/2023

Well today is my 29th birthday, spent most of the day printing labels for customers packages and finally got the first order on the way! Even have a piece going over the pond to the UK, I really can't wait to get feedback from everyone on the timing belt tensioners! Thank you to everyone again for the support

Finally got the billet timing belt tensioners back from machining! These turned so incredibly nice and I can't wait to m...
05/23/2023

Finally got the billet timing belt tensioners back from machining! These turned so incredibly nice and I can't wait to make more awesome pieces in the future! Thank you to everyone for the support

I know a lot of people knock Harbor Freight but I will say the last year or so they have seriously stepped up their qual...
05/07/2023

I know a lot of people knock Harbor Freight but I will say the last year or so they have seriously stepped up their quality! I've never really been a brand specific guy, but I definitely find myself shopping there more and more often! This jack is probably one of the nicest jacks I've seen and definitely owned and it was only $200 bucks... You really can't beat that

Address

Toccoa, GA
30577

Website

Alerts

Be the first to know and let us send you an email when Syndicate Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category