TCE Performance Products

Directions Website Contact the business

TCE Performance Products Custom Big Brake Kit builder & Wilwood Dealer for 34yrs.

Finished up the final test fit and hardware spec on this '71 Monte Carlo custom. 👍👍While it presented a couple of unique...
11/04/2026

Finished up the final test fit and hardware spec on this '71 Monte Carlo custom. 👍👍

While it presented a couple of unique issues we overcame. One big concern was the torque and flex possibility on such a large diameter disc bolted to such a compact spindle. For that reason we went with 1/2" CRS plate and reversed our mounting into the caliper bracket. It was crucial that this monster stay stable and not have any deflection under hard braking.

Also debated were a couple different versions of rotor hats. Settled on the same one that we use on all the 16" Caprice and Impala big brake kits. The alternatives were adding to cost and complexity. By request we installed full length half inch ARP wheel studs which have a great bullnose end on them.

Most everything is now boxed up and ready to ship. All that's left to do is get the brackets anodized and install the ARP studs into them.

What can TCE build for you?

EPB for the specialty cars? We can do that. 🔔🔔📞... "Hey Todd I have a Wilwood kit on the back of my Factory Five Cobra, ...
11/02/2026

EPB for the specialty cars? We can do that.

🔔🔔📞... "Hey Todd I have a Wilwood kit on the back of my Factory Five Cobra, I really want to put an EPB on it. I looked at your awesome kits but there's no way that those kits are going to fit with the suspension on this car." 🤷

No problem my friend we got you covered. How about we produce some custom brackets and we'll put that bad boy up at 12:00? Sold!

Easy install, fits like a glove, happy customer. Just another Day in Paradise 🤣







What can TCE build for you?

So about 5 years ago we built this rear kit for the back of a Dodge Dakota with a factory axle and a 14-in brake kit. Fa...
10/29/2026

So about 5 years ago we built this rear kit for the back of a Dodge Dakota with a factory axle and a 14-in brake kit. Fast forward to a couple of weeks ago and the customer called telling me that he's going to change the entire rear end to a Ford 9 inch custom.

The question became can we find a way to reuse some of what he currently has and make a new bracket for it??

A little work in the in the CAD software and presto we have big Ford new style plugged into the old Dodge plate. 👍

Now if you know Ford 9-inch you understand that you have to use a bearing retainer. Because of the thickness of our base plate that meant we had to make a sleeve for the inner portion of the bearing for the retainer to sit against. I believe we're a little thicker than we need to be right now but after a test fit the customer may be sending those pieces back and we'll grind them to a necessary spec.

Can you reproduce brackets that were on an older Wilwood kit? As long as you can supply a factory spindle / knuckle to w...
10/02/2026

Can you reproduce brackets that were on an older Wilwood kit?

As long as you can supply a factory spindle / knuckle to work from.







What can TCE build for you?

What's better than a big brake kit on an early Thunderbird? Two Thunderbirds of course! Oddly enough these two projects ...
10/01/2026

What's better than a big brake kit on an early Thunderbird? Two Thunderbirds of course!

Oddly enough these two projects have been running side by side on the bench. It was neck and neck as to who was going to get completed first. And the winner is: our Customers!

Both 1962 Ford Thunderbirds. Both built on 13-in FNSL6 Caliper applications. The real kicker is that one of these had the original drum brakes on it. The other had a retrofit disc kit on it.

In the case of the drum spindle we rehabbed the stock hub and bearing. On the disc spindle we re-machined the disc to use as the hub. Both systems work well but the disc spindle clearly has a significant difference in wheel mount offset, I believe the hat is about 3/8" deeper on the disc spindle meaning a wider track width.

Another side benefit is that the customers can choose whether they wish to have this kit installed FS for front spindle or RS for rear spindle. Given the car is rear steer at this time there is enough room above the steering arm to go RS mount.





Audi TT track kit- let the fun begin!13" directional rotors and six pot race calipers with Thermloc pistons and BP30 rac...
09/10/2026

Audi TT track kit- let the fun begin!

13" directional rotors and six pot race calipers with Thermloc pistons and BP30 race pads. Get 'er done we will.

Built to allow our customer to consider 14-in diameter discs at a later date. I don't really feel that's going to be necessary but it's clearly on the table. The other kicker here is an extremely shallow offset. We had considered the much larger bodied Aerolite line of calipers but it was just not going to fit inside the wheel.

With a terminal speed of perhaps 120 mph I feel this is going to be quite ample for most of his use. The insulated pistons combined with the BP30 track pads should give him plenty of fade resistance and no overheating of brake fluid.

Top loading brake pads should allow for easy change out should he decide to run the car on the street or participate in autocross events.

*Red calipers and drilled & slotted rotors for mock-up purposes only. Bill of materials includes race calipers and slotted rotors as shown in the images.

Electric Parking Brake retrofit kits -  a simple solution for a nagging problem. We got you.If you have a Wilwood rear a...
08/28/2026

Electric Parking Brake retrofit kits - a simple solution for a nagging problem. We got you.

If you have a Wilwood rear axle kit from the past 20 years or more and really would like to add that new electric parking brake... TCE has you covered.

Our rear EPB retrofit kit includes the complete electric parking brake system from Wilwood- based on your size requirements, as well as two different options for mounting brackets.

These images, supplied by a customer yesterday, referenced how very easy the installation of this system is.

Why are you waiting? Update your ride today!

What can TCE build for you?

As much as we like using Wilwood products sometimes we simply have to think out of the box. Custom rotor hats are not ou...
08/22/2026

As much as we like using Wilwood products sometimes we simply have to think out of the box. Custom rotor hats are not out of the question.



What can TCE build for you?

Back to the big stuff today! Custom Caprice front kit. But this one is fit to some custom fabricated 4-in lift spindles!...
08/13/2026

Back to the big stuff today!

Custom Caprice front kit. But this one is fit to some custom fabricated 4-in lift spindles! That created quite the challenge since the standard mounting holes for all of our Caprice kits were not applicable.

This required modification to the fab parts and a rather unusual radial mount bracket. Because the calipers sit so low down in no man's land we had to produce a bracket rigid enough to support the free floating requirement. Pair that with some larger hardware to control any type of deflection.

So far the rest of it turned out just fine. *Please note when you have custom spindles you have to specify what size inner wheel bearing you require so we can match our hub assemblies to your spindle!! In this case sets 3 & 6-- which are not standard on early Caprice.

**New people: that's our "rotor plate" in use.

What can TCE build for you?

...... Some days I really should just stick to working on brakes 😕
08/01/2026

...... Some days I really should just stick to working on brakes 😕

Address

1302 W 23rd Street Suite 106
Tempe, AZ
85282

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 10am - 2pm

Alerts

Be the first to know and let us send you an email when TCE Performance Products posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TCE Performance Products:

Shortcuts

Sponsored

Share

Nearby autos & automotive services