MurCar

08/28/2026

Dropping weight anywhere we can, factory 23-gallon F-150 fuel tank vs our custom 13-gallon aluminum tank.

Factory tank + straps: 31.05 lbs
MCR aluminum tank: 15.30 lbs
15.75 lbs of weight savings before even factoring in the reduced fuel capacity.

With 10 gallons less fuel capacity, that’s roughly another 66 lbs saved on E85 — for a potential total savings of around 82 lbs when comparing both setups full.

Direct-fit design that accepts the OEM fuel pump hat or aftermarket stock-style fuel pump hats — no custom fuel cell setup required.

Lightweight, direct fit, and built for performance while still having enough capacity to enjoy the truck on the street.

08/22/2026

Before the week ends, a little PSA.

For everyone who calls or emails us asking how to set up their car, then intentionally or unintentionally goes back and forth with us about how their car is supposed to be set up, what wheels to run, suspension setup, or what should be changed because your builder/tuner/friend/mama said to do this or that…

Respectfully, they aren’t doing this ⬆️ and making it look this easy — especially on a soft tuneup.

MurCar / KellTrac spec’d suspension + supporting mods, w/MCR Wheels. 10R80 Lund Racing Fast Forward Race Engines

We’re always willing to help our customers and share what we’ve learned from actually doing this stuff, testing it, and proving what works. But some of y’all are going to ruin it for everybody else 😂

Going forward, if you’re not spending money with us, the free setup advice is going to be very limited. There’s a difference between asking a question and asking us to help develop a combination somebody else is getting paid for.

No hard feelings. Just keeping it fair for the people who actually support us. 🤝

Sincerely - The street S550 roll papi 🫡

08/17/2026

NA boys… you can put the bumper back on now 😂

We know why you took it off — WEIGHT.

But weight reduction is only part of the equation… aerodynamics matter too. 💨

Running without a front bumper leaves the front of the truck wide open, letting air hit everything behind it and creating unnecessary turbulence.

So we decided to do something nobody else has. 👀

Introducing the MCR Composites Fiberglass Front Bumper — the first of its kind for the F-150 performance market.

Built using premium fiberglass materials and the same quality standards as our carbon fiber components — just made for the guys who want to paint it.

✅ Direct replacement for the factory/OEM front bumper
✅ Premium fiberglass construction
✅ Lightweight, performance-focused design
✅ 100% sealed design to help clean up airflow around the front of the truck
✅ Grille and fog light openings can be cut out by the installer if desired
✅ Paint it any color you want
✅ More affordable alternative to carbon fiber
✅ And your truck doesn’t have to look half-finished anymore 😂

Want maximum aero? Leave it sealed.
Need additional airflow or want the grille/fog-light openings? Cut out what your setup needs.

Available for 2018-2020, 2021-2023 & 2024+ F-150s.

👀 Rear fiberglass bumpers may be coming soon…

What other fiberglass parts would you guys like to see us make? Drop your suggestions in the comments below. 👇

🔥 PRE-ORDER NOW — LINK IN BIO
MURCARRACE.COM

⚠️ PRE-ORDER: These bumpers are currently available by pre-order and are not in-stock items.

⚠️ PHOTO DISCLAIMER: Images shown are draft/concept images for product representation. Final production appearance and details may vary.

*MCR Composites — bringing something new to the F-150 market.

08/07/2026

One of the #1 questions we get about our F-150 wheels is, “How much do they weigh?”

The answer depends on the design and size, but some of our 17” beadlock wheels weigh as little as 24lbs, making them competitive with what’s currently on the market.

The #2 question is, “Do I need a spacer?” With a 28” overall tire, the answer is no.

Our 17” wheel lineup is available in true 17x10 square and 17x11 15x10-11” rear / 15x10 front setups.

Our goal wasn’t to build the lightest wheel on the market—it was to build the right wheel. That meant making the correct widths and offsets so they fit properly without requiring spacers or sacrificing wheel width just to gain clearance. By balancing strength, fitment, functionality, and weight, we’ve created a wheel that’s “street use” and at the track without compromising durability.

We currently offer three different designs in a 6-lug pattern, with even more designs on the way. Each wheel is available in beadlock or non-beadlock configurations, with 2 beadlock ring styles and a variety of color combinations.

These aren’t just for F-150s, either. We can build wheels for a wide variety of platforms in 15”, 17”, 18”, and up to 20” sizes, with both beadlock and non-beadlock options. The same goes for our 5-lug designs.

Build the combo you want today! If you don’t see the exact size, offset, or color combination you’re looking for on our website, send us a message or give us a call. We’re constantly adding new products and updating the site. Murcarrace.com

08/07/2026

Fenders are shipping out! 🔥

We’ve still got a couple sets left in stock and More OTW.

Need new badges too? Full replacement fender badges are available separately or save a couple bucks add them together.

Available @ MurCarrace.com

08/01/2026

Never before seen footage of how 2021+ F150 carbon doors are made…. Enjoy there’s more coming.

07/20/2026

Been saying it over and over, we make the proper wheel for a 315 tire on a s550/s650. I’ve never had the opportunity to do an immediate before and after, but here is a perfect example of the issues on this s650, No changes were made besides a WIDER wheel with same tire 315/50/17 that clears the fender and lets the suspension work! All these videos are examples of the tire smacking the fender which is dangerous, unloads the suspension and also can possibly blow a tire.

I get calls all the time about what spacer to use with the springs etc etc to help clear the fender, yes that matters but these wheels are a big part of the solution to the problem not raising the car until it stops rubbing……. “12” wide wheel
If a big wheel manufacturer copies the sauce wheels ….just know who did it first! Murcarrace.com get yours today!

Notable cars that carry our wheels
Fastest gen2 s550 6r car in the world .lp3
Fastest gen3 roll s550s in the world
And now
Fastest gen4 s650 in the world

07/20/2026

07/14/2026

Gt350 + Daylight turbo kit + Lund tuning = Lots of 🙂s per gallon

Call or email us to schedule your next build